Evoq Posted at 5-1 04:21
The CE region Avata 2 drones use Tri-band frequency 2.4-5.1-5.8 it doesn’t eliminates the 5.1Ghz now if u apply HAM file(it will increases the RF output) signal that’s all, to test this accurately you need RF modulator (madtech Ian) has done the test you can find his latest video on YT

CE MODE

Where do you have such data from? You copied this from one of the blogger's videos. But there is no such data that you write, thereby fooling the people.

Oleg-5 Posted at 5-1 06:07
Where do you have such data from? You copied this from one of the blogger's videos. But there is no such data that you write, thereby fooling the people.

here is official screen gab from DJI site

link to download it : https://www.dji.com/uk/avata-2/downloads

here is link to Madtech Ian he done the RF test with Avata 2 : https://www.youtube.com/watch?v=tYxNGoEXU3s

here is comparison screengrab before the HAM file and after :

Oleg-5 Posted at 5-1 06:07
Where do you have such data from? You copied this from one of the blogger's videos. But there is no such data that you write, thereby fooling the people.

Hey Oleg, there is discussion about this topic you can have quick look few members have been using this file https://forum.dji.com/thread-311597-1-1.html#pid3302766

Oleg-5 Posted at 5-1 06:05
You're masking the problems. Similarly, many people had problems with AVATA-1.  Similarly, some users had a sharp drop and AVATA flew away after the impact.  There are a lot of videos on the web and in chat rooms.   Later, they released a new firmware, but did not indicate which problems were solved.   And your forum is only for beginners who can be fooled or sent somewhere.  You are afraid to admit the problem.

Sorry for the inconvenience caused. DJI Avata 2 is built with Propeller Guard. The resistance of lateral flight will increase to a certain extent while improving safety performance. In a windy environment, sudden lateral braking may occur when turning at high speed. Please refer to the cautions on the User Manal above.
If your attitude is unstable, please pay attention to the flight environment and fly safely.

Im not sure if the goggles 3 have bluetooth, but an audio source out put (wirelessheadset), as well as playback IN would be amazing,

djiuser_0ZXG5MK2wpWJ Posted at 5-2 16:14
Im not sure if the goggles 3 have bluetooth, but an audio source out put (wirelessheadset), as well as playback IN would be amazing,

They do have bluetooth (I imagine only BLE, so no audio support possible), that's how your phone with DJI Fly can show nearby Goggles 3 with wifi live view sharing enabled even before it's connected to that wifi. You can get audio output with USB-C earphones or with an USB-C audio adapter that has a built-in DAC. But Avata 2 doesn't have a microphone anyway, if live audio from the aircraft is what you're after.

Does AVATA 2 have a panoramic photo mode?

vid3 Posted at 5-9 14:49
Does AVATA 2 have a panoramic photo mode?

Not automatically, there's only a single-shot photo mode, but you can manually take several photos from the same spot at different angles and auto-stitch them into a pano in post. You don't have to be particularly precise either, just move a bit to the side several times, then move the gimbal down and go back the other way a few times and repeat as much as you like to capture all the details you want.

Example of several photos stictched in post (from Avata 1, but would be same process with new one):

Very nice. I take 360x180 panoramas from a tripod. Avata 2 has a good camera and a wide gimbal range. The only thing missing is automation of the continuous shooting process with gimbal/vertical axis shift. With this in mind, I bought this drone. I'm a bit disappointed. You don't need much to be happy. Is there any hope for this feature to appear?

vid3 Posted at 5-9 16:02
Very nice. I take 360x180 panoramas from a tripod. Avata 2 has a good camera and a wide gimbal range. The only thing missing is automation of the continuous shooting process with gimbal/vertical axis shift. With this in mind, I bought this drone. I'm a bit disappointed. You don't need much to be happy. Is there any hope for this feature to appear?

What made you think Avata 2 could do panoramas automatically? The product page doesn't mention anything like it and specs clearly list single shot mode as the only way of taking photos. It would certainly be technically possible and you can try asking DJI for that feature, but I don't see it happening in an FPV drone. It's a wonder we even get photo mode at all

vid3 Posted at 5-9 16:02
Very nice. I take 360x180 panoramas from a tripod. Avata 2 has a good camera and a wide gimbal range. The only thing missing is automation of the continuous shooting process with gimbal/vertical axis shift. With this in mind, I bought this drone. I'm a bit disappointed. You don't need much to be happy. Is there any hope for this feature to appear?

Hi, vid3.  Thank you for reaching out. Regretfully, we don't have any information about this yet but I will take it as a suggestion of yours and will forward it to our designated team for attention. All significant suggestions will be implemented after the evaluation of our relevant team. For the latest updates please stay tuned to our DJI official website at ( www.dji.com ). Thank you.

djiuser_0ZXG5MK2wpWJ Posted at 5-2 16:14
Im not sure if the goggles 3 have bluetooth, but an audio source out put (wirelessheadset), as well as playback IN would be amazing,

Hi, djiuser_0ZXG5MK2wpWJ. Thank you for reaching out. Currently, The Goggles 3 cannot be connected to Bluetooth earphones but I will take it as a suggestion of yours and will forward it to our designated team for attention. All significant suggestions will be implemented after the evaluation of our relevant team. For the latest updates please stay tuned to our DJI official website at ( www.dji.com ). Thank you.

Here you go!  A nice new update

I Hope there will be HLG ColorProfile added in the Future

Nice upgrade

Still waiting o3 air unit compatible with googles 3 and rc3

• "Added support for use with DJI RC Motion 2 and DJI FPV Remote Controller 2 when used with DJI Goggles Integra and DJI Goggles 2."
  

I can't believe there won't be an update for the DJI FPV Controller 2 with Goggles 3. Why didn't they do a complete update for all older equipment? Can someone explain this to me?

Damn this is exactly what bardwell predicted. Kinda do what you ask but do it in such a way you still did not get it at all.

No goggled 3 with fpv remote 2?
No o3 support?
And lastly even after downloading the newest version of assitant 2 (consumer drones) the newest version for fpv remote 2 is still v02.00.0900? So even the update with goggles 2 does not even exist??!?!?!

djiuser_l9PzNOBglQuw Posted at 5-28 06:10
I Hope there will be HLG ColorProfile added in the Future

Hi, djiuser_l9PzNOBglQuw. There has been added support for display color restoration in D-logM/HLG mode. Please see this post.

Ian in London Posted at 5-28 05:08
Here you go!  A nice new update  

https://youtu.be/ZC_8sFQYc_E

Thank you for sharing this, Ian. Glad that you like the new update. Have a safe flight always!

Fozando Posted at 5-28 06:24
Nice upgrade

Glad that you like the new update. Have a nice day!

FSA Adobe Posted at 5-28 06:41
Still waiting o3 air unit compatible with googles 3 and rc3

Hi, FSA Adobe. We'd like you to know that we appreciate your valuable suggestions. We will forward your concern to our related department. All significant suggestions will be implemented after the evaluation of our relevant team. For the latest updates please stay tuned to our DJI official website at ( www.dji.com ). Thank you for your understanding and support.

Can we use the RC2 while using Avata 2 and Goggles 3 now?

jefersonalessan Posted at 5-28 06:41

"Added support for use with DJI RC Motion 2 and DJI FPV Remote Controller 2 when used with DJI Goggles Integra and DJI Goggles 2."

I can't believe there won't be an update for the DJI FPV Controller 2 with Goggles 3. Why didn't they do a complete update for all older equipment? Can someone explain this to me?

Hi, jefersonalessan. Thank you for reaching out. We can't promise this compatibility however, we'll take it as a suggestion and forward it to our relevant team. Thank you for your kind understanding.

tame421 Posted at 5-28 07:04
Damn this is exactly what bardwell predicted. Kinda do what you ask but do it in such a way you still did not get it at all.

No goggled 3 with fpv remote 2?

Hi, tame421. We're sorry to disappoint you with the new updates. I will forward your feedback to our relevant team. take it as a suggestion and forward it to our relevant team.  After the evaluation of the related department, significant suggestions or requests will be implemented via the firmware update, app update, etc. For any updates, please stay tuned to the latest news on our DJI official website at (www.dji.com). Thank you for your kind understanding.

Seem very slow this one to propagate across the servers, As I said at the start sadly there was always the feeling of a hard line between G3 and FPV RC 2, two different RC systems and DJI would need to do a fair chunk of work to resolve that. TBH its likely what's causing the O3 delays on G3.

Nice to see DJI Add 4K 100 as it means you now can have low latency in 4K mode.

0300 FW update isn't being offered through DJI Assistant 2.

jefersonalessan Posted at 5-28 06:41

"Added support for use with DJI RC Motion 2 and DJI FPV Remote Controller 2 when used with DJI Goggles Integra and DJI Goggles 2."

I can't believe there won't be an update for the DJI FPV Controller 2 with Goggles 3. Why didn't they do a complete update for all older equipment? Can someone explain this to me?

Goggles 3 use a different transmission protocol (O4 vs O3 on Goggles 2/Integra) and RCM3 ad FPVRC3 now connect straight to goggles instead of the aircraft, there's no way to connect a separate controller directly to Avata 2 becauce Goggles 3 are the only link to it. With Goggles 2 and Integra, my guess is Avata 2 will work in a sort of backwards compatibility mode as an O3 drone and you will lose out on some performance enhancements in O4 transmission when using old goggles.

Mads Tech Posted at 5-28 08:33
Seem very slow this one to propagate across the servers, As I said at the start sadly there was always the feeling of a hard line between G3 and FPV RC 2, two different RC systems and DJI would need to do a fair chunk of work to resolve that. TBH its likely what's causing the O3 delays on G3.

Nice to see DJI Add 4K 100 as it means you now can have low latency in 4K mode.

Looking foward to you testing 4k 100fps latency. Might well still have high latency. But would be fantastic if it was as low ad 1440p 100fps.

Hi there !

The updates doesnt show in DJI assisant 2

For me the updates also don’t show in DJI assistant 2

No updates for me in the DJI Fly app

Nevermind, I needed to update the app on my iphone

Hi there, did they add LUT assistant for Avata 2 recording in D-Log ?

AEROVISUALES Posted at 5-28 11:29
Hi there, did they add LUT assistant for Avata 2 recording in D-Log ?

Not exactly, but there's a fixed correction that you can turn on or off, much better than the "enhanced display" thingie that they tried first.

So you have to update your application on the phone first in order to see the update.

Then update the devices.. Then find out the DJI FPV RC 2 isn't compatable still with Goggles 3.

jefersonalessan Posted at 5-28 06:41

"Added support for use with DJI RC Motion 2 and DJI FPV Remote Controller 2 when used with DJI Goggles Integra and DJI Goggles 2."

I can't believe there won't be an update for the DJI FPV Controller 2 with Goggles 3. Why didn't they do a complete update for all older equipment? Can someone explain this to me?

It's really stupid. I held onto my FPV RC 2  and sold the rest in hopes. But I guess that was my fault hoping they would allow you to connect the FPV RC 2 to the Goggles 3. Guess I am going to sell all now and just use only home built stuff which allows me way more freedom anyways.

With these updates, can I fly the Avata 1 with the Goggles 3, MC 3 and RC 3?

Is this firmware update being rolled out slowly? I don't have access to it. I have the Avata 2, Goggles 3, and both the motion controller 3 and Controller 3. When I connect my DJI Fly app to the Goggles 3, It says my firmware is up to date and it is not the new FW.

Props Posted at 5-28 19:17
Is this firmware update being rolled out slowly? I don't have access to it. I have the Avata 2, Goggles 3, and both the motion controller 3 and Controller 3. When I connect my DJI Fly app to the Goggles 3, It says my firmware is up to date and it is not the new FW.

Update your DJI FLY APP through DJI website. It doesn't update from within the app on android. You need to re-download it from DJI website.

Tell me please. When will there be a firmware update for Avata2 via Dji Assistant? I don't have a Goggles 3 helmet. Only avata2 and goggles2 helmet