IDK what is going on with the new Firmware but I don't like it. I installed in Friday night with no issues. Over the weekend I flew my Mini 4 Pro a handful of times at different location. It now takes 2-3 minutes once the RC2 and the drone are turned on to go from a black screen view to a live screen. I sure hope a patch is coming soon.

fansd91f6f34 Posted at 4-15 01:27
Is yours C0 or did you change it to C1?

Reclassed to C1 about month ago.

laszlo Posted at 4-15 04:24
IDK what is going on with the new Firmware but I don't like it. I installed in Friday night with no issues. Over the weekend I flew my Mini 4 Pro a handful of times at different location. It now takes 2-3 minutes once the RC2 and the drone are turned on to go from a black screen view to a live screen. I sure hope a patch is coming soon.

Had the same problem, cleared the cache and now it boots fast again. Check it via Profile - Settings - Storage - RC internal storage section - Clear app cache.
Deleted more than 1.1GB of temp data that left after update. All the settings remained, just offline maps were deleted too, so these needed new download.

harweyko Posted at 4-15 07:54
Reclassed to C1 about month ago.

Well, at least DJI has already corrected this problem with the LED lights on the C1.
Now, let's see if they also give us the option to keep them always on, for those of us who continue with C0.

The batteries work perfectly when it comes to charging. However, soon the message "NON-DJI battery detected (Photos) started to be shown. From that moment on, the drone only takes off with the battery that accompanies it. So far I have not found any resolution on the forum or in the related community. A big waste of money, I know they weren't original but I read the reviews that said they worked perfectly and a similar error was never reported. HELP???

I changed my blades to Master airscrew stealth. I now get a a P Mode icon instead of N for normal. I am getting mixed answers from the web. How do I turn off P mode and get back to Normal ?
Mini 4 pro
Thanks

Greetings,

Today received my DJI Mini 4 Pro and it stopped working after firmware update.
The aircraft and remote control (RC2) unit failing to re-connect to each other back again.
Its strange, the green light indicates that all suppose to be good, but when open "camera view" via "connection guide" it says "aircraft not connection to RC" and black screen.
I checked all the forum related topics about the re-connection issues and none of them helped me.
The software "DJI Assistant 2" also is not capable to communicate to aircraft, but it is connecting to remote control and firmware "refresh" has been performed.
When from "DJI Assistant 2" i choose my "DJI Mini 4 Pro" in the next stage it goes into never-ending loading process.

Any bright ideas?

laszlo Posted at 4-15 04:24
IDK what is going on with the new Firmware but I don't like it. I installed in Friday night with no issues. Over the weekend I flew my Mini 4 Pro a handful of times at different location. It now takes 2-3 minutes once the RC2 and the drone are turned on to go from a black screen view to a live screen. I sure hope a patch is coming soon.

Same here! A very noticeable boot time delay and it even crashed the controller OS while booting up.  Flew 4 times so far with the same slow boot time results.  And it shows I'm flying in the P Mode, and I have not made any mode selection changes!!!

djiuser_a0d9NcxOW7SL Posted at 4-16 10:43
I changed my blades to Master airscrew stealth. I now get a a P Mode icon instead of N for normal. I am getting mixed answers from the web. How do I turn off P mode and get back to Normal ?
Mini 4 pro
Thanks

seems there was P-mode in the past, renamed to N-mode in 2022 and they now changed it back to P-mode? (on purpose or by mistake, we'll see)
https://forum.dji.com/thread-270550-1-1.html
https://www.tomstechtime.com/position-mode

EDIT: so it was just a bug that is now repaired in new FlyApp version (see around 4:50):

harweyko Posted at 4-17 02:30
seems there was P-mode in the past, renamed to N-mode in 2022 and they now changed it back to P-mode? (on purpose or by mistake, we'll see)
https://forum.dji.com/thread-270550-1-1.html
https://www.tomstechtime.com/position-mode

Unfortunately no update for the RC2 yet (neither DJI Fly app, nor firmware)

Firmware 500 arrived by air, but it is not in the Assistant.
DJI why is there no information on the website?

Firmware v01.00.500 arrived by air, but it is not in the Assistant.
DJI why is there no information on the website?

Frank071 Posted at 4-18 01:09
Unfortunately no update for the RC2 yet (neither DJI Fly app, nor firmware)

same here (Germany), no DJI Fly app update available. Still stuck to 1.13.0 on the RC2.

It seems we now need to be very careful before applying an update, following the principle "If it ain't broken, don't fix it"... I first read information provided by DJI, then try to find additional information in this forum, and finally wait until one of the drone "masters" created a video on youtube.... and only if requried and proven reliable, I start updating.

There are so many administrators on the forum that sometimes several administrators answer one question at once. But no one answered the current and important question with the drone firmware with the difference in Fly and Assistant and in the profile topic. DJI what's going on with the firmware? Why don't you answer pressing questions?

vispol Posted at 2023-9-25 13:22
DJI Mavic Mini 4 Pro , does it have a Finger Pan?

Likely because the pilot can use Yaw to turn left and right.

Is this the update which made my remote u workable? I’ve not had any response from it since the update, though it clearly links with the drone without any issues.

The lack of non-communication from officials regarding the FIRMWARE of the drone is astonishing.
Its not like we are discussing ND filters or whatever third-party stuff.
Meh, guess the software developers moved on to coding firmware for the power stations, the new Avata or whatever new is in.I guess the power stations need real coding, unlike the newest and most commercial small drone there is.

Mini 4 Pro is not maintaned properly, even if its not even a year old. I mean, they RENAMED the N mode to an OLDER naming of the same function. Like - WTF is happening over there?

djiuser_zgZSSEwjvIDd Posted at 4-23 01:49
The lack of non-communication from officials regarding the FIRMWARE of the drone is astonishing.
Its not like we are discussing ND filters or whatever third-party stuff.
Meh, guess the software developers moved on to coding firmware for the power stations, the new Avata or whatever new is in.I guess the power stations need real coding, unlike the newest and most commercial small drone there is.

Mini 4 Pro is not maintaned properly, even if its not even a year old.



This is my impression as well.

Still no any info about the clear image output from USB-C ?

New Firmware for drone did install today (V01.00.0500). Announced RC2 App 1.13.1 did NOT install, it cannot be found by the RC2. What's up there, DJI?

Date: 2024.04.23
Aircraft Firmware: v01.00.0500

There is no such firmware, there is one from 2024.04.19

SeehawerB Posted at 4-23 06:27
New Firmware for drone did install today (V01.00.0500). Announced RC2 App 1.13.1 did NOT install, it cannot be found by the RC2. What's up there, DJI?

Cause of the overheating I always update with DJI Assistant 2 on computer, fast and reliable, so I have the 1.0.500 since yesterday

djiuser_a0d9NcxOW7SL Posted at 4-16 10:43
I changed my blades to Master airscrew stealth. I now get a a P Mode icon instead of N for normal. I am getting mixed answers from the web. How do I turn off P mode and get back to Normal ?
Mini 4 pro
Thanks

Hi,

You can review the messages on pages 4 and 5 regarding the problem you are experiencing in the links below

https://forum.dji.com/forum.php? ... p;extra=&page=4
https://forum.dji.com/forum.php? ... p;extra=&page=5

I've just installed the V01.00.0500 from the RC2. No updates for the RC2 itself.

FabioV Posted at 4-24 04:59
I've just installed the V01.00.0500 from the RC2. No updates for the RC2 itself.

I just did that too and it worked well
But the DJI Fly App on RC-2 was not updated to V1.13.1

What bugs were fixed in version v01.00.0500?

1.00.0500 seems to have problems:

DJI Fly app 1.13.2 is out, let's search for new bugs

_SoP_ Posted at 4-27 22:26
1.00.0500 seems to have problems: https://youtu.be/JVAKN-yMbPI

The RC1 always did boot really slow but the RC2 used to be faster.  Just tested again and both are now super slow when booting up.  Not sure what has changed in the FW to cause the slow boot up issue.  Hopefully, DJI will recognize it is a problem and try and fix it.  

_SoP_ Posted at 4-27 22:26
1.00.0500 seems to have problems: https://youtu.be/JVAKN-yMbPI

1.00.0500 is an update for the drone that has nothing to do with the RC2 slow boot. This was introduced with the 02.02.0000 firmware for the RC2 and can be caused by something in the system software/settings. It can also be caused by changes in version 1.13.0 of the DJI Fly app that was packed with that firmware. One would then expect similar behaviour with the other remote options using the same version though.

laszlo Posted at 4-15 04:24
IDK what is going on with the new Firmware but I don't like it. I installed in Friday night with no issues. Over the weekend I flew my Mini 4 Pro a handful of times at different location. It now takes 2-3 minutes once the RC2 and the drone are turned on to go from a black screen view to a live screen. I sure hope a patch is coming soon.

Yes, now  it takes too much time to boot… they should fix it!!!

Can anyone share if they're experiencing the same issue as me? In hyperlapse mode, when I start taking photos, the first one captures fine, but on the second one, the camera stops for a few seconds, and the RC 2 display goes black and white as if losing signal momentarily, then signal restores. This only happens in hyperlapse mode. I'm using a Lexar 1066x 512GB V30 U3 A2 microSDXC card, and I've tried another one, but the problem persists. I think it occurred after the latest update.

djiuser_hT1FqgZxrmDH Posted at 4-30 01:44
Can anyone share if they're experiencing the same issue as me? In hyperlapse mode, when I start taking photos, the first one captures fine, but on the second one, the camera stops for a few seconds, and the RC 2 display goes black and white as if losing signal momentarily, then signal restores. This only happens in hyperlapse mode. I'm using a Lexar 1066x 512GB V30 U3 A2 microSDXC card, and I've tried another one, but the problem persists. I think it occurred after the latest update.

Hello, there. Sorry for the inconvenience. May we know if the issue only occurs in Hyperlapse mode?
Did you record the video? Can we have a look?

The problem arises only in hyperlapse mode, even though the device was replaced under warranty. After updating everything, it was working normally, but in the evening, when I tried to shoot in hyperlapse mode again, the problem reappeared, just like with the first device. I will take video later and upload them.

DJI Wanda Posted at 4-30 03:35
Hello, there. Sorry for the inconvenience. May we know if the issue only occurs in Hyperlapse mode?
Did you record the video? Can we have a look?

Every time I try to make a hyperlapse with the drone, regardless of using the recommended 3 SD cards, I encounter the same issue. I even attempted to use the drone's internal memory, but there was no change. All other camera functions work normally and without any issues, only hyperlapse doesn't function.

djiuser_hT1FqgZxrmDH Posted at 4-30 03:49
The problem arises only in hyperlapse mode, even though the device was replaced under warranty. After updating everything, it was working normally, but in the evening, when I tried to shoot in hyperlapse mode again, the problem reappeared, just like with the first device. I will take video later and upload them.

Thanks for your reply. We see your pictures below. Are you able to upload the video from your side?
May we know did you update or refresh the firmware of the drone and remote controller to the latest version? May we know if you replaced the device in our service center or on other platforms? Can we have the Serial Number of the device?

I refreshed both RC2 and the Aircraft with DJI Assistance 2
But the problem remained.
I'm uploading the video through Google Drive because I can't share it directly here.

https://drive.google.com/file/d/1MNseW6PHWWD-tlRygP1h4oILVT4_YHG7/view?usp=drivesdk

DJI Wanda Posted at 5-1 05:27
Thanks for your reply. We see your pictures below. Are you able to upload the video from your side?
May we know did you update or refresh the firmware of the drone and remote controller to the latest version? May we know if you replaced the device in our service center or on other platforms? Can we have the Serial Number of the device?

https://drive.google.com/file/d/1MNseW6PHWWD-tlRygP1h4oILVT4_YHG7/view

djiuser_hT1FqgZxrmDH Posted at 5-1 05:45
https://drive.google.com/file/d/1MNseW6PHWWD-tlRygP1h4oILVT4_YHG7/view

Could you please open the authority to all so that we can access the link?
Thanks.