Please select Into the mobile phone version | Continue to access the computer ver.
Automatic landing gear issue.
690 1 2017-6-16
Uploading and Loding Picture ...(0/1)
o(^-^)o
Wieg1
lvl.2

Italy
Offline

On my Inspire 1 v2 sometimes the landing gear in automatic mode lowers while flying.
It also rises and lowers to different heights from the ground in take off and landing procedure.
In manual mode it works properly. .
Any suggestions?
2017-6-16
Use props
Donnie *
Second Officer
Flight distance : 3636782 ft
United States
Offline

Check the VPS sensor , see if it is dirty or if the wires are loose from the VPS to the Aircraft . Clean the lens with soft cloth and blow out ( gently ) the mesh covered sensors .
It should ( the landing gear )  lower only once if it is the VPS sensor , if it does it more than once than look at the RC transmitter switch ( for the gear ) , see if it is faulty .

donnie


2017-6-16
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules