Hi guys,

I am very excited with my new Spark, but:

1 - Funs:
My model probably has an extra activity of the fans, this after turning it on.

2 - Temperature:
I have checked the temperature of the battery and appear always 35 degrees and after a little flight 40 !!!!

3 - Compass:
Olso I have a lot of time problem with the calibration of the compass

Can you write your experience on this points to have a real feedback?

Tks

There is an IMU calibration and a compass calibration.  The instructions say not to calibrate the compass unless you get a message to do so (good youtube videos on this).  I did have problems with the IMU calibration.  The progress bar would move all the way until just before the end and hang up...never completing.  Then, after another youtube video, I realized that during the IMU calibration the little picture of the Spark on the screen actually moves into different positions (on it's sides and ends).  Once I did that the calibration worked.

I also think the temp limits in the specs are actual outside air temp (32-104 and 0-40) and not the battery temp...but I could be wrong.

Temperature exercise, Hi, i have sow video that the other one have 23/27 degree, not 35/37 after turn it on .

What is your temperature ?

Tks