Hi folks.
Just installed the latest firmware - released yesterday:
A/C: V01.01.0010
RC: V01.01.0001
App (iOS): V4.1.3

The update proceeded smoothly and completed without incedent.
The A/C update did seem take a long time to complete, I didn't time it, but it stalled for a while at 84% and again at 85% before proceeding.
One thing I have noticed is that the connection (including image stability) between the Master and Slave RC appears to be improved.
I can view and control the camera via the Slave RC even indoors and from upstairs, which was not the case before.

Kind regards
Allan

Thanks Allen for the info. Glad it went smooth.

good news, let´s see if its improve the live feed....

Hi, the Update went smooth for me too.It took about 12 min to go from 84% to 87%, the entire Update took about 30 min.
The batteries have been updated too, after the Update the batteries were  unpaired.
Bye

Updates all went fine here also. The 84% to 87% was beginning to question the progress a bit. Left it alone and went on to do it's thing.

Will take a look at battery paring......

Edited to add that no flights yet as the wind is not kind today....

I just finished doing all three updates and all I can say is that they made things worse sooner..... It's not a heat related issue with my iPad since I was in the shade and it's only 75*f.
The video feed back even in 720 craps out, it even craps out while on the ground as I walk by the camera...CPU warning is still there

This Inspire 2 is pure junk..

ronin rs211 Posted at 2017-6-27 11:04
I just finished doing all three updates and all I can say is that they made things worse sooner..... It's not a heat related issue with my iPad since I was in the shade and it's only 75*f.
The video feed back even in 720 craps out, it even craps out while on the ground as I walk by the camera...CPU warning is still there

I can assure you my I2 works perfect. Maybe you should just send it in for repair?

I am, just got off the phone and waiting for a return label... Of course they won't let me just drive it in and have them take a look at it while I wait...

Good news. I'm going to update it tonight...

Ale Posted at 2017-6-28 01:03
Good news. I'm going to update it tonight...

Just completed a test flight with the new firmware - all good, no problems!
Regards
Allan

allanart Posted at 2017-6-28 01:49
Just completed a test flight with the new firmware - all good, no problems!
Regards
Allan

Just updated mine and it took over an hour to complete 4 sets of batteries and two cameras, two remotes.
It took ages for the video controller to upgrade, maybe because of prores?

ronin rs211 Posted at 2017-6-27 12:26
I am, just got off the phone and waiting for a return label... Of course they won't let me just drive it in and have them take a look at it while I wait...

Really sorry to hear of your issues. All I can say is that you must have a genuine problem with the machine  as I don't have any of the issues you experience even at 30C in full sun. Only problem I have is with the props which make me very nervous. I have just ordered a set of folding carbon props which bolt on. Very expensive but at least I will have some peace of mind.

SkySight Aerial Posted at 2017-7-1 02:00
Really sorry to hear of your issues. All I can say is that you must have a genuine problem with the machine  as I don't have any of the issues you experience even at 30C in full sun. Only problem I have is with the props which make me very nervous. I have just ordered a set of folding carbon props which bolt on. Very expensive but at least I will have some peace of mind.

The new app turns the video feed to my new iPad mini 4 to crap after 5 min of flight time...
No other apps on the damn iPad and I never had an issue before the latest app/firmware updates.