AmericanSisu
lvl.1
United States
Offline
|
RicardoGray Posted at 2017-6-29 05:51
I know everyone is trying to help you and you are probably getting frustrated, but there isn't much else we can offer. It seems to me that like you mention, all was ok before the crash. In my mind you do know how to connect to the WiFi , etc. That is not the issue. Your equipment must have suffered some damage that you cannot see. I know these ribbon cables are pretty fragile. I have repaired quite a few broken gimbal arms and I have never re-used the ribbon cable. I may be wrong in my thinking , but I have always had good results with the repairs. Now if the cable is in fact ok, maybe some component in the camera has failed or been damaged. Have you taken the camera completely apart to look for anything suspicious? Do you have any friends or a hobby shop that you could maybe swap out your camera to see if it functions on another aircraft?
That would explain why I don’t have visual, but why don’t I have telemetry?
I can look into replacing the camera wire harness ribbon.
When I replaced the arm, every piece of the gimbal and camera were taken apart. No damage was evident.
I’ll see if a shop will let me swap cameras on the spot to test it. |
|