Cabralkev
Second Officer
Flight distance : 1997861 ft
Canada
Offline
|
Håkan K Posted at 2017-7-18 22:13
Did you try boot up the craft with only the RC running and without the app started? Or RC running with Litchi started? To see if that make a difference?
Like I showed in the video. I first turned on the Inspire. Gimbal did the rotation as it usually does, but this time it was normal. I then turned on the RC and turned on the Inspire, no DJI Go app. The gimbal again rotated fine no issues. Now, I turn on the RC and opened up the DJI Go app, then turn on the Inspire. That's when the gimbal behaves strange. As you can see in the video, it rotates around, then stops a little to the right, goes limp and corrects itself.
I've tested this with the Litchi app. Having the Litchi app opened before turning on the Inspire shows the same symptoms. The gimbal behaves strange. However, the symptoms are far less. The gimbal will rotate around as it's suppose to, then stops a little to the right, then corrects itself. It doesn't go limp, like the DJI Go app does.
There must be something in the DJI Go app that is triggering this. I know Litchi does use most of the coding in the DJI Go app. Might explain why I can see the same symptoms appearing, but far less than DJI Go. Hopefully DJI releases an update soon. |
|