Hi, having a strange issue with my crystalsky. Sometimes my video from the Mavic RC is corrupted, as seen here.
goo.gl/photos/EmYkV9Drgvs6r2hx6

To fix the issue, I simply have to disconnect the Mavic rc cable, and reconnect it to the crystalsky. After one or two attempted reconnections, it does end up working perfectly.
I have tried several usb cables, including both usbc and micro usb (using the usbA port at the bottom). I am not using the side micro usb port (other than for charging.)

Is anyone else's crystalsky doing this? I'm on the latest firmware and have factory reset my device already.

Also, as other people have reported, my crystalsky does NOT connect via 5.8ghz wifi. Only 2.4 works for me.

thanks,
-Adam

Hi,

I have the same problem:
https://drive.google.com/file/d/0BybjimYsYL8tYldzVzZDSEZ5T00

Tried several cables (MicroUSB & USB-C) never had a correct video on the CS, always corrupted.

Mine have started doing the same thing every time i power up.
The solution i have found is to exit the Go4 app. (Aircraft still powerd on)
Enter settings and close all Go4 apps.
Then i launch the Go4 and everything works fine.

Really hope DJI comes out with a update as soon as possible, as this is unacceptable on a 470 USD product designed for this.
Would be nice with a force close option as well.

I have the same issue.  I'm thinking this is a problem.  Also, my CrystalSky gets super hot and thinking long term, this is not good either.

What CS firmware and Go4 version are you on?
My CS is: V02.02.06.05
Go4 is: v4.1.0

Hi

Exact same issue over here.  Important to mention all started AFTER upgraded to v02.02.06.05.  Before that everything worked fine (no lag in video  stream, no issues with wifi, and no issues with the maps having this chinese symbol

DJI: Howto revert back to previous firmware please?

Fixed my issues, see post crystalsky issues