Hello everyone,

I noticed that the camera under the Spark is oblique and not straight.

normal?

photo:

it's the same as mine, and mine is fine.

hallmark007 Posted at 2017-7-24 11:19
That's your barometer and it's the same as mine, and mine is fine.

So normal that it is a little oblique?

Lian82 Posted at 2017-7-24 11:23
So normal that it is a little oblique?

Well mine is at same angle, so yes I hope so.

That is in-fact a camera and is normal to not be parallel to the aircraft. As long as the image the camera sees is stable, it will work perfectly.

DJI Joe Posted at 2017-7-24 11:41
That is in-fact a camera and is normal to not be parallel to the aircraft. As long as the image the camera sees is stable, it will work perfectly.

Okay, but I would have it straight up, it's bad to see ..

but if there is a logical reason okay I do not speak anymore!

good to know

Don't touch it, that will be the adjustable focusing element for the vision system. This will have been calibrated during assembly and by changing it you will change the vision systems focal plane and possibly cause problems with the vision system.