HMArnold
First Officer
Flight distance : 24012 ft
United States
Offline
|
I'm not sure if I can help, but I have an S1000+, A2, Lightbridge, Zenmuse Z15 setup that works fine using dual Futaba 14SB controllers, one to fly and the other to control the gimbal.
The signals from the gimbal go through a "training wire" that allows for both Futabas to go into the Lightbridge ground unit, then through to the Lightbridge air unit, then an SBUS decoder board to the Zenmuse. The SBUS decoder board breaks out the various individual signals that plug into the Zenmuse controller inputs through 3 inch jumpers of 3 wires each.
If that's anything like what you're after, let me know and I'll send pictures of the connections and screenshots of the various Lightbridge Ground/Air, and Zenmuse assistant program screens.
I do know that one user posted a lengthy explanation of how to get a similar setup to mine to work through the Lightbridge with a single Futaba, without the "training cable", but I haven't tried that setup yet.
|
|