Please select Into the mobile phone version | Continue to access the computer ver.
Firmware 01.03.0900 upgrade fails
12Next >
1481 40 2017-7-30
Uploading and Loding Picture ...(0/1)
o(^-^)o
Edumalves
lvl.1
Flight distance : 184800 ft
Brazil
Offline

Hi Everyone...

My mavic was kept for 2-3 months without using. It was with firmware 01.03.0550. Yesterday I power it on and the RC controller asks for an update (01.03.0900).
Well, for the first try, I didn't see the entire procedure and how its end, just checked later and see the rc asking for a no fly zone update. I did Choose yes and the update stucked at 60%. 1h later, I restarted the rc and the mavic and realize that the DJI App asks again for an update (01.03.0900). Since that, I've tryed many times and always stucks at 74% and fails.

Can anyone help me?

Thanks a lot
2017-7-30
Use props
Edumalves
lvl.1
Flight distance : 184800 ft
Brazil
Offline

In addition...seens that batteries and RC accepted the upgrade. The mavic still dont
2017-7-30
Use props
Tombolian
Second Officer
Flight distance : 675958 ft
United States
Offline

I think the first thing you will want to try is to use the DJI Assistant 2 software, preferably from a PC rather than a mac, they seem to have the most success in stories here in the forum.  I had serious problems in the beginning (I think I started around 1.03.04 ish), had to get special help from one of the DJI moderators, and have used the Assistant software ever since without a problem.
2017-7-30
Use props
Andygol
lvl.1

Argentina
Offline

i m from argentina, and i have the same problem, i try to update with Dji Assitant 2 but i was non lucky.
2017-7-30
Use props
dronist
Captain
  • >>>
United States
Offline

Which OS are you using? Make sure your Internet connection is fast enough.
2017-7-30
Use props
Mblumster
lvl.1
Flight distance : 61900 ft
United States
Offline

I am using Android and I had multiple issues with the upgrade.  After several attempts, I deleted the original app from my phone and then downloaded the app as a fresh install.  It has worked since then.  

Good luck
2017-7-30
Use props
Lucas775
Captain
Flight distance : 13343924 ft
  • >>>
United States
Offline

Try upgrading it with DJI assistant 2 at most times the assistant 2 works better than the wireless upgrade.  

Good Luck
2017-7-30
Use props
Andygol
lvl.1

Argentina
Offline

I try several times with Dji assistant  2 but its non working. fail at 60% or 74% As described  Edumalves, its so frustrating, today im tired.
The RC is updating correctly with Dji Assitant 2
2017-7-30
Use props
DJI Diana
Administrator
Flight distance : 2408 ft

Offline

Andygol Posted at 2017-7-30 16:25
I try several times with Dji assistant  2 but its non working. fail at 60% or 74% As described  Edumalves, its so frustrating, today im tired.
The RC is updating correctly with Dji Assitant 2

What error code you've got when you failed to upgrade the drone?
2017-7-31
Use props
DJI Diana
Administrator
Flight distance : 2408 ft

Offline

Edumalves Posted at 2017-7-30 12:19
In addition...seens that batteries and RC accepted the upgrade. The mavic still dont

Have you tried to re-upgrade the drone via the DJI Assistant 2? If yes, how is it going? Please post a screenshot of the error message if you failed to upgrade it in DJI Assistant 2.
2017-7-31
Use props
MDR019
lvl.1
Flight distance : 25436 ft
Australia
Offline

Same happened to me yesterday stuck twice at 50%, a post on another forum said to simply format the SD card and sure enough after restarting the procedure it simply updated the firmware to both the Mavic and the controller
2017-7-31
Use props
Edumalves
lvl.1
Flight distance : 184800 ft
Brazil
Offline

DJI Diana Posted at 2017-7-31 01:12
Have you tried to re-upgrade the drone via the DJI Assistant 2? If yes, how is it going? Please post a screenshot of the error message if you failed to upgrade it in DJI Assistant 2.

I have tried many times via DJI Assistant 2, but without sucess. Tonight I will try again and post a screenshot here

2017-7-31
Use props
Edumalves
lvl.1
Flight distance : 184800 ft
Brazil
Offline

dronist Posted at 2017-7-30 14:30
Which OS are you using? Make sure your Internet connection is fast enough.

Win10 with fast internet and Samsung S8 with android
2017-7-31
Use props
Edumalves
lvl.1
Flight distance : 184800 ft
Brazil
Offline

MDR019 Posted at 2017-7-31 03:57
Same happened to me yesterday stuck twice at 50%, a post on another forum said to simply format the SD card and sure enough after restarting the procedure it simply updated the firmware to both the Mavic and the controller

Good idea. I Will try this tonight

Tks everyone
2017-7-31
Use props
Andygol
lvl.1

Argentina
Offline

DJI Diana Posted at 2017-7-31 01:12
Have you tried to re-upgrade the drone via the DJI Assistant 2? If yes, how is it going? Please post a screenshot of the error message if you failed to upgrade it in DJI Assistant 2.

i tried with 2 OS, one WIN10 and other WIN7 64, all with Dji Assitand 2. but i was non lucky.
i attach the screen of the error.

2017-7-31
Use props
Andygol
lvl.1

Argentina
Offline

Andygol Posted at 2017-7-31 14:33
i tried with 2 OS, one WIN10 and other WIN7 64, all with Dji Assitand 2. but i was non lucky.
i attach the screen of the error.

always stack at the 60%, i tried format the sd but, always the same, stack at 60%. im really tired, 3 days and i cant fly the mavic.

really i never fly it, because its new.
2017-7-31
Use props
Edumalves
lvl.1
Flight distance : 184800 ft
Brazil
Offline

Hi everyone...

I've tried do the upgrade via DJI Assistant 2. Here's the result:

Connect mavic via usb cable, battery 100% and SD card formatted.

First, I got this message...

https://postimg.org/image/gj13lmxpb/

Hit yes...the update begins and stucks at 21%....then mavic restarts and the update goes to 70% and stucks again

then got the update fail message
https://postimg.org/image/n1ogzcx9x/

While I try to update the error log, the screen refresh and shows

https://postimg.org/image/8winxjo8l/

and that is what happens...=/
2017-7-31
Use props
Edumalves
lvl.1
Flight distance : 184800 ft
Brazil
Offline

Last today's try...

battery 100%, SD card formated again...dji assistant 2 cache cleared..
Choose the latest firmware...01.03.0900....the update stucks at 57% and fails



My mavic's firmware is 01.03.0550...my RC 01.03.0900. Can I fly it even with this firmware mess??? Sincerelly, I almost give up with this firmware problem... I don't know what else to do =/
2017-7-31
Use props
DJI Diana
Administrator
Flight distance : 2408 ft

Offline

Andygol Posted at 2017-7-31 14:33
i tried with 2 OS, one WIN10 and other WIN7 64, all with Dji Assitand 2. but i was non lucky.
i attach the screen of the error.

Could you please provide me with your DJI account email? I'll reconfigure it, then tell you how to upgrade the drone again.
2017-8-1
Use props
DJI Diana
Administrator
Flight distance : 2408 ft

Offline

Edumalves Posted at 2017-7-31 19:01
Last today's try...

battery 100%, SD card formated again...dji assistant 2 cache cleared..

Provide me with your DJI account email, I'll reconfigure your account, then tell you how to upgrade the drone successfully.
2017-8-1
Use props
Andygol
lvl.1

Argentina
Offline

DJI Diana Posted at 2017-8-1 00:11
Provide me with your DJI account email, I'll reconfigure your account, then tell you how to upgrade the drone successfully.

Hi Diana my mail is andygol207@gmail.com.
2017-8-1
Use props
Andygol
lvl.1

Argentina
Offline

DJI Diana Posted at 2017-8-1 00:11
Could you please provide me with your DJI account email? I'll reconfigure it, then tell you how to upgrade the drone again.

Hi Diana my mail is andygol207@gmail.com.
2017-8-1
Use props
Edumalves
lvl.1
Flight distance : 184800 ft
Brazil
Offline

DJI Diana Posted at 2017-8-1 00:11
Provide me with your DJI account email, I'll reconfigure your account, then tell you how to upgrade the drone successfully.

edumalves@gmail.com

thanks Diana
2017-8-1
Use props
dronist
Captain
  • >>>
United States
Offline

Edumalves Posted at 2017-7-31 06:53
Win10 with fast internet and Samsung S8 with android

I don't use Android but did you follow the steps.
I never used the ASSIS2
Turn computer, start ASSIS2 under ADMIN credentials,
Then turn the plug the USB IN THE ac and then in the computer USB.
THEN TURN THE AC ON.
then click the icon and start the process.


2017-8-1
Use props
dronist
Captain
  • >>>
United States
Offline

Edumalves Posted at 2017-7-31 06:53
Win10 with fast internet and Samsung S8 with android

I don't use Android but did you follow the steps.
I never used the ASSIS2 to update any of my drones.

Turn computer, start ASSIS2 under ADMIN credentials,
Then turn the plug the USB IN THE ac and then in the computer USB.
THEN TURN THE AC ON.
then click the icon and start the process.


2017-8-1
Use props
Andygol
lvl.1

Argentina
Offline

DJI Diana Posted at 2017-8-1 00:11
Could you please provide me with your DJI account email? I'll reconfigure it, then tell you how to upgrade the drone again.

My mail or user is andygol207@gmail.com

It is a log fole that report

[00052805][29 00] Firmware download finish successfully.
[00052961]Done (37697448B 0x65f967a5178c677cba9524380bda70a6).

[00007973]========== Download: remo-con disconnect. boot(DB85) =======
[00008047]Master [10 02].
[00008122][29 00] Firmware download start...
[00042472][29 00] Firmware download finish successfully.
[00042546]Done (37697448B 0x65f967a5178c677cba9524380bda70a6).

2017-8-1
Use props
Drink Windex
lvl.1
Flight distance : 262487 ft
United States
Offline

When making large leaps in firmware versions you are at the Mercy of the developer who wrote the latest firmware. It is possible the 01.03.0900 wants to update some file that is not present with 0550, but was added by an update in between 0550 and 0900. And since the file is not present the installer stalls and hangs. Then times out with failure. This situation , if true in your case, is entirely the fault of the developer who was quite frankly, lazy with their code.

I recommend trying to update your firmware to a closer release to your current version. Doing this in steps will usually solve this issue.

BTW this type of problem is present among all applications/OSs/Firmware etc etc.
2017-8-1
Use props
DJI Diana
Administrator
Flight distance : 2408 ft

Offline

Andygol Posted at 2017-8-1 04:41
Hi Diana my mail is .

Copy that, Please refer to the steps below to upgrade it via the DJI Assistant 2 again.
1. Log into your DJI account.
2.Upgrade the firmware V1.3.8.10 or V1.3.8.11.
3. Once it's done, please press the "Record" button on RC and make sure it's recording, then start to upgrade firmware to the latest one, it will be working
2017-8-1
Use props
DJI Diana
Administrator
Flight distance : 2408 ft

Offline


Copy that, Please refer to the steps below to upgrade it via the DJI Assistant 2 again.
1. Log into your DJI account.
2.Upgrade the firmware V1.3.8.10 or V1.3.8.11.
3. Once it's done, please press the "Record" button on RC and make sure it's recording, then start to upgrade firmware to the latest one, it will be working
2017-8-1
Use props
Andygol
lvl.1

Argentina
Offline

DJI Diana Posted at 2017-8-1 23:30
Copy that, Please refer to the steps below to upgrade it via the DJI Assistant 2 again.
1. Log into your DJI account.
2.Upgrade the firmware V1.3.8.10 or V1.3.8.11.

Hi, Diana.

Your instructions have worked. I am very happy and grateful.
I can do my first flight on the weekend.
Thank you very much Diana.

2017-8-2
Use props
Edumalves
lvl.1
Flight distance : 184800 ft
Brazil
Offline

Hi Diana!!!

Worked for me too!!! I Don't have sufficient words to thank you!! Thank you for your attention, patience and kindness. Happy for you too, Andygol

Thanks to all friends who tried to help
2017-8-2
Use props
DJI Diana
Administrator
Flight distance : 2408 ft

Offline

Andygol Posted at 2017-8-2 15:25
Hi, Diana.

Your instructions have worked. I am very happy and grateful.

You are welcome, glad to hear that. hope you can enjoy the drone, looking forward wonderful pictures and videos from you.
2017-8-2
Use props
DJI Diana
Administrator
Flight distance : 2408 ft

Offline

Edumalves Posted at 2017-8-2 18:08
Hi Diana!!!

Worked for me too!!! I Don't have sufficient words to thank you!! Thank you for your attention, patience and kindness. Happy for you too, Andygol

Appreciate your feedback, enjoy the drone, happy flying! Should you have any further questions, please feel free to contact us at any time, we're glad to help.
2017-8-2
Use props
Giltana
lvl.1
Madagascar
Offline

Hi everyone

I have exactly the same problem that "Edumalves" :

...My mavic was kept for 2-3 months without using. It was with firmware 01.03.0550. Yesterday I power it on and the RC controller asks for an update (01.03.0900).
Well, for the first try, I didn't see the entire procedure and how its end, just checked later and see the rc asking for a no fly zone update. I did Choose yes and the update stucked at 60%. 1h later, I restarted the rc and the mavic and realize that the DJI App asks again for an update (01.03.0900). Since that, I've tryed many times and always stucks at 74% and fails.
...

I am following this post and I see that you have find the solution.

I'm sorry "Diana" but I don't understant this step :

... Copy that, Please refer to the steps below to upgrade it via the DJI Assistant 2 again.
1. Log into your DJI account.
2. Upgrade the firmware V1.3.8.10 or V1.3.8.11.
3. Once it's done, please press the "Record" button on RC and make sure it's recording, then start to upgrade firmware to the latest one, it will be working
...

For information my Email for dji account is gilles@chapoton.info

Thanks you for your help.
2017-8-3
Use props
DJI Diana
Administrator
Flight distance : 2408 ft

Offline

Giltana Posted at 2017-8-3 01:00
Hi everyone

I have exactly the same problem that "Edumalves" :

Have you tried to upgrade it via DJI Assistant 2? Here is a video for your reference, if you failed again, please tell me what error code you've got.
2017-8-3
Use props
Edumalves
lvl.1
Flight distance : 184800 ft
Brazil
Offline

Giltana Posted at 2017-8-3 01:00
Hi everyone

I have exactly the same problem that "Edumalves" :

How I did..

1 - Connect mavic via USB in Computer.
2 - Open DJI Assistant 2 and log in with your account
3 - Turn on Mavic
4 - Go to firmware, choose 1.3.0811 and hit update
5 - after update completed, hit back in DJI Assistant 2
6 - Turn on Remote Controller attached to your Phone with DJI Go and connect to mavic (without disconnect mavic to computer)
7 - hit record button (red dot upper left in Remote controller) and make sure mavic is recording.
8 - In DJI Assistant 2 choose to update the last firmware (01.03.0900) and done.
2017-8-3
Use props
Giltana
lvl.1
Madagascar
Offline

Hello Diana
Yes I use whith DJ Assistant 2. The error is "undefined 0x020106"

Hello Edumalves
Thanks you for you feedback, now I understand  the proccess. But doesn't work for me
2017-8-3
Use props
Rixxie33
lvl.3
United States
Offline

I must have been lucky- I had my Mavic for only one day- the next I got the notice to down load-
I did using the mini4 and a good strong wifi signal- Bang- down load 100%- no issues-
2017-8-3
Use props
DJI Diana
Administrator
Flight distance : 2408 ft

Offline

Giltana Posted at 2017-8-3 10:04
Hello Diana
Yes I use whith DJ Assistant 2. The error is "undefined 0x020106"

Got it, I've reconfigured your DJI account email, please refer to the steps which I mentioned before to upgrade the firmware again.
1. Log into your DJI account.
2.Upgrade the firmware V1.3.8.10 or V1.3.8.11.
3. Once it's done, please press the "Record" button on RC and make sure it's recording, then start to upgrade firmware to the latest one, it will be working.
2017-8-3
Use props
Andygol
lvl.1

Argentina
Offline

Edumalves Posted at 2017-8-2 18:08
Hi Diana!!!

Worked for me too!!! I Don't have sufficient words to thank you!! Thank you for your attention, patience and kindness. Happy for you too, Andygol

Hi, Edumalves.

Olá, como você tem sido, muito obrigado, eu estou contente de ouvir que você tem trabalhado para você.
2017-8-4
Use props
12Next >
Advanced
You need to log in before you can reply Login | Register now

Credit Rules