Hi Guys, I'm new at this and I hope someone can help me! Sorry for my bad english.

Three weeks ago I updated my Phantom 2 MC and a RC to the new versions. My phantom 2 now is on the version V3.12

I later calibrate IMU and all was OK. But when Im ready to fly and try to calibrate the compass this problem happens:

https://www.youtube.com/watch?v=JjV6XOveWJ0

I tryed outside and In a lot of different places and nothing different happend. Two weeks ago I get back tu version V3.08 because the software assistant V3.06 let me, but now I cant do anything.

Please help me.

Whats the mod value of the compass in the assistant SW?

If those are fast yellows, it says transmitter signal lost,
Did you try to rebind your RC and TX if you have one

I would try to calibrate the compass outside in an open field well away from any magnetic interference.

johnwarr@live.c Posted at 2015-3-25 08:08
I would try to calibrate the compass outside in an open field well away from any magnetic interferen ...

John,
he posted under another thread as well and that is exactly what i suggested, in his other post he indicated red and yellow flashing

http://forum.dji.com/forum.php?m ... age%3D1&lang=en

Fair enough, I just watched the video of him doing it in the bedroom (hmmm not what you are thinking)

johnwarr@live.c Posted at 2015-3-25 08:19
Fair enough, I just watched the video of him doing it in the bedroom (hmmm not what you are thinking ...

Steel springs in the mattress?

Hi guys thanks for the answer, sorry for my bad english.

I've try it outside and open fields but the same error appears, the IMU values are Ok, this was not happening to me before the V3.12 Update. When the update came out I upgraded and Notice this error but I was available then to get back to V3.08 with the Assistant 3.6, but then (my mistake) whas to give it a Try again and now I cant go back because all assistants have the V3.12 as their new version.

What else can I try?

justforjoder@gm Posted at 2015-3-26 12:51
Hi guys thanks for the answer, sorry for my bad english.

I've try it outside and open fields but th ...

Try this site, it claims to have the original 3.6 with 3.08 firmware, let us know!
http://droneslinger.com/software.html?lang=en&lang=en

Northofthe49th Posted at 2015-3-26 13:59
Try this site, it claims to have the original 3.6 with 3.08 firmware, let us know!
http://dronesli ...

Hi North,

It doesnt work, it shows you de last v3.12 update... Im trying everything and cant fix this.

Hi North,

I've tryed your program but it recognizes too the version V3.12, I read somewhere that is because de assistants download the version updates from the DJI servers.

Im done with this and I think buying a new compass is not necessary because as I told when I was going back to the V3.08 the compass would calibrate....

Hope you can think on another solution, thanks!