Cravenfan
Second Officer
Flight distance : 125256 ft
United States
Offline
|
hallmark007 Posted at 2017-8-3 03:39
You can in your app enable RTH within 20 metres, when you enable this your spark will raise to 2.5 metre or if it is above 2.5 metre it will stay at this height and RTH. If this is disabled it will just land as yours did.
I would make sure before you enable or disable this that you are aware of the area you are in and the what might occur in each situation.
Ya, I read the manual a bunch and still was confused on this topic. So, just want to make sure I get this...
If you have RTH at current altitude DISABLED within 3-20m, it will land where it is.
If you have RTH at current altitude ENABLED within 3-20m, it will land back where the Home Point was last recorded, but if that's on the other side of trees, you're hosed.
I assume the RTH button on the remote works depending on which way this is also?
So, if you are goofing around in an open field, you could enable RTH at current altitude. If you are flying a mile away, you'd want to disable it and then enter the proper RTH altitude so that you would clear any potential hurdles (trees, buildings, wires) in the Sparks path. (Next option down in the Maine Controller Settings.)
Do I have that correct? |
|