Is there a way to view the camera firmware version on the vision plus? I recently purchased one and was doing the updates but the camera update did not work as described, when I inserted the sd card with the downloaded file and turned the battery on nothing happened and when I checked the sd card there was no renamed file.  Is it possible newer shipments are coming with some of the older updates already installed?  Anyway you can find out your cameras current version?

You may connect your Phantom to the PC or Mac via the Micro-USB port and launch the Phantom Assistant to check your  camera firmware version.

Ok thanks, what should the current version be? Mine shows a higher version than what is shown on the website as the current new version.

I just finished the firmware upgrade on the camera on my vision and experienced the same problem. You need to be sure that you have decompressed the file from the download before copying it to the sd card. If you have a successful update the camera indicator light will flash yellow for a few seconds then go green. Check your results in the dji app in the"about" section. The new version should be 1.1.9. This worked for me.

The Vision is 1.19
The Vision + is 1.25g
But some people with the latest V+ already have 1.28 firmware, or so it seems.
Odd that DJI build them with a newer firmware than available to download on this site.

johnwarr@live.c Posted at 2014-10-17 03:15
The Vision is 1.19
The Vision + is 1.25g
But some people with the latest V+ already have 1.28 firmwa ...

Maybe DJI could respond to this one? Maybe one is causing all the GPS issues and one is not?

The latest version is 1.25g

The current latest version for VISION PLUS FC200 is v1.25g. Not sure how some customers get the 1.28 firmware, DJI has not released this version.

johnwarr@live.c Posted at 2014-10-17 03:15
The Vision is 1.19
The Vision + is 1.25g
But some people with the latest V+ already have 1.28 firmwa ...

Bougth my p2v+last week and the cam firmw is 1.28..... ???....

DJI -Lisa.zhu Posted at 2014-10-18 14:06
The current latest version for VISION PLUS FC200 is v1.25g. Not sure how some customers get the 1.28 ...

Then you should confirm with your manufacturer, because my camera is 1.2.8g, on the app of android phone it's wath is indicating.

Likewise here with my replacement camera/gimbal 1.2.8g

lefthand not talking to righthand DJI?

After cofirming with DJI R&D, the latest veision for camera is V1.2.8g.
Thanks for your feedback.