Is the gimbal yaw tuning option not anymore in the new dji go 4.17 update?

It was not working anyway , but i am
Just curious if i am the only one who hasnt got it

Its chasing the Smart RTH toggle somewhere in China.

Hmm really suxx because when i reset my Gimbal position my yaw is not on 0. Have a -1.9° of yaw and can not fix it
Some ideas?!

Already tried to calibrate...

issue85 Posted at 2017-8-23 23:43
Hmm really suxx because when i reset my Gimbal position my yaw is not on 0. Have a -1.9° of yaw and can not fix it
Some ideas?!

"Already tried to calibrate..."

There is one other method I've seen mentioned, and that is to calibrate the gimbal with the aircraft tilted back sitting on the rear arms. I've not really had a need to try this myself, but this has been suggested as a potential cure for the yaw not sitting at zero.

issue85 Posted at 2017-8-23 23:43
Hmm really suxx because when i reset my Gimbal position my yaw is not on 0. Have a -1.9° of yaw and can not fix it
Some ideas?!

Please refer the below picture and calibrate the gimbal again.

The gimbal yaw tuning requires both the APP and aircraft firmware have been updated to the latest version.

DJI Susan Posted at 2017-8-27 20:07
The gimbal yaw tuning requires both the APP and aircraft firmware have been updated to the latest version.

Sure? I have the latest firmware and the latest DJI GO4 app (4.1.7)

With the 4.1.6 I adjusted the gimbal perfectly, with the 4.1.7 i don't have the setting option in the menu.

Has anyone been able to calibrate in this position?

I put the aircraft in this position but the gimbal was crazy, moving to all sides and doing strange sounds. Then, I aborted.

MaxP4 Posted at 2017-8-29 00:32
Sure? I have the latest firmware and the latest DJI GO4 app (4.1.7)

With the 4.1.6 I adjusted the gimbal perfectly, with the 4.1.7 i don't have the setting option in the menu.

Best guess from here is, that in order to get space and CPU power to control when and where we are allowed to fly (NFZ stuff etc.) we have to offer some useful features and stability ...

MaxP4 Posted at 2017-8-29 00:32
Sure? I have the latest firmware and the latest DJI GO4 app (4.1.7)

With the 4.1.6 I adjusted the gimbal perfectly, with the 4.1.7 i don't have the setting option in the menu.

The latest version reserve the Gimbal Yaw Tuning and remove the scale 0. Please refer the below pictures and confirm.

This is my situation... latest firmware, latest app! Why?I had the yaw tuning with GO4 4.1.6 and I have not seen it anymore after updating to 4.1.7 (I also connected the DJI Goggles in the same time).
I tried to delete and reinstall the app, I tried to reload the firmware on the PH4 and reset the factory settings.

I Have the same issue. The previous ver 4.1.6 had the yaw ajust but ver 4.1.7 and higher haven't

Yes this was my first question how i started this post.then somehow this post strayed of the subject.
But dji? Can you confirm why yaw tuning is taken out the new update? Or did the update go wrong?

fans61699a75 Posted at 2017-9-4 08:49
Yes this was my first question how i started this post.then somehow this post strayed of the subject.
But dji? Can you confirm why yaw tuning is taken out the new update? Or did the update go wrong?

No answer... Who the guys have the same problem? Please report!!!

Any news about this problem?

...no news?

I cant also see this options anymore, App (IOS), AC and RC are up to date!!

issue85 Posted at 2017-8-23 23:43
Hmm really suxx because when i reset my Gimbal position my yaw is not on 0. Have a -1.9° of yaw and can not fix it
Some ideas?!

Please try a gimbal calibration to see if this helps. Also, you need to make sure that your firmware is up to date.

Huuh ?

"you need to make sure that your firmware is up to date."

I have the same issue.

Yup, I posted in forums that APP version 4.17 we lost the YAW tuning and it hasn't comeback in the subsequent latter released APP. On IOS nor Android. YAW Tuning is gone. I'm not sure what software DJISusan is running, but clearly what we get in the USA off the Play Store for Android or APP Store for IOS no longer contains any YAW adjustment, what so ever.

Something new for me...

With a fresh install of DJI Go4 i have "Recenter Gimbal" but if I install the 32 channels hack the setting disappears!
Tried twice with the same result.

Ready to return the MAVIC... lack of support and being able to fly the unit.  MAC/SAFARI.. II.1. FLY other models... no problem!