Can you have on remote controller
to 2 air unite on  2 different drones

people do not care and answer or do not know

Yes you can. Not to fly at the same time though.

fans9660f229 Posted at 2017-9-4 03:00
Yes you can. Not to fly at the same time though.

ok thank you for your reply
that is, I can register 2 air units and they work depending on which one is on
and I do not need to separately register them every time

ckk.post Posted at 2017-9-8 09:28
ok thank you for your reply
that is, I can register 2 air units and they work depending on which one is on
and I do not need to separately register them every time

What two aircrafts are you referring to? What type of controller are you using? If you are asking if a remote can be used on two separate aircraft, you should be able to do that.

DJI-Mark Posted at 2017-9-26 07:57
What two aircrafts are you referring to? What type of controller are you using? If you are asking if a remote can be used on two separate aircraft, you should be able to do that.

If you are asking if a remote can be used on two separate aircraft, you should be able to do that.

Thank you for your answer, that's exactly what I'm asking for
but do  you need to press the link button each time  on the air unit
Or is there another smart way
I have lightbridge 2
and want to use 2 air units on two different drones with on remote

ckk.post Posted at 2017-9-26 08:42
If you are asking if a remote can be used on two separate aircraft, you should be able to do that.

Thank you for your answer, that's exactly what I'm asking for

You have to link with the aircraft you are going to be using. Also, keep in mind that you need to make sure that the remote is compatible with the aircraft.

DJI-Mark Posted at 2017-9-26 08:59
You have to link with the aircraft you are going to be using. Also, keep in mind that you need to make sure that the remote is compatible with the aircraft.

remote is compatible with the aircraft.

I do not understand what you mean here ?
I use the same remote but 2 different air uint

ckk.post Posted at 2017-9-26 09:50
remote is compatible with the aircraft.

I do not understand what you mean here ?

What remote do you use and for what two aircrafts?

DJI-Mark Posted at 2017-9-26 11:13
What remote do you use and for what two aircrafts?

What remote


I thought it was obvious I'm writing lightbridge 2 ???

one drone is a x8   and the other one is a quadcopter

ckk.post Posted at 2017-9-26 11:36
What remote

The Lightbridge 2 is not compatible with every aircraft out there. Here is a list on what types of products are most compatible with the Lightbridge 2:


DJI Gimbal System        Z15-GH4, Z15-5D III, Z15-A7, Z15-BMPCC
Flight Controller        A3, A2, N3, WooKong-M
Aerial Systems        S1000+, S1000, S900, S800 EVO, F550, F450

You can see that information here: http://www.dji.com/lightbridge-2/info#specs

DJI-Mark Posted at 2017-9-26 11:43
The Lightbridge 2 is not compatible with every aircraft out there. Here is a list on what types of products are most compatible with the Lightbridge 2:

The Lightbridge 2 is not compatible with every aircraft

You asked about which remote
and my question where if i  could use on  remote with 2 air unites
and if there was an easier way and link it on
everything else I know all about
I use A3Pro and N3  
I have used futaba before everything is easy with regard to and link

I don’t like linking every time. Therefore I have two LB2. Now both have the CrystalSky mount.

That is the second LB2.
(The Vis-camera is Connex Prosight)
Best regards,
Wilhelm

WiSi-Testpilot Posted at 2017-9-26 14:14
I don’t like linking every time. Therefore I have two LB2. Now both have the CrystalSky mount.

I don’t like linking every time

No, you're right, but I will not keep  on buying and buying
if it can be avoided