Please select Into the mobile phone version | Continue to access the computer ver.
P4p plus controller and windows 10 x64
609 4 2017-9-8
Uploading and Loding Picture ...(0/1)
o(^-^)o
SM-17
First Officer
Flight distance : 179288 ft
Netherlands
Offline

Hi all

Can someone please check if the plus controller with V01.02.01.00 firmware connects to assistant 2 in windows 10 (64bit) please?

Drone connects fine but not the controller
No missing/crashed/unknown drivers
Windows sees the GL300e controller and i can read internal and sd card storage
ADB recognises the controller

Controller reset to default

Assistant 2 V1.1.2-2 (tried older versions too)

Thanks
2017-9-8
Use props
DJI Susan
Administrator

Offline

How about changing to another cable or PC? I would recommend the PC with windows 7 system. 
2017-9-8
Use props
DentonPilot
lvl.3
Flight distance : 1009898 ft
United States
Offline

No problems on Win 10 x64 on my end, RC's and Phantoms seen in DJI Assistant (have 3). Spark also has worked fine on same setup. Are you running Insider builds of Win10 by chance?
2017-9-8
Use props
SM-17
First Officer
Flight distance : 179288 ft
Malta
Offline

@DentonPilot

Did you try the p4p PLUS Controller?

Thanks
2017-9-9
Use props
KEDDK
Captain
Flight distance : 1133038 ft
Denmark
Offline

It does not work, Assistant 2 can only be used with the AC not the GL300E RC.
In some other thread the other day it soundedlike one could do a RC reset from Assistant 2, not sure it will do. See from post#3 here
2017-9-10
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules