Hello!
I have a problem with dji inspire 1!
I have totally new dji inspire 1 for a 2 years, its been in the box for thoose 2 years! But today finally i wanted to fly but before that i wanted to update drone to new firmware so i downloaded new firmware from official dji website. Formated my SD cart (fat32) and placed there .bin file (WM610_FW_V01.08.01.00) but my old firmware is: info from log file
========== 2015.10.14 15:59:53 =====================
Packet: WM610_FW_V01.04.00.10.bin
Upgrading ...
Result: Success.


since that day inspire was in the box!

So i placed my sd card in inspire, its upgrading al least for 10min and start to make noise DDDDDDDDDDDDDD and yellow light at the back. I`ve been trying other firmware versions and still the same.

when im placing in RC its not even updating!

and last problem:
I cant connect to dji go app with remote control. i tried with:
Iphone 7Plus - shows HOW TO CONNECT
Iphone 6Plus - shows HOW TO CONNECT
Ipad Pro -  shows HOW TO CONNECT
LG V20 - Shows Camera but nothing happens.

Can somebody help with that?
Thanks

I can not connect either

What is the frequency of DDDDDDDDDDDDDD? DDDD-DDDD? D-DD? Does it come from gimbal or main controller?
Can your RC link to the aircraft?

virgle Posted at 2017-9-14 06:46
I can not connect either

Please try to reset RC: press the C1+C2+Shutter button, and turn off and turn on the RC at the same time.
How long has the RC been kept without any using?

DJI Mindy Posted at 2017-9-14 23:28
What is the frequency of DDDDDDDDDDDDDD? DDDD-DDDD? D-DD? Does it come from gimbal or main controller?
Can your RC link to the aircraft?

Sorry for late reaply, i was away for some time.

The frequency is:  DDDDDDDDDDDDDD and i cant connect controller to inspire 1.
I will try this today.

Can you post the entire log here.   Are you trying to load version 1.11 ? On the AC ?   KEEP IN MIND THE AC AND RC USE DIFFERENT FW, THEY ARE NOT THE SAME .
Please  read  my tips page , it may help .  
Keep in mind the RC is updated via the Go app and internet connection  and if Past version 1.3 you DO NOT use a Thumb drive to update it .  


DO NOT UPDATE THE RC TRANMITTER TILL YOU GET THE AC UPDATED !!

Tips: Loading NEW firmware to RC and AC- Insp. 1 Phantom ADV & PRO


donnie

Beitynsh Posted at 2017-10-23 01:56
Sorry for late reaply, i was away for some time.

The frequency is:  DDDDDDDDDDDDDD and i cant connect controller to inspire 1.

How is going in the end?
I'm so sorry for the late response since I just come back from holiday.
Please refer to Donnie's suggestion, if the RC firmware is lower than V1.3.0, please update to V1.3.0 with Thumb Drive firstly.

This is my log file, still i cant update, all the time failed!

Result: Success.

========== 2015.10.14 15:59:53 =====================
Packet: WM610_FW_V01.04.00.10.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:05 remo-con disconnect======
Packet: WM610_FW_V01.04.00.10.bin
Upgrading ...
Result: Success.

========== 2015.10.14 16:43:19 =====================
Packet: WM610_FW_V01.04.00.10.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2015.10.14 18:20:05 =====================
Packet: WM610_FW_V01.04.00.10.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2015.10.19 16:05:40 =====================
Packet: WM610_FW_V01.04.00.10.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2015.10.19 16:24:55 =====================
Packet: WM610_FW_V01.04.00.10.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2015.10.26 15:36:38 =====================
Packet: WM610_FW_V01.04.00.10.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FW_V01.11.01.50.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FW_V01.11.01.50.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FW_V01.11.01.50.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FW_V01.11.01.50.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FW_V01.11.01.50.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FW_V01.08.01.00.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FW_V01.08.01.00.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:08 remo-con disconnect======
Packet: WM610_FW_V01.03.00.00.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:07 remo-con disconnect======
Packet: WM610_FW_V01.03.00.00.bin

========== 2014.01.01 00:00:07 remo-con disconnect======
Packet: WM610_FW_V01.03.00.00.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FW_V01.04.00.10.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:07 remo-con disconnect======
Packet: WM610_FW_V01.05.00.30.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:07 remo-con disconnect======
Packet: WM610_FW_V01.05.00.30.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FW_V01.05.00.30.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:07 remo-con disconnect======
Packet: WM610_FW_V01.08.01.00.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FW_V01.08.01.00.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:07 remo-con disconnect======
Packet: WM610_FW_V01.08.01.00.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FW_V01.08.01.00.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:07 remo-con disconnect======
Packet: WM610_FW_V01.08.01.00.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FW_V01.11.01.50.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:07 remo-con disconnect======
Packet: WM610_FW_V01.11.01.50.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FW_V01.03.00.00.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:07 remo-con disconnect======
Packet: WM610_FW_V01.03.00.00.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:52 remo-con disconnect======
Packet: WM610_FW_V01.02.01.06.bin
Result: Abort.
The current firmware does not support downgrade. Use a different version of firmware to downgrade the target version.

========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FW_V01.03.00.00.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FW_V01.04.00.10.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:07 remo-con disconnect======
Packet: WM610_FW_V01.04.00.10.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FW_V01.08.01.00.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:07 remo-con disconnect======
Packet: WM610_FW_V01.08.01.00.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:07 remo-con disconnect======
Packet: WM610_FW_V01.08.01.00.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:07 remo-con disconnect======
Packet: WM610_FW_V01.08.01.00.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FW_V01.11.01.50.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

Tried today from (WM610_FW_V01.04.00.10.bin Result: Success.) original that was before to upgrade (v.1.5.0.30) that was next one
he started to do update but even after 10sec DDDDDDDDDDDDDDDDDDDDDDDD.

I been trying today i guess all!

I`been using all this devices today to connect in DJI GO APP TO remote control:
i tried with:

Iphone 7Plus - shows HOW TO CONNECT
Iphone 6Plus - shows HOW TO CONNECT
Ipad Pro -  shows HOW TO CONNECT
LG V20 - Shows Camera but nothing happens.

Been trying link RC TO DRONE, but again nothing, drone flashing yellow light and RC control red mixed with  green - no chance
Been tryng to upgrade and downgrade firmware for RC and DRONE,  FAILED!
RC DOSNT EVEN START UPGRADE, shows STILL RED LIGHT!

LAST CHANCE IS TO CALL OFFICIAL DJI LOCAL SHOP, ask them to fix it, if they can!

DRONE is TOTALLY NEW. but been 1 one year in box.