info.amriphoto
lvl.2
Austria
Offline
|
Hi people,
I´m new to this forum so bare with me if I make a mistake. I´ve used the search but didn´t find any info on my question. I´m having only one tablet that is OK to use for the inspire transmitters which is a Nexus7. Unfortunately my iPad mini and iPad retina both don´t seem to be amont the tablets that work. And also my iPhones are too old.
In the video DJI Pilot App Tutorial "Dual Operator", Sam and Niko are using just one tablet, and it seems to work. But somehow I can´t get it to work.
Here´s what I do:
- set up the master
- turn on the inspire
- turn on the slave with the plugged in Nexus7
- Press the RC-Settings button in the app
- choose Slave
- searching for Master and select the master
- master beeps
- master LED is green
- slave LED is cyan
I do see the livewiew of the camera, but still I have no control over the camera.
If I move the yaw stick of the master left and right, I see a small movement of the camera left and right, but not much.
If I press "Request permission" and gimbal control, I wait a while and then I get the info "operation timeout". So my guess would be that I would have to add a second Tablet to the master to be able to Accept permission. But why does the Tutorial "Dual Operator" in the DJI Pilot App work with only one tablet. I don´t really want to use two tablets when travelling.
OK, that´s my story for now. Any help would be greatly appreciated.
Thanks,
Wolfgang
|
|