Chiconez1987 Posted at 2017-10-23 16:12
Since this update, I have a bug with image transmission. During flying I had full reception HD in the top screen. But the message on top always switched into "no signal" "ready to go" "no signal" "ready to go". I have reinstalled the app. Same bug.  I cannot change the image transmission mode to smoot mode. It always come back to regular mode. Since this update, I cannot use mu mavic pro.

You'll find help with that on the Mavic forum.If you're shooting at 2k or 4k, you're going to get 720p transmission, 1080p or 720p you'll have the option to get 1080p transmission to your device. But this has nothing to do with the Spark, or a firmware update for it.

hallmark007 Posted at 2017-10-9 06:04
To make a new thread you need 10 points, you have 9 so your almost there, just click on blue button marked new thread,  select topic I.E. Discussion beside that your header type your question and click the button marked New Thread.
You should get help then.

"To make a new thread you need 10 points".....

Ha.....good to know....I was wondering why my initial post....well....didn't post...

Thx...

Todd in Chicago

Sorry new versions 1.04. I have the Mavic Pro

Edd_88 Posted at 2017-10-20 08:13
The release note mentioned DJI Go 4.1.5.3 and not mention about Dynamic Home Point.
The version we are using is 4.1.10. In Play Store, the what's new mention the new function of Dynamic Home Point but need AC firmware 1.00.07 to work with.
I am now using 4.1.10 and 1.00.06. There is no Dynamic Home Point option. Do I actually need to flying in gesture or active track then have DHP option?

Yes, the new Dynamic Home Point will be released in the coming firmware release, it is not available now. When it is available, the manual will have a description for it. Please wait for the update. Thank you very much.

Chiconez1987 Posted at 2017-10-23 17:51
Sorry new versions 1.04. I have the Mavic Pro

Please try to relink the drone and RC, then try to fly in another place, make sure that the antennas are pointing the drone with a correct position, or refresh the firmware. If the issue persists, make sure if there is any impact damage on the drone, please provide me with a short video which includes the no signal switching and the interface of About at General setting. BTW, I recommend posting your issue on the Mavic column instead of Spark's.

No, and is not going to be released until 2018!

Can I downgrade my drone version until a new update? Does there have a way to do it?

DJI GO 4 just got updated to v4.1.14 on iOS. It mentions .0700 firmware for Spark, so I assume it has been released (stuck at work so can't check for aircraft updates )

Kirbz252 Posted at 2017-10-24 19:44
DJI GO 4 just got updated to v4.1.14 on iOS. It mentions .0700 firmware for Spark, so I assume it has been released (stuck at work so can't check for aircraft updates )

Why do you assume that? Previous version also mentioned .0700 firmware BTW...

quikee Posted at 2017-10-24 19:51
Why do you assume that? Previous version also mentioned .0700 firmware BTW...

Correct, although this app update has a full changelog for Spark, Inspire etc. My assumption may be wrong. I guess we will find out shortly when someone checks for firmware.

Chiconez1987 Posted at 2017-10-24 11:59
Can I downgrade my drone version until a new update? Does there have a way to do it?

Sorry, we don't suggest downgrade the firmware, but if you have to do, you can try to connect the drone to DJI Assistant 2, and see if there is any other version you can refresh.

the firmware is not available yet cause they are busy adding 25p options for their beloved european customers

DJI Thor Posted at 2017-10-25 00:01
Sorry, we don't suggest downgrade the firmware, but if you have to do, you can try to connect the drone to DJI Assistant 2, and see if there is any other version you can refresh.

Thank you. I will wait for a solution from DJI. I really don't think my drone is broken.  This this a problem of software.

This is from appstore. You can see the notes for AC firmware.

Lol it is like dji app makers is a diferent company from dji drone maker....This is ridiculus

If you dont  release the firmware, whats the point of updating the app ?

It is out now.

heliman Posted at 2017-10-31 01:21
It is out now.

I just checked DJI assistant 2 and it says that 0600 is the latest firmware.
I guess Australians will get it soon though

I've just tried to update my spark in the UK and is still currently showing .0600 as the latest firmware too.

TangoOscarNovem Posted at 2017-10-31 01:51
I just checked DJI assistant 2 and it says that 0600 is the latest firmware.
I guess Australians will get it soon though

Same just checked here in So Cal, and it still shows 0600.

dji deleted a report on a new  firmware ,also on facebook.

I only knew about it because i saw DJI post this on twitter;

What happened to Kloo Gee’s thread on the firmware upgrade .0700?  Did he pull his own thread or did DJI?

TangoOscarNovem Posted at 2017-10-31 02:33
What happened to Kloo Gee’s thread on the firmware upgrade .0700?  Did he pull his own thread or did DJI?

It appears to have disappeared

FYI , DJI send this morning a Twweet that new Firmware 0100.0700 was release
https://dl.djicdn.com/downloads/ ... elease_Notes_EN.pdf

and than it was immediately withdrawn.. and Tweet deleted.

.0700 can be found on github

It’s Halloween

I made a post and got a "Kong error"... WTF....

TangoOscarNovem Posted at 2017-10-31 02:33
What happened to Kloo Gee’s thread on the firmware upgrade .0700?  Did he pull his own thread or did DJI?

I was thinking the same! All of a sudden the thread doesn’t appear anymore in the overview of topics. I highly suspect that DJI brutally wants to suppress any proof that the firmware .0700 ever found its way into “freedom”. Maybe for legal reasons because it is still buggy? This approach reminds me of an Orwellian “ministry of truth”
BTW: we are referring to this thread, which mysteriously can be accessed directly https://forum.dji.com/thread-117965-1-1.html

DJI, should we go back to .600????

DJI, should we go back to .600???? It is possible with the assistent.

TangoOscarNovem Posted at 2017-10-31 02:33
What happened to Kloo Gee’s thread on the firmware upgrade .0700?  Did he pull his own thread or did DJI?

https://forum.dji.com/forum.php? ... p;page=1#pid1016624

Bluedot Posted at 2017-10-31 03:22
I was thinking the same! All of a sudden the thread doesn’t appear anymore in the overview of topics. I highly suspect that DJI brutally wants to suppress any proof that the firmware .0700 ever found its way into “freedom”. Maybe for legal reasons because it is still buggy? This approach reminds me of an Orwellian “ministry of truth”
BTW: we are referring to this thread, which mysteriously can be accessed directly https://forum.dji.com/thread-117965-1-1.html

.700 Fw for spark

djiuser_xLE6O03 Posted at 2017-10-31 03:29
.700 Fw for spark

Don’t get me wrong, I am thankful for the hint, but i’d rather wait for an error-free .0701 if DJI could come up with an explanation, what just happened in the last 90 minutes.

I guess there was a bug since DJI pulled it back. I am also waiting for the official release.
A explanation from DJI would be nice.

I have read other place in the forum about this, but is this information contrasted with DJI?? So far there seems to be no official information about the new FW release.

.0701 firmware release note is released but the firmware is not available yet

droneburger Posted at 2017-10-31 03:28
https://forum.dji.com/forum.php?mod=viewthread&tid=117965&page=1#pid1016624

I did not pull it!  It appears that DJI hid it from the forum!


They deleted a post of mine on their Spark FB page as well.

I have it. And I have tried it.
It performs well, 46 pictures for each sphere, but I have trouble stitching in the go app.
Only 1 of 7 does not fail to download the pictures from the spark.
It shows a nice sphere, but it won’t export it via cellular, and the copy saved to the iPhone library looks like a flat panorama.
I also try with dji media maker, but it has been stuck for a very long now.
Maybe that’s the problem that made it vaporise. (Lack of facts opens up for speculation).
I will probably brag later about if I manage to assemble a sphere on my mac.

@heliman: Same experience here. Took the 46 pictures to ICE with a perfect result.Flight behavior as bevor but need to update the batteries.