Hi yesterday I did a little flight with the BETA 600, the thing you notice right away and the 4k recording is all ok no longer hangs, while as far as the flight is concerned, it feels as if the little engines fail to make the movements and when the flying drone always moves the drone moves.

jdegbert Posted at 2017-11-9 08:47
I would really love to get added to this Beta. I haven't been able to fly for awhile. Can anyone add me, please?

Hi, please leave us with your DJI email account so we could help to push the beta, thanks.

Hi, accounts provided above will be able to access the beta soon. Please wait for a while and update it via DJI Assistant 2. Thank you.

fans29ff2d1d Posted at 2017-11-9 23:04
Hi yesterday I did a little flight with the BETA 600, the thing you notice right away and the 4k recording is all ok no longer hangs, while as far as the flight is concerned, it feels as if the little engines fail to make the movements and when the flying drone always moves the drone moves.

Hi, I don't quite understand your situation. Is it that the flight stability still a problem for you? Could you please upload a video so we can understand it better?

hi i want to test beta plss my email tommy@silaban.net

Good Morning. Can I please test beta firmware 02.00.0600 for Phantom 4.
My DJI account is: info@tecnodrones.es
Thank you, greetings from Spain.

TONI GRIFF Posted at 2017-11-10 02:46
Good Morning. Can I please test beta firmware 02.00.0600 for Phantom 4.
My DJI account is:
Thank you, greetings from Spain.

I want the same,  i need the beta firmware, .

My dji account is: f.minana@hotmail.com

Greetings from Spain.

surely as soon as I can get you a video

I already tested BETA 0600 and 4k 30fps very stable. Have not test flight yet due bad weather heavy raining.

fans29ff2d1d Posted at 2017-11-9 23:04
Hi yesterday I did a little flight with the BETA 600, the thing you notice right away and the 4k recording is all ok no longer hangs, while as far as the flight is concerned, it feels as if the little engines fail to make the movements and when the flying drone always moves the drone moves.

Strange description, but if you mean that the drone moves without your command from RC, I think you should do IMU calibration. There's a video tutorial from DJI how to do it, if you need

Hello Diana

Please send beta 02.00.0600

johncarle@bex.net

Thanks

DJI Diana Posted at 2017-10-29 20:34
Please provide us with your DJI Account email, we'll add it to your account.

Grateful if I could test the beta software too.

ssw@prime-bits.com

So, whats the major highlights with the new beta you are testing? New features, or just bugfixes?

DJI Thor Posted at 2017-11-10 00:42
Hi, I don't quite understand your situation. Is it that the flight stability still a problem for you? Could you please upload a video so we can understand it better?

as soon as I can do a video because it was a little test

Vendex Posted at 2017-11-11 04:06
Strange description, but if you mean that the drone moves without your command from RC, I think you should do IMU calibration. There's a video tutorial from DJI how to do it, if you need

ok thanks to the already calibrated. I'll try another

fans29ff2d1d Posted at 2017-11-11 23:25
ok thanks to the already calibrated. I'll try another

Hello Diana

Please send beta 02.00.0600

tfjsteyn@icloud.com

Thanks

Can you please add me to the Beta thank you worker125@gmail.com

Anyone have issues refreshing the Beta 600?  I can download the fw and after the 100% download, the DJI Asst 2 errors with a error log which i can't seem to read it.  I guess i don't have the program to read the error log.  Using Win10 Pro.  Any help would be appreciated.

AlphaXrayEcho_1 Posted at 2017-11-12 08:12
Anyone have issues refreshing the Beta 600?  I can download the fw and after the 100% download, the DJI Asst 2 errors with a error log which i can't seem to read it.  I guess i don't have the program to read the error log.  Using Win10 Pro.  Any help would be appreciated.

Update on the refresh issue.  Installed Assistant 2 on another computer.  Works fine now, not sure what is wrong with the gaming rig, newly rebuilt.

AlphaXrayEcho_1 Posted at 2017-11-12 10:58
Update on the refresh issue.  Installed Assistant 2 on another computer.  Works fine now, not sure what is wrong with the gaming rig, newly rebuilt.

Nice that you have completed the refresh. About the problem could be anything, from need of reinstall (DJI Assistant 2 latest version) to some filtering programs like software firewalls or anti-virus products ...

Hi today I tested my Phantom 4 with the BETA 600 I have to say that the flight has gone all ok the 4k video at 30fps all ok i think i've solved the problem except a particular I put into sport mode after a while it got locked up and made the maneuver return home.

The above messages have been received, I'll forward to the designated team to add you in. Any feedback will be appreciated. Thanks for your time.

jdegbert Posted at 2017-11-9 08:47
I would really love to get added to this Beta. I haven't been able to fly for awhile. Can anyone add me, please?

Hi, please kindly note that the beta is only for solving the gimbal issue. If you have other problems, please let me know. BTW, according to your request, the beta is available to your account now. Please consider if you have the same case with the gimbal then decide to upgrade or not.

AlphaXrayEcho_1 Posted at 2017-11-12 10:58
Update on the refresh issue.  Installed Assistant 2 on another computer.  Works fine now, not sure what is wrong with the gaming rig, newly rebuilt.

Yes!  I am.  Glad to learn that it isn't just me.  DJI Assistant no longer can flash firmware.  Downloads and then fails.  I think this started with the release of Windows 10 version 1709 which just came to me about a week ago.   I am using DJI go app to upgrade, refresh or downgrade firmware as needed.  No problems with it.

--Jim

Jim Watkins Posted at 2017-11-14 07:25
Yes!  I am.  Glad to learn that it isn't just me.  DJI Assistant no longer can flash firmware.  Downloads and then fails.  I think this started with the release of Windows 10 version 1709 which just came to me about a week ago.   I am using DJI go app to upgrade, refresh or downgrade firmware as needed.  No problems with it.

--Jim

From today there is a new version of DJI Assistant 2 v.1.1.8 available for download and you can give it a try

Vendex Posted at 2017-11-14 09:42
From today there is a new version of DJI Assistant 2 v.1.1.8 available for download and you can give it a try

Do you have a direct link? Can't find it..

Håkan K Posted at 2017-11-14 10:15
Do you have a direct link? Can't find it..

Here it is: https://dl.djicdn.com/downloads/ ... sistant+2+1.1.8.exe

Jim Watkins Posted at 2017-11-14 07:25
Yes!  I am.  Glad to learn that it isn't just me.  DJI Assistant no longer can flash firmware.  Downloads and then fails.  I think this started with the release of Windows 10 version 1709 which just came to me about a week ago.   I am using DJI go app to upgrade, refresh or downgrade firmware as needed.  No problems with it.

--Jim

Others are definitely experiencing this, and I did wonder if it was due to the new "creator" update. Looks like something was Definitely created by it... :-(  There's another thread on this specific issue:
https://forum.dji.com/forum.php? ... p;page=1#pid1034042

DJI Susan is seeking a copy of the update log. Otherwise, let's try v1.1.8 and see if that's any better.

I just installed the new version of DJI Assistant and it also is unable to load firmware.  I continue to think this is as a result of W10 Version 1709 update.  As I said, I am able to work around this problem using the DJI Go app to flash the firmware.

--Jim

Jim Watkins Posted at 2017-11-14 13:14
I just installed the new version of DJI Assistant and it also is unable to load firmware.  I continue to think this is as a result of W10 Version 1709 update.  As I said, I am able to work around this problem using the DJI Go app to flash the firmware.

--Jim

Jim, drop a copy of your update.log to DJI Susan as per the link above. You'll be able to do that before I can, by the sounds of it.

Oh, and I agree that it's likely to be the latest Win 10 update.

Punchbuggy Posted at 2017-11-14 13:20
Jim, drop a copy of your update.log to DJI Susan as per the link above. You'll be able to do that before I can, by the sounds of it.

Oh, and I agree that it's likely to be the latest Win 10 update.

How do I get the update log?

Jim Watkins Posted at 2017-11-14 13:54
How do I get the update log?

Jim, Go to the link in #148 above and read DJI Susan's #5 post on that thread.

DJI Thor Posted at 2017-11-14 01:47
Hi, please kindly note that the beta is only for solving the gimbal issue. If you have other problems, please let me know. BTW, according to your request, the beta is available to your account now. Please consider if you have the same case with the gimbal then decide to upgrade or not.

Hi, I have connected my P4 to my computer, and I do not see the BETA firmware update in the DJI Assistant 2 App. I have the newest version of the DJI Assistant v1.1.8, released 11/14/17. I have also tried logging out of my account on the DJI Assistant app, then logging back in, and also using the refresh button from the firmware screen. Only V02.00.0106 shows as an option. Do you have any suggestions?

jdegbert Posted at 2017-11-14 18:41
Hi, I have connected my P4 to my computer, and I do not see the BETA firmware update in the DJI Assistant 2 App. I have the newest version of the DJI Assistant v1.1.8, released 11/14/17. I have also tried logging out of my account on the DJI Assistant app, then logging back in, and also using the refresh button from the firmware screen. Only V02.00.0106 shows as an option. Do you have any suggestions?

Did you log in the same account that you provided to me? If it is, I will now help to forward the beta again.  And you are not able to access it still, you can register another email account, provide it to me, and I will forward the beta to that account, then you log in this new account only for accessing and upgrading the beta.

Jim Watkins Posted at 2017-11-14 13:54
How do I get the update log?

It seems that you have the same issue as Punchbuggy. Please visit this thread and update the status there: https://forum.dji.com/thread-119550-1-1.html I'll keep follow up for you.

Version 1709 is good with DJI Assistant 2 here on my computer confirmed

Vendex Posted at 2017-11-14 11:23
Here it is: https://dl.djicdn.com/downloads/dji_assistant/20171113/DJI+Assistant+2+1.1.8.exe

Thanks, got it!

DJI Thor Posted at 2017-11-15 00:14
Did you log in the same account that you provided to me? If it is, I will now help to forward the beta again.  And you are not able to access it still, you can register another email account, provide it to me, and I will forward the beta to that account, then you log in this new account only for accessing and upgrading the beta.

Hi Thor, I am still not able to access the Beta from the account that I had provided to you: jaydegbert@gmail.com

I have setup a separate account like you instructed just for the Beta access. The account email is:
bailey.egbert@gmail.com

If you could send the Beta to that account, and let me know, I will try to access it that way. Thank you!

jdegbert Posted at 2017-11-15 18:16
Hi Thor, I am still not able to access the Beta from the account that I had provided to you:

I have setup a separate account like you instructed just for the Beta access. The account email is:

Got it, will let you know when the beta is available.

how long we can get this beta ? i already wait it 3 days now , ineed test it fast  bcs i have job next week and need my drone move smoothly, not like now.
any admin can confirm it  plsss i need it fast
tommy@silaban.net  or tommypatiaraja@gmail.com