My DJI M210 RTK came shipped witht the Dual Gimbal attached. I am attempting to remove the dual Gimbal and install the single Gimbal. After watching all the video on how to install the dual Gimbal BACKWARDS, I am stumped.

The two forward most hole that should recieve the rummer damper that attaches the downward Gimbal appear to be too small to pul the rubber piece below. Please check the vidoe, and let em know what you think.

Thanks

Think you will find they need to be that small to hold the gimbal securely

broadlandboy Posted at 2017-10-17 20:56
Think you will find they need to be that small to hold the gimbal securely

I never did it backwards but several time changed from single- to dual-gimbal.
Maybe there are still those plastic adapters in the metallic holder frame. Extract them and it may fit...
They have to be inserted when changing from single to dual-gimbal.

Ueli Posted at 2017-10-17 23:13
I never did it backwards but several time changed from single- to dual-gimbal.
Maybe there are still those plastic adapters in the metallic holder frame. Extract them and it may fit...
They have to be inserted when changing from single to dual-gimbal.

Thanks Ueli,

I agree, it seems like the adapter, or little insert rings would come out of that piece, but haven't been been to remove them. the screw/adapter ring on the single aft point came off no problem.

NewsFlight24 Posted at 2017-10-18 03:31
Thanks Ueli,

I agree, it seems like the adapter, or little insert rings would come out of that piece, but haven't been been to remove them. the screw/adapter ring on the single aft point came off no problem.

ok.. it WAS in insert! but you need to remove all the little screws on the stereo object avoidance rig to get it out need a lot of force to get it out. scary!. case closed.