Sean-newbie
Captain
Flight distance : 15997 ft
United Kingdom
Offline
|
I just got a 2nd hand P3 pro but have borrowed a P3 adv as well.
I can not connect the App to the controller with either of them.
I have tried several cables which seem to function perfectly when used in other connections and I have tried 2 phones, a Samsung S5 and a Note4 and a Tesco Hudl2 tablet. All three devices have version 3.1.52 of the App and all were downloaded recently from Google's Play Store. The two phones are listed as compatible and the neither the tablet nor the App complained about each other at any point.
As with preceeding posts, once I move off the Inspire 1 page I loose the "Camera" button and it is replaced by a "How to Connect" button which opens a page of instructions with the bottom of the page reading "(4) Enter camera View.
Go back to the equipment page. You should now be able to enter Camera View"
When I press the oval "camera" button the title bar contains "Disconnected" in the centre and any submenus I can enter seem to do nothing
I have tried the C1 + C2 + Record and then 'fiddling' with the "camera settings dial". I write fiddling because I am deaf and can only go by what I see in the videos and what is written in the subtitles if they are available. The latter, for ANY video, are not always accurate.
I can not hear beep codes with certainty.
In one video it appears or is subtiltled that the "camera settings dial" is "toggled" (what does that mean for this particular dial?) whilst in another it appears that it is pressed into the controller.
In those videos, once the "camera settings dial" has been fiddled with, the "Link button", #15, on the drone is momentarily pressed.
When I reach this point I DO NOT see a flashing blue light on the controller ( I have seen one mentioned in one of the videos I have watched)
It would be useful to me to know if C1, C2 & Record are meant to be pressed simultaneously or sequentially and the duration of 'each' press? Likewise what is the required movement of the "camera settings ?
dial"
When the "Link button", #15, on the drone is momentarily pressed the status LEDs start to flash yellow and continue to do so until I have switched the drone off, ditto the link LED but red in colour.
Thanks
|
|