LUK385 Posted at 5-26 18:50
Hi Dji Susan. Could you please send the the link for the 1.11.30 Firmware for a phantom 3 pro. Thank you.

Yes it is for the esc status error. Thank you.

LUK385 Posted at 5-26 18:50
Hi Dji Susan. Could you please send the the link for the 1.11.30 Firmware for a phantom 3 pro. Thank you.

Yes for the esc status error. Thank you

DJI Susan Posted at 2019-7-28 23:55
Do you refer to P3P? If yes, I've sent you a message in PM, please kindly check later, thanks!

Hi susan. I have sent you a PM Regarding the same issue.

Be advised:  Susan hasn't been on this site since Christmas.

DJI Susan Posted at 2017-10-30 22:52
Sir, I've PMed you the download link, please try later.

Hi Dji Susan, can you send the download link of the Firmware v1.11.30, i have p3p thank you

Looking for 1.11.30

Looking  for latest  firmware, any help is greatly appreciated.

Ivadell Posted at 7-30 14:26
Looking  for latest  firmware, any help is greatly appreciated.

Yes, anyone know where to get this version if it actually fixes the problem?

I need help with ESC error on my dji phantom 3 pro!
I hope firmware 1.11.0030 will help me. Please, give me a download link on firmware 1.11.0030.

DJI Susan Posted at 2017-10-29 23:18
Sir, I have PMed you the download link, please check and have a try. Feel free to contact us if you have more questions.

Can you please send me the bin file for phantom 3 professional?

Ruvym Don Posted at 8-23 11:26
Can you please send me the bin file for phantom 3 professional?

Hi, file sent via PM, please check.

___StrangeR___ Posted at 8-22 12:37
I need help with ESC error on my dji phantom 3 pro!
I hope firmware 1.11.0030 will help me. Please, give me a download link on firmware 1.11.0030.

Hi, sent via PM.

LUK385 Posted at 5-26 20:55
Hi susan. I have sent you a PM Regarding the same issue.

I am sorry for the delay, LUK385. PM sent.

Ivadell Posted at 7-30 14:26
Looking  for latest  firmware, any help is greatly appreciated.

Hi, Ivadell, what's the model of your drone?

Steph140718 Posted at 7-20 03:25
Hi Dji Susan, can you send the download link of the Firmware v1.11.30, i have p3p thank you

Hi Steph, sorry for the delay, PM sent.

Boscorosco1 Posted at 7-20 11:10
Looking for 1.11.30

Hi Boscorosco, what's your drone model please? And could you tell me the issue you encountered?

Where did you send it?

DJI Susan Posted at 8-24 04:02
Hi, file sent via PM, please check.

Where did you send it? I didn’t get anything

Ruvym Don Posted at 8-24 18:28
Where did you send it? I didn’t get anything

I had received and replied to your PM. Please check.

DJI Susan Posted at 2017-10-30 22:52
Sir, I've PMed you the download link, please try later.

Susan or whoever is still working this issue...  Please, please need the firmware V.1.11.30 for my p3p - have been working this for 2 days doing all things in forum says.  I have a;    p3X-FW_vo01.11.0030bin however, file will not transfer to microcard with message :  finder can't complete the operation because some data in .bin can't be read or written.  Error code -36.  Please help!!!

Olá, estou com o mesmo problema "ESC ERROR". O drone voava normalmente, após isso ficou guardado por 1 mês, e quando fui ligar apareceu este erro. Os motores não ligam, não é possível voar.

Também acontecia lentidão, atraso na transmissão de sinal de vídeo. mas normalizava quando desconectava e conectava novamente os cabos do gimbal. agora o maior problema é com o "ESC ERROR". Poderia me dar uma solução e me ajudar?

Possuo um P3/ADVANCED

SERIAL N°: P76UDL0282005F

dbkueblercharter.net Posted at 9-3 09:39
Susan or whoever is still working this issue...  Please, please need the firmware V.1.11.30 for my p3p - have been working this for 2 days doing all things in forum says.  I have a;    p3X-FW_vo01.11.0030bin however, file will not transfer to microcard with message :  finder can't complete the operation because some data in .bin can't be read or written.  Error code -36.  Please help!!!

Received the file and firmware in DJI GO says .....20+ is loaded.  Still get same dreaded message "ESC Status Error.  

Can someone please help me trouble shoot this thing??  Didn't fly for two years, upgraded software via app and received same Error message, received "0030" firmware and still motors won't run???  Thanks, Dan K

dbkueblercharter.net Posted at 9-3 09:39
Susan or whoever is still working this issue...  Please, please need the firmware V.1.11.30 for my p3p - have been working this for 2 days doing all things in forum says.  I have a;    p3X-FW_vo01.11.0030bin however, file will not transfer to microcard with message :  finder can't complete the operation because some data in .bin can't be read or written.  Error code -36.  Please help!!!

Moderator - thanks for the 0030 firmware.  Did get it loaded into P3P, however, motors will not start.  Any suggestions??  Thanks, Dan K

dbkueblercharter.net Posted at 9-9 07:10
Moderator - thanks for the 0030 firmware.  Did get it loaded into P3P, however, motors will not start.  Any suggestions??  Thanks, Dan K

Following is my LOG file (Dan K)  hope this gives the clue of why "0030" firmware didn't fix my ESC Status Error didn't fix my dead motor issue....

[00012780]========== remo-con disconnect. boot(15) ============
[00012926]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0x28566489].
[00012962]Packet upgrade start...

[00013006]Packet checking...
[00013047]Packet vlink 01.08.0080 <-> 01.07.0060.
[00013113]Done.

[00013154]Version checking[1]...
[00013233][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013314][03 06][00] v2.4.14.5 -> v2.4.14.5
[00013369][04 00][00] v1.44.0.0 -> v1.44.0.0
[00013468][11 00][00] v1.8.0.0 -> v1.7.15.1
[00013542][12 00][00] v1.10.0.0 -> v1.10.0.0
[00013622][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013697][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013777][12 03][00] v1.10.0.0 -> v1.10.0.0
[00013932][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014022][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014150][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014196][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014242][01 00][00] v1.30.5036 -> v1.30.5036
[00014282][01 01][00] v1.30.5036 -> v1.30.5036
[00014339][08 00][00] v0.13.0.7 -> v0.13.0.7
[00014397][09 00][00] v3.0.0.10 -> v3.0.0.10
[00014441]Packet upgrade cancelled at version checking.



[00013696]========== remo-con disconnect. boot(15) ============
[00013733]Packet [C:\P3X_FW_V01.10.0090.bin] detected, card sn [0x002827d9].
[00013769]Packet upgrade start...

[00013809]Packet checking...
[00013846]Packet vlink 01.10.0090 <-> 01.10.0090.
[00013891]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 0).
[00013930]Done.

[00013965]Version checking[1]...
[00014035][03 05][00] v34.2.0.9 -> v34.2.0.9
[00014117][03 06][00] v2.4.14.5 -> v2.4.20.28 need upgrade.
[00014166][04 00][00] v1.44.0.0 -> v1.48.0.0 need upgrade.
[00014295][11 00][00] v1.7.15.1 -> v1.8.0.0 need upgrade.
[00014435][11 01][00] v1.7.15.1 -> v2.0.0.33, firmware v1.7.15.1 not support.
[00014472][11 01][00] v1.7.15.1 -> v2.0.0.33
[00014575][12 00][00] v1.10.0.0 -> v1.11.0.0 need upgrade.
[00014675][12 01][00] v1.10.0.0 -> v1.11.0.0 need upgrade.
[00014775][12 02][00] v1.10.0.0 -> v1.11.0.0 need upgrade.
[00014964][12 03][00] v1.10.0.0 -> v1.11.0.0 need upgrade.
[00015105][15 00][00] v1.1.2.0 -> v1.1.2.0
[00015199][17 00][00] v1.1.1.7 -> v1.1.1.7
[00015319][17 01][00] v1.0.2.7 -> v1.0.2.7
[00015390][19 00][00] v1.0.8.96 -> v1.0.8.96
[00015430][01 00][00] v1.30.5036 -> v1.32.5432 need upgrade
[00015466][01 01][00] v1.30.5036 -> v1.32.5432 need upgrade
[00015525][08 00][00] v0.13.0.7 -> v0.13.0.7
[00015590][09 00][00] v3.0.0.10 -> v3.0.0.10
[00015636]Done.

[00017675]Waiting for user confirm...
[00027713]Timeout, start upgrade automatically.

[00027803]Firmware upgrading[1]...
[00042456][01 00] Firmware upgrade start...
[00012242][01 00] Firmware upgrade finished successfully.
[00012291]Done.

[00012326]Packet [C:\P3X_FW_V01.10.0090.bin] resumed, card sn [0x002827d9].
[00012371]Packet vlink 01.10.0090 <-> 01.10.0090.
[00012411]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 0).
[00012452]Version checking[2]...
[00012537][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012616][03 06][00] v2.4.14.5 -> v2.4.20.28 need upgrade.
[00012667][04 00][00] v1.44.0.0 -> v1.48.0.0 need upgrade.
[00012797][11 00][00] v1.7.15.1 -> v1.8.0.0 need upgrade.
[00012916][11 01][00] v1.7.15.1 -> v2.0.0.33, firmware v1.7.15.1 not support.
[00012954][11 01][00] v1.7.15.1 -> v2.0.0.33
[00013056][12 00][00] v1.10.0.0 -> v1.11.0.0 need upgrade.
[00013161][12 01][00] v1.10.0.0 -> v1.11.0.0 need upgrade.
[00013244][12 02][00] v1.10.0.0 -> v1.11.0.0 need upgrade.
[00013336][12 03][00] v1.10.0.0 -> v1.11.0.0 need upgrade.
[00013457][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013544][17 00][00] v1.1.1.7 -> v1.1.1.7
[00013665][17 01][00] v1.0.2.7 -> v1.0.2.7
[00013715][19 00][00] v1.0.8.96 -> v1.0.8.96
[00013754][01 00][05] v1.32.5432 -> v1.32.5432
[00013792][01 01][00] v1.30.5036 -> v1.32.5432 need upgrade
[00013848][08 00][00] v0.13.0.7 -> v0.13.0.7
[00013894][09 00][00] v3.0.0.10 -> v3.0.0.10
[00013941]Done.

[00013980]Firmware upgrading[2]...
[00014145][01 01] Firmware upgrade start...
[00044599][01 01] Firmware upgrade finished successfully.
[00044656][12 00] Firmware upgrade start...
[00102290][12 00] Firmware upgrade finished successfully.
[00102345][12 01] Firmware upgrade start...
[00167207][12 01] Firmware upgrade finished successfully.
[00167270][12 02] Firmware upgrade start...
[00226550][12 02] Firmware upgrade finished successfully.
[00226605][12 03] Firmware upgrade start...
[00285025][12 03] Firmware upgrade finished successfully.
[00285078][11 00] Firmware upgrade start...
[00332047][11 00] Firmware upgrade finished successfully.
[00332359][03 06] Firmware upgrade start...
[00741577][03 06] Firmware upgrade finished successfully.
[00741653][04 00] Firmware upgrade start...
[00800401][04 00] Firmware upgrade finished successfully.
[00800443]Done.

[00800484]Version checking[3]...
[00800551][03 05][00] v34.2.0.9 -> v34.2.0.9
[00800630][03 06][05] v2.4.20.28 -> v2.4.20.28
[00800673][04 00][05] v1.48.0.0 -> v1.48.0.0
[00800790][11 00][05] v1.8.0.0 -> v1.8.0.0
[00800910][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00800951][11 01][00] v1.8.0.0 -> v2.0.0.33
[00801044][12 00][05] v1.11.0.0 -> v1.11.0.0
[00801119][12 01][05] v1.11.0.0 -> v1.11.0.0
[00801199][12 02][05] v1.11.0.0 -> v1.11.0.0
[00801323][12 03][05] v1.11.0.0 -> v1.11.0.0
[00801447][15 00][00] v1.1.2.0 -> v1.1.2.0
[00801519][17 00][00] v1.1.1.7 -> v1.1.1.7
[00801633][17 01][00] v1.0.2.7 -> v1.0.2.7
[00801694][19 00][00] v1.0.8.96 -> v1.0.8.96
[00801735][01 00][05] v1.32.5432 -> v1.32.5432
[00801775][01 01][05] v1.32.5432 -> v1.32.5432
[00801827][08 00][00] v0.13.0.7 -> v0.13.0.7
[00801893][09 00][00] v3.0.0.10 -> v3.0.0.10
[00801934]Packet upgrade finish successfully.



[00013282]========== remo-con disconnect. boot(15) ============
[00013359]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x00a4dd4a].
[00013400]Packet upgrade start...

[00013461]Packet checking...
[00013501]Packet vlink 01.11.0020 <-> 01.11.0020.
[00013646]Record vlink 01.10.0090 <-> 01.10.0090 (flow = 0).
[00013683]Done.

[00013722]Version checking[1]...
[00013827][03 06][00] v2.4.20.28 -> v2.4.20.50 need upgrade.
[00013907][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013962][04 00][00] v1.48.0.0 -> v1.48.0.0
[00014087][11 00][00] v1.8.0.0 -> v1.8.0.0
[00014402][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00014444][11 01][00] v1.8.0.0 -> v2.0.0.33
[00014536][12 00][00] v1.11.0.0 -> v1.12.0.0 need upgrade.
[00014642][12 01][00] v1.11.0.0 -> v1.12.0.0 need upgrade.
[00014736][12 02][00] v1.11.0.0 -> v1.12.0.0 need upgrade.
[00014836][12 03][00] v1.11.0.0 -> v1.12.0.0 need upgrade.
[00014970][15 00][00] v1.1.2.0 -> v1.1.2.0
[00015050][17 00][00] v1.1.1.7 -> v1.1.1.7
[00015195][17 01][00] v1.0.2.7 -> v1.0.2.7
[00015261][19 00][00] v1.0.8.96 -> v1.0.8.96
[00015305][01 00][00] v1.32.5432 -> v1.32.5432
[00015348][01 01][00] v1.32.5432 -> v1.32.5432
[00015403][08 00][00] v0.13.0.7 -> v0.13.0.7
[00015461][09 00][00] v3.0.0.10 -> v4.1.0.0 need upgrade.
[00015509]Done.

[00017552]Waiting for user confirm...
[00027590]Timeout, start upgrade automatically.

[00027673]Firmware upgrading[1]...
[00027739][12 00] Firmware upgrade start...
[00090814][12 00] Firmware upgrade finished successfully.
[00090870][12 01] Firmware upgrade start...
[00149644][12 01] Firmware upgrade finished successfully.
[00149702][12 02] Firmware upgrade start...
[00213028][12 02] Firmware upgrade finished successfully.
[00213084][12 03] Firmware upgrade start...
[00275355][12 03] Firmware upgrade finished successfully.
[00275646][03 06] Firmware upgrade start...
[00679465][03 06] Firmware upgrade finished successfully.
[00679544][09 00] Firmware upgrade start...
[00731751][09 00] Firmware upgrade finished successfully.
[00731795]Done.

[00731832]Version checking[2]...
[00731907][03 06][05] v2.4.20.50 -> v2.4.20.50
[00731981][03 05][00] v34.2.0.9 -> v34.2.0.9
[00732028][04 00][00] v1.48.0.0 -> v1.48.0.0
[00732281][11 00][00] v1.8.0.0 -> v1.8.0.0
[00732406][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00732447][11 01][00] v1.8.0.0 -> v2.0.0.33
[00732534][12 00][05] v1.12.0.0 -> v1.12.0.0
[00732621][12 01][05] v1.12.0.0 -> v1.12.0.0
[00732710][12 02][05] v1.12.0.0 -> v1.12.0.0
[00732794][12 03][05] v1.12.0.0 -> v1.12.0.0
[00732938][15 00][00] v1.1.2.0 -> v1.1.2.0
[00733035][17 00][00] v1.1.1.7 -> v1.1.1.7
[00733152][17 01][00] v1.0.2.7 -> v1.0.2.7
[00733211][19 00][00] v1.0.8.96 -> v1.0.8.96
[00733254][01 00][00] v1.32.5432 -> v1.32.5432
[00733294][01 01][00] v1.32.5432 -> v1.32.5432
[00733354][08 00][00] v0.13.0.7 -> v0.13.0.7
[00733410][09 00][05] v4.1.0.0 -> v4.1.0.0
[00733454]Packet upgrade finish successfully.



[00013081]========== remo-con disconnect. boot(15) ============
[00013193]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x00a4dd4a].
[00013242]Packet upgrade start...

[00013306]Packet checking...
[00013350]Packet vlink 01.11.0020 <-> 01.11.0020.
[00013391]Record vlink 01.11.0020 <-> 01.11.0020 (flow = 0).
[00013435]Done.

[00013473]Version checking[1]...
[00013542][03 06][00] v2.4.20.50 -> v2.4.20.50
[00013623][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013684][04 00][00] v1.48.0.0 -> v1.48.0.0
[00013806][11 00][00] v1.8.0.0 -> v1.8.0.0
[00013943][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00013984][11 01][00] v1.8.0.0 -> v2.0.0.33
[00014075][12 00][00] v1.12.0.0 -> v1.12.0.0
[00014175][12 01][00] v1.12.0.0 -> v1.12.0.0
[00014250][12 02][00] v1.12.0.0 -> v1.12.0.0
[00014330][12 03][00] v1.12.0.0 -> v1.12.0.0
[00014470][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014558][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014696][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014766][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014806][01 00][00] v1.32.5432 -> v1.32.5432
[00014851][01 01][00] v1.32.5432 -> v1.32.5432
[00014910][08 00][00] v0.13.0.7 -> v0.13.0.7
[00014967][09 00][00] v4.1.0.0 -> v4.1.0.0
[00015109]Packet upgrade cancelled at version checking.



[00012849]========== remo-con disconnect. boot(15) ============
[00013092]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x00a4dd4a].
[00013143]Packet upgrade start...

[00013206]Packet checking...
[00013252]Packet vlink 01.11.0020 <-> 01.11.0020.
[00013294]Record vlink 01.11.0020 <-> 01.11.0020 (flow = 0).
[00013338]Done.

[00013382]Version checking[1]...
[00013467][03 06][00] v2.4.20.50 -> v2.4.20.50
[00013553][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013601][04 00][00] v1.48.0.0 -> v1.48.0.0
[00013732][11 00][00] v1.8.0.0 -> v1.8.0.0
[00013867][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00013909][11 01][00] v1.8.0.0 -> v2.0.0.33
[00014021][12 00][00] v1.12.0.0 -> v1.12.0.0
[00014130][12 01][00] v1.12.0.0 -> v1.12.0.0
[00014228][12 02][00] v1.12.0.0 -> v1.12.0.0
[00014332][12 03][00] v1.12.0.0 -> v1.12.0.0
[00014469][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014556][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014715][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014782][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014824][01 00][00] v1.32.5432 -> v1.32.5432
[00014870][01 01][00] v1.32.5432 -> v1.32.5432
[00014921][08 00][00] v0.13.0.7 -> v0.13.0.7
[00014983][09 00][00] v4.1.0.0 -> v4.1.0.0
[00015025]Packet upgrade cancelled at version checking.



[00012851]========== remo-con disconnect. boot(15) ============
[00013094]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x00a4dd4a].
[00013148]Packet upgrade start...

[00013214]Packet checking...
[00013260]Packet vlink 01.11.0020 <-> 01.11.0020.
[00013303]Record vlink 01.11.0020 <-> 01.11.0020 (flow = 0).
[00013352]Done.

[00013395]Version checking[1]...
[00013485][03 06][00] v2.4.20.50 -> v2.4.20.50
[00013585][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013639][04 00][00] v1.48.0.0 -> v1.48.0.0
[00013765][11 00][00] v1.8.0.0 -> v1.8.0.0
[00013887][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00014057][11 01][00] v1.8.0.0 -> v2.0.0.33
[00014164][12 00][00] v1.12.0.0 -> v1.12.0.0
[00014250][12 01][00] v1.12.0.0 -> v1.12.0.0
[00014353][12 02][00] v1.12.0.0 -> v1.12.0.0
[00014456][12 03][00] v1.12.0.0 -> v1.12.0.0
[00014609][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014709][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014862][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014920][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014968][01 00][00] v1.32.5432 -> v1.32.5432
[00015012][01 01][00] v1.32.5432 -> v1.32.5432
[00015065][08 00][00] v0.13.0.7 -> v0.13.0.7
[00015120][09 00][00] v4.1.0.0 -> v4.1.0.0
[00015167]Packet upgrade cancelled at version checking.



[00013088]========== remo-con disconnect. boot(15) ============
[00013204]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x00a4dd4a].
[00013252]Packet upgrade start...

[00013320]Packet checking...
[00013366]Packet vlink 01.11.0020 <-> 01.11.0020.
[00013409]Record vlink 01.11.0020 <-> 01.11.0020 (flow = 0).
[00013455]Done.

[00013498]Version checking[1]...
[00013580][03 06][00] v2.4.20.50 -> v2.4.20.50
[00013667][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013716][04 00][00] v1.48.0.0 -> v1.48.0.0
[00013839][11 00][00] v1.8.0.0 -> v1.8.0.0
[00013961][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00014004][11 01][00] v1.8.0.0 -> v2.0.0.33
[00014109][12 00][00] v1.12.0.0 -> v1.12.0.0
[00014208][12 01][00] v1.12.0.0 -> v1.12.0.0
[00014308][12 02][00] v1.12.0.0 -> v1.12.0.0
[00014410][12 03][00] v1.12.0.0 -> v1.12.0.0
[00014585][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014690][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014841][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014896][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014940][01 00][00] v1.32.5432 -> v1.32.5432
[00014989][01 01][00] v1.32.5432 -> v1.32.5432
[00015059][08 00][00] v0.13.0.7 -> v0.13.0.7
[00015115][09 00][00] v4.1.0.0 -> v4.1.0.0
[00015159]Packet upgrade cancelled at version checking.



[00012816]========== remo-con disconnect. boot(15) ============
[00012981]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x00a4dd4a].
[00013033]Packet upgrade start...

[00013080]Packet checking...
[00013134]Packet vlink 01.11.0020 <-> 01.11.0020.
[00013177]Record vlink 01.11.0020 <-> 01.11.0020 (flow = 0).
[00013223]Done.

[00013272]Version checking[1]...
[00013347][03 06][00] v2.4.20.50 -> v2.4.20.50
[00013427][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013480][04 00][00] v1.48.0.0 -> v1.48.0.0
[00013606][11 00][00] v1.8.0.0 -> v1.8.0.0
[00013727][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00013783][11 01][00] v1.8.0.0 -> v2.0.0.33
[00013886][12 00][00] v1.12.0.0 -> v1.12.0.0
[00014000][12 01][00] v1.12.0.0 -> v1.12.0.0
[00014100][12 02][00] v1.12.0.0 -> v1.12.0.0
[00014200][12 03][00] v1.12.0.0 -> v1.12.0.0
[00014341][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014442][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014588][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014651][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014699][01 00][00] v1.32.5432 -> v1.32.5432
[00014750][01 01][00] v1.32.5432 -> v1.32.5432
[00014815][08 00][00] v0.13.0.7 -> v0.13.0.7
[00014890][09 00][00] v4.1.0.0 -> v4.1.0.0
[00014940]Packet upgrade cancelled at version checking.



[00013071]========== remo-con disconnect. boot(15) ============
[00013121]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x00a4dd4a].
[00013168]Packet upgrade start...

[00013216]Packet checking...
[00013270]Packet vlink 01.11.0020 <-> 01.11.0020.
[00013311]Record vlink 01.11.0020 <-> 01.11.0020 (flow = 0).
[00013361]Done.

[00013408]Version checking[1]...
[00013499][03 06][00] v2.4.20.50 -> v2.4.20.50
[00013617][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013673][04 00][00] v1.48.0.0 -> v1.48.0.0
[00013797][11 00][00] v1.7.15.1 -> v1.8.0.0 need upgrade.
[00013937][11 01][00] v1.7.15.1 -> v2.0.0.33, firmware v1.7.15.1 not support.
[00013983][11 01][00] v1.7.15.1 -> v2.0.0.33
[00014085][12 00][00] v1.12.0.0 -> v1.12.0.0
[00014185][12 01][00] v1.12.0.0 -> v1.12.0.0
[00014406][12 02][00] v1.12.0.0 -> v1.12.0.0
[00014505][12 03][00] v1.12.0.0 -> v1.12.0.0
[00014674][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014765][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014905][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014991][19 00][00] v1.0.8.96 -> v1.0.8.96
[00015037][01 00][00] v1.32.5432 -> v1.32.5432
[00015080][01 01][00] v1.32.5432 -> v1.32.5432
[00015136][08 00][00] v0.13.0.7 -> v0.13.0.7
[00015192][09 00][00] v4.1.0.0 -> v4.1.0.0
[00015241]Done.

[00017311]Waiting for user confirm...
[00027360]Timeout, start upgrade automatically.

[00027467]Firmware upgrading[1]...
[00027530][11 00] Firmware upgrade start...
[00074559][11 00] Firmware upgrade finished successfully.
[00074611]Done.

[00074660]Version checking[2]...
[00074759][03 06][00] v2.4.20.50 -> v2.4.20.50
[00074859][03 05][00] v34.2.0.9 -> v34.2.0.9
[00074913][04 00][00] v1.48.0.0 -> v1.48.0.0
[00075059][11 00][05] v1.8.0.0 -> v1.8.0.0
[00075199][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00075247][11 01][00] v1.8.0.0 -> v2.0.0.33
[00075348][12 00][00] v1.12.0.0 -> v1.12.0.0
[00075448][12 01][00] v1.12.0.0 -> v1.12.0.0
[00075548][12 02][00] v1.12.0.0 -> v1.12.0.0
[00075648][12 03][00] v1.12.0.0 -> v1.12.0.0
[00075804][15 00][00] v1.1.2.0 -> v1.1.2.0
[00075908][17 00][00] v1.1.1.7 -> v1.1.1.7
[00076060][17 01][00] v1.0.2.7 -> v1.0.2.7
[00076116][19 00][00] v1.0.8.96 -> v1.0.8.96
[00076166][01 00][00] v1.32.5432 -> v1.32.5432
[00076209][01 01][00] v1.32.5432 -> v1.32.5432
[00076278][08 00][00] v0.13.0.7 -> v0.13.0.7
[00076356][09 00][00] v4.1.0.0 -> v4.1.0.0
[00076402]Packet upgrade finish successfully.



[00012833]========== 2017.07.11 11:52:56. boot(15) ============
[00012878]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x00a4dd4a].
[00012927]Packet upgrade start...

[00012977]Packet checking...
[00013035]Packet vlink 01.11.0020 <-> 01.11.0020.
[00013080]Record vlink 01.11.0020 <-> 01.11.0020 (flow = 0).
[00013237]Done.

[00013287]Version checking[1]...
[00013369][03 06][00] v2.4.20.50 -> v2.4.20.50
[00013454][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013508][04 00][00] v1.48.0.0 -> v1.48.0.0
[00013633][11 00][00] v1.8.0.0 -> v1.8.0.0
[00013768][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00013814][11 01][00] v1.8.0.0 -> v2.0.0.33
[00013921][12 00][00] v1.12.0.0 -> v1.12.0.0
[00014021][12 01][00] v1.12.0.0 -> v1.12.0.0
[00014121][12 02][00] v1.12.0.0 -> v1.12.0.0
[00014221][12 03][00] v1.12.0.0 -> v1.12.0.0
[00014388][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014495][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014651][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014712][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014762][01 00][00] v1.32.5432 -> v1.32.5432
[00014807][01 01][00] v1.32.5432 -> v1.32.5432
[00014875][08 00][00] v0.13.0.7 -> v0.13.0.7
[00014961][09 00][00] v4.1.0.0 -> v4.1.0.0
[00015007]Packet upgrade cancelled at version checking.



[00013232]========== 2017.07.11 12:14:02. boot(15) ============
[00013282]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x00a4dd4a].
[00013329]Packet upgrade start...

[00013386]Packet checking...
[00013440]Packet vlink 01.11.0020 <-> 01.11.0020.
[00013488]Record vlink 01.11.0020 <-> 01.11.0020 (flow = 0).
[00013532]Done.

[00013582]Version checking[1]...
[00013785][03 06][00] v2.4.20.50 -> v2.4.20.50
[00013902][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013961][04 00][00] v1.48.0.0 -> v1.48.0.0
[00019099][11 00][00] v1.8.0.0 -> v1.8.0.0
[00019222][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00019277][11 01][00] v1.8.0.0 -> v2.0.0.33
[00019365][12 00][00] v1.12.0.0 -> v1.12.0.0
[00019464][12 01][00] v1.12.0.0 -> v1.12.0.0
[00019571][12 02][00] v1.12.0.0 -> v1.12.0.0
[00019669][12 03][00] v1.12.0.0 -> v1.12.0.0
[00019816][15 00][00] v1.1.2.0 -> v1.1.2.0
[00019926][17 00][00] v1.1.1.7 -> v1.1.1.7
[00020083][17 01][00] v1.0.2.7 -> v1.0.2.7
[00020150][19 00][00] v1.0.8.96 -> v1.0.8.96
[00020317][01 00][00] v1.32.5432 -> v1.32.5432
[00020375][01 01][00] v1.32.5432 -> v1.32.5432
[00020458][08 00][00] v0.13.0.7 -> v0.13.0.7
[00020515][09 00][00] v4.1.0.0 -> v4.1.0.0
[00020570]Packet upgrade cancelled at version checking.



[00573072]========== 2017.07.14 11:12:24. boot(15) ============
[00573123]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x00a4dd4a].
[00573185]Packet upgrade start...

[00573245]Packet checking...
[00573307]Packet vlink 01.11.0020 <-> 01.11.0020.
[00573360]Record vlink 01.11.0020 <-> 01.11.0020 (flow = 0).
[00573413]Done.

[00573468]Version checking[1]...
[00573558][03 06][00] v2.4.20.50 -> v2.4.20.50
[00573660][03 05][00] v34.2.0.9 -> v34.2.0.9
[00573726][04 00][00] v1.48.0.0 -> v1.48.0.0
[00573838][11 00][00] v1.8.0.0 -> v1.8.0.0
[00573958][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00574011][11 01][00] v1.8.0.0 -> v2.0.0.33
[00574108][12 00][00] v1.12.0.0 -> v1.12.0.0
[00574207][12 01][00] v1.12.0.0 -> v1.12.0.0
[00574287][12 02][00] v1.12.0.0 -> v1.12.0.0
[00574412][12 03][00] v1.12.0.0 -> v1.12.0.0
[00574577][15 00][00] v1.1.2.0 -> v1.1.2.0
[00574668][17 00][00] v1.1.1.7 -> v1.1.1.7
[00574812][17 01][00] v1.0.2.7 -> v1.0.2.7
[00574887][19 00][00] v1.0.8.96 -> v1.0.8.96
[00574951][01 00][00] v1.32.5432 -> v1.32.5432
[00575007][01 01][00] v1.32.5432 -> v1.32.5432
[00575068][08 00][00] v0.13.0.7 -> v0.13.0.7
[00575148][09 00][00] v4.1.0.0 -> v4.1.0.0
[00575203]Packet upgrade cancelled at version checking.



[00013210]========== 2020.09.02 17:31:51. boot(15) ============
[00013269]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x00a4dd4a].
[00013317]Packet upgrade start...

[00013385]Packet checking...
[00013444]Packet vlink 01.11.0020 <-> 01.11.0020.
[00013497]Record vlink 01.11.0020 <-> 01.11.0020 (flow = 0).
[00013548]Done.

[00013601]Version checking[1]...
[00013700][03 06][00] v2.4.20.50 -> v2.4.20.50
[00013801][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013997][04 00][00] v1.48.0.0 -> v1.48.0.0
[00014139][11 00][00] v1.8.0.0 -> v1.8.0.0
[00014259][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00014309][11 01][00] v1.8.0.0 -> v2.0.0.33
[00014414][12 00][00] v1.12.0.0 -> v1.12.0.0
[00014524][12 01][00] v1.12.0.0 -> v1.12.0.0
[00014633][12 02][00] v1.12.0.0 -> v1.12.0.0
[00014731][12 03][00] v1.12.0.0 -> v1.12.0.0
[00014876][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014966][17 00][00] v1.1.1.7 -> v1.1.1.7
[00015122][17 01][00] v1.0.2.7 -> v1.0.2.7
[00015202][19 00][00] v1.0.8.96 -> v1.0.8.96
[00015255][01 00][00] v1.32.5432 -> v1.32.5432
[00015311][01 01][00] v1.32.5432 -> v1.32.5432
[00015381][08 00][00] v0.13.0.7 -> v0.13.0.7
[00015465][09 00][00] v4.1.0.0 -> v4.1.0.0
[00015516]Packet upgrade cancelled at version checking.



[00012888]========== remo-con disconnect. boot(15) ============
[00012960]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x00a4dd4a].
[00013029]Packet upgrade start...

[00013144]Packet checking...
[00013216]Packet vlink 01.11.0020 <-> 01.11.0020.
[00013297]Record vlink 01.11.0020 <-> 01.11.0020 (flow = 0).
[00013365]Done.

[00013435]Version checking[1]...
[00013547][03 06][00] v2.4.20.50 -> v2.4.20.50
[00013667][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013743][04 00][00] v1.48.0.0 -> v1.48.0.0
[00013889][11 00][00] v1.8.0.0 -> v1.8.0.0
[00014047][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00014123][11 01][00] v1.8.0.0 -> v2.0.0.33
[00014254][12 00][00] v1.12.0.0 -> v1.12.0.0
[00014379][12 01][00] v1.12.0.0 -> v1.12.0.0
[00014516][12 02][00] v1.12.0.0 -> v1.12.0.0
[00014639][12 03][00] v1.12.0.0 -> v1.12.0.0
[00014800][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014915][17 00][00] v1.1.1.7 -> v1.1.1.7
[00015075][17 01][00] v1.0.2.7 -> v1.0.2.7
[00015165][19 00][00] v1.0.8.96 -> v1.0.8.96
[00015237][01 00][00] v1.32.5432 -> v1.32.5432
[00015299][01 01][00] v1.32.5432 -> v1.32.5432
[00015393][08 00][00] v0.13.0.7 -> v0.13.0.7
[00015626][09 00][00] v4.1.0.0 -> v4.1.0.0
[00015706]Packet upgrade cancelled at version checking.



[00013382]========== remo-con disconnect. boot(15) ============
[00013440]Packet [C:\P3X_FW_V01.11.0030.bin] detected, card sn [0x00a4dd4a].
[00013497]Packet upgrade start...

[00013563]Packet checking...
[00013617]Packet vlink 01.11.0030 <-> 01.11.0020.
[00013671]Record vlink 01.11.0020 <-> 01.11.0020 (flow = 0).
[00013727]Done.

[00013782]Version checking[1]...
[00013880][03 06][00] v2.4.20.50 -> v2.4.20.50
[00013982][03 05][00] v34.2.0.9 -> v34.2.0.9
[00014045][04 00][00] v1.48.0.0 -> v1.48.0.0
[00014180][11 00][00] v1.8.0.0 -> v1.8.0.0
[00014320][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00014379][11 01][00] v1.8.0.0 -> v2.0.0.33
[00014484][12 00][00] v1.12.0.0 -> v1.13.0.0 need upgrade.
[00014585][12 01][00] v1.12.0.0 -> v1.13.0.0 need upgrade.
[00014685][12 02][00] v1.12.0.0 -> v1.13.0.0 need upgrade.
[00014811][12 03][00] v1.12.0.0 -> v1.13.0.0 need upgrade.
[00014969][15 00][00] v1.1.2.0 -> v1.1.2.0
[00015069][17 00][00] v1.1.1.7 -> v1.1.1.7
[00015209][17 01][00] v1.0.2.7 -> v1.0.2.7
[00015299][19 00][00] v1.0.8.96 -> v1.0.8.96
[00015355][01 00][00] v1.32.5432 -> v1.32.5432
[00015412][01 01][00] v1.32.5432 -> v1.32.5432
[00015488][08 00][00] v0.13.0.7 -> v0.13.0.7
[00015582][09 00][00] v4.1.0.0 -> v4.1.0.0
[00015638]Done.

[00017700]Waiting for user confirm...
[00027752]Timeout, start upgrade automatically.

[00027873]Firmware upgrading[1]...
[00027953][12 00] Firmware upgrade start...
[00082847][12 00] Firmware upgrade finished successfully.
[00082941][12 01] Firmware upgrade start...
[00139258][12 01] Firmware upgrade finished successfully.
[00139345][12 02] Firmware upgrade start...
[00192913][12 02] Firmware upgrade finished successfully.
[00192993][12 03] Firmware upgrade start...
[00251888][12 03] Firmware upgrade finished successfully.
[00251948]Done.

[00252003]Version checking[2]...
[00252234][03 06][00] v2.4.20.50 -> v2.4.20.50
[00252333][03 05][00] v34.2.0.9 -> v34.2.0.9
[00252390][04 00][00] v1.48.0.0 -> v1.48.0.0
[00252537][11 00][00] v1.8.0.0 -> v1.8.0.0
[00252673][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00252732][11 01][00] v1.8.0.0 -> v2.0.0.33
[00252836][12 00][05] v1.13.0.0 -> v1.13.0.0
[00252936][12 01][05] v1.13.0.0 -> v1.13.0.0
[00253042][12 02][05] v1.13.0.0 -> v1.13.0.0
[00253141][12 03][05] v1.13.0.0 -> v1.13.0.0
[00253300][15 00][00] v1.1.2.0 -> v1.1.2.0
[00253402][17 00][00] v1.1.1.7 -> v1.1.1.7
[00253552][17 01][00] v1.0.2.7 -> v1.0.2.7
[00253632][19 00][00] v1.0.8.96 -> v1.0.8.96
[00253685][01 00][00] v1.32.5432 -> v1.32.5432
[00253744][01 01][00] v1.32.5432 -> v1.32.5432
[00253820][08 00][00] v0.13.0.7 -> v0.13.0.7
[00253913][09 00][00] v4.1.0.0 -> v4.1.0.0
[00253973]Packet upgrade finish successfully.



[00221001]========== 2020.09.04 06:29:53. boot(15) ============
[00221058]Packet [C:\P3X_FW_V01.11.0030.bin] detected, card sn [0x00a4dd4a].
[00221120]Packet upgrade start...

[00221183]Packet checking...
[00221249]Packet vlink 01.11.0030 <-> 01.11.0020.
[00221304]Record vlink 01.11.0030 <-> 01.11.0020 (flow = 0).
[00221357]Done.

[00221413]Version checking[1]...
[00221525][03 06][00] v2.4.20.50 -> v2.4.20.50
[00221623][03 05][00] v34.2.0.9 -> v34.2.0.9
[00221694][04 00][00] v1.48.0.0 -> v1.48.0.0
[00221821][11 00][00] v1.8.0.0 -> v1.8.0.0
[00221977][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00222030][11 01][00] v1.8.0.0 -> v2.0.0.33
[00222151][12 00][00] v1.13.0.0 -> v1.13.0.0
[00222244][12 01][00] v1.13.0.0 -> v1.13.0.0
[00222349][12 02][00] v1.13.0.0 -> v1.13.0.0
[00222471][12 03][00] v1.13.0.0 -> v1.13.0.0
[00222617][15 00][00] v1.1.2.0 -> v1.1.2.0
[00222751][17 00][00] v1.1.1.7 -> v1.1.1.7
[00222910][17 01][00] v1.0.2.7 -> v1.0.2.7
[00222995][19 00][00] v1.0.8.96 -> v1.0.8.96
[00223053][01 00][00] v1.32.5432 -> v1.32.5432
[00223214][01 01][00] v1.32.5432 -> v1.32.5432
[00223308][08 00][00] v0.13.0.7 -> v0.13.0.7
[00223381][09 00][00] v4.1.0.0 -> v4.1.0.0
[00223440]Packet upgrade cancelled at version checking.



[00012881]========== remo-con disconnect. boot(15) ============
[00012946]Packet [C:\P3X_FW_V01.11.0030.bin] detected, card sn [0x00a4dd4a].
[00013010]Packet upgrade start...

[00013089]Packet checking...
[00013156]Packet vlink 01.11.0030 <-> 01.11.0020.
[00013220]Record vlink 01.11.0030 <-> 01.11.0020 (flow = 0).
[00013295]Done.

[00013357]Version checking[1]...
[00013462][03 06][00] v2.4.20.50 -> v2.4.20.50
[00013563][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013646][04 00][00] v1.48.0.0 -> v1.48.0.0
[00013781][11 00][00] v1.8.0.0 -> v1.8.0.0
[00013921][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00013987][11 01][00] v1.8.0.0 -> v2.0.0.33
[00014091][12 00][00] v1.13.0.0 -> v1.13.0.0
[00014227][12 01][00] v1.13.0.0 -> v1.13.0.0
[00014330][12 02][00] v1.13.0.0 -> v1.13.0.0
[00014430][12 03][00] v1.13.0.0 -> v1.13.0.0
[00014583][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014686][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014841][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014925][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014995][01 00][00] v1.32.5432 -> v1.32.5432
[00015060][01 01][00] v1.32.5432 -> v1.32.5432
[00015139][08 00][00] v0.13.0.7 -> v0.13.0.7
[00015228][09 00][00] v4.1.0.0 -> v4.1.0.0
[00015292]Packet upgrade cancelled at version checking.



[00012920]========== remo-con disconnect. boot(15) ============
[00012985]Packet [C:\P3X_FW_V01.11.0030.bin] detected, card sn [0x00a4dd4a].
[00013062]Packet upgrade start...

[00013136]Packet checking...
[00013200]Packet vlink 01.11.0030 <-> 01.11.0020.
[00013263]Record vlink 01.11.0030 <-> 01.11.0020 (flow = 0).
[00013325]Done.

[00013389]Version checking[1]...
[00013483][03 06][00] v2.4.20.50 -> v2.4.20.50
[00013584][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013659][04 00][00] v1.48.0.0 -> v1.48.0.0
[00013926][11 00][00] v1.8.0.0 -> v1.8.0.0
[00014082][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00014148][11 01][00] v1.8.0.0 -> v2.0.0.33
[00014267][12 00][00] v1.13.0.0 -> v1.13.0.0
[00014398][12 01][00] v1.13.0.0 -> v1.13.0.0
[00014511][12 02][00] v1.13.0.0 -> v1.13.0.0
[00014614][12 03][00] v1.13.0.0 -> v1.13.0.0
[00014776][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014894][17 00][00] v1.1.1.7 -> v1.1.1.7
[00015052][17 01][00] v1.0.2.7 -> v1.0.2.7
[00015150][19 00][00] v1.0.8.96 -> v1.0.8.96
[00015221][01 00][00] v1.32.5432 -> v1.32.5432
[00015292][01 01][00] v1.32.5432 -> v1.32.5432
[00015369][08 00][00] v0.13.0.7 -> v0.13.0.7
[00015460][09 00][00] v4.1.0.0 -> v4.1.0.0
[00015522]Packet upgrade cancelled at version checking.



[00012818]========== remo-con disconnect. boot(15) ============
[00012875]Packet [C:\P3X_FW_V01.11.0030.bin] detected, card sn [0x00a4dd4a].
[00012933]Packet upgrade start...

[00012999]Packet checking...
[00013062]Packet vlink 01.11.0030 <-> 01.11.0020.
[00013120]Record vlink 01.11.0030 <-> 01.11.0020 (flow = 0).
[00013173]Done.

[00013241]Version checking[1]...
[00013332][03 06][00] v2.4.20.50 -> v2.4.20.50
[00013434][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013498][04 00][00] v1.48.0.0 -> v1.48.0.0
[00013633][11 00][00] v1.8.0.0 -> v1.8.0.0
[00013771][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00013829][11 01][00] v1.8.0.0 -> v2.0.0.33
[00013940][12 00][00] v1.13.0.0 -> v1.13.0.0
[00014040][12 01][00] v1.13.0.0 -> v1.13.0.0
[00014140][12 02][00] v1.13.0.0 -> v1.13.0.0
[00014240][12 03][00] v1.13.0.0 -> v1.13.0.0
[00014407][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014540][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014680][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014756][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014809][01 00][00] v1.32.5432 -> v1.32.5432
[00014870][01 01][00] v1.32.5432 -> v1.32.5432
[00014946][08 00][00] v0.13.0.7 -> v0.13.0.7
[00015036][09 00][00] v4.1.0.0 -> v4.1.0.0
[00015201]Packet upgrade cancelled at version checking.



[00277124]========== remo-con disconnect. boot(15) ============
[00277187]Packet [C:\P3X_FW_V01.11.0030.bin] detected, card sn [0x00a4dd4a].
[00277257]Packet upgrade start...

[00277325]Packet checking...
[00277391]Packet vlink 01.11.0030 <-> 01.11.0020.
[00277454]Record vlink 01.11.0030 <-> 01.11.0020 (flow = 0).
[00277515]Done.

[00277576]Version checking[1]...
[00277683][03 06][00] v2.4.20.50 -> v2.4.20.50
[00277783][03 05][00] v34.2.0.9 -> v34.2.0.9
[00277857][04 00][00] v1.48.0.0 -> v1.48.0.0
[00278004][11 00][00] v1.8.0.0 -> v1.8.0.0
[00278162][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00278223][11 01][00] v1.8.0.0 -> v2.0.0.33
[00278351][12 00][00] v1.13.0.0 -> v1.13.0.0
[00278459][12 01][00] v1.13.0.0 -> v1.13.0.0
[00278582][12 02][00] v1.13.0.0 -> v1.13.0.0
[00278691][12 03][00] v1.13.0.0 -> v1.13.0.0
[00278841][15 00][00] v1.1.2.0 -> v1.1.2.0
[00278927][17 00][00] v1.1.1.7 -> v1.1.1.7
[00279077][17 01][00] v1.0.2.7 -> v1.0.2.7
[00279147][19 00][00] v1.0.8.96 -> v1.0.8.96
[00279205][01 00][00] v1.32.5432 -> v1.32.5432
[00279269][01 01][00] v1.32.5432 -> v1.32.5432
[00279339][08 00][00] v0.13.0.7 -> v0.13.0.7
[00279432][09 00][00] v4.1.0.0 -> v4.1.0.0
[00279493]Packet upgrade cancelled at version checking.



[00012731]========== remo-con disconnect. boot(15) ============
[00012790]Packet [C:\P3X_FW_V01.11.0030.bin] detected, card sn [0x00a4dd4a].
[00012846]Packet upgrade start...

[00012914]Packet checking...
[00012974]Packet vlink 01.11.0030 <-> 01.11.0020.
[00013042]Record vlink 01.11.0030 <-> 01.11.0020 (flow = 0).
[00013101]Done.

[00013159]Version checking[1]...
[00013250][03 06][00] v2.4.20.50 -> v2.4.20.50
[00013349][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013411][04 00][00] v1.48.0.0 -> v1.48.0.0
[00013564][11 00][00] v1.8.0.0 -> v1.8.0.0
[00013703][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00013873][11 01][00] v1.8.0.0 -> v2.0.0.33
[00013993][12 00][00] v1.13.0.0 -> v1.13.0.0
[00014116][12 01][00] v1.13.0.0 -> v1.13.0.0
[00014223][12 02][00] v1.13.0.0 -> v1.13.0.0
[00014349][12 03][00] v1.13.0.0 -> v1.13.0.0
[00014514][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014612][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014783][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014868][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014930][01 00][00] v1.32.5432 -> v1.32.5432
[00014990][01 01][00] v1.32.5432 -> v1.32.5432
[00015073][08 00][00] v0.13.0.7 -> v0.13.0.7
[00015149][09 00][00] v4.1.0.0 -> v4.1.0.0
[00015218]Packet upgrade cancelled at version checking.



[00012681]========== 2020.09.08 11:20:07. boot(15) ============
[00012740]Packet [C:\P3X_FW_V01.11.0030.bin] detected, card sn [0x00a4dd4a].
[00012803]Packet upgrade start...

[00012878]Packet checking...
[00012943]Packet vlink 01.11.0030 <-> 01.11.0020.
[00013005]Record vlink 01.11.0030 <-> 01.11.0020 (flow = 0).
[00013076]Done.

[00013138]Version checking[1]...
[00013238][03 06][00] v2.4.20.50 -> v2.4.20.50
[00013341][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013409][04 00][00] v1.48.0.0 -> v1.48.0.0
[00013579][11 00][00] v1.8.0.0 -> v1.8.0.0
[00013739][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00013799][11 01][00] v1.8.0.0 -> v2.0.0.33
[00013919][12 00][00] v1.13.0.0 -> v1.13.0.0
[00014021][12 01][00] v1.13.0.0 -> v1.13.0.0
[00014144][12 02][00] v1.13.0.0 -> v1.13.0.0
[00014278][12 03][00] v1.13.0.0 -> v1.13.0.0
[00014445][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014543][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014702][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014780][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014843][01 00][00] v1.32.5432 -> v1.32.5432
[00014904][01 01][00] v1.32.5432 -> v1.32.5432
[00014979][08 00][00] v0.13.0.7 -> v0.13.0.7
[00015064][09 00][00] v4.1.0.0 -> v4.1.0.0
[00015126]Packet upgrade cancelled at version checking.



[00012767]========== 2020.09.08 11:23:20. boot(15) ============
[00012950]Packet [C:\P3X_FW_V01.11.0030.bin] detected, card sn [0x00a4dd4a].
[00013010]Packet upgrade start...

[00013088]Packet checking...
[00013154]Packet vlink 01.11.0030 <-> 01.11.0020.
[00013218]Record vlink 01.11.0030 <-> 01.11.0020 (flow = 0).
[00013279]Done.

[00013341]Version checking[1]...
[00013435][03 06][00] v2.4.20.50 -> v2.4.20.50
[00013536][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013607][04 00][00] v1.48.0.0 -> v1.48.0.0
[00013761][11 00][00] v1.8.0.0 -> v1.8.0.0
[00013895][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00013957][11 01][00] v1.8.0.0 -> v2.0.0.33
[00014060][12 00][00] v1.13.0.0 -> v1.13.0.0
[00014164][12 01][00] v1.13.0.0 -> v1.13.0.0
[00014300][12 02][00] v1.13.0.0 -> v1.13.0.0
[00014420][12 03][00] v1.13.0.0 -> v1.13.0.0
[00014604][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014719][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014896][17 01][00] v1.0.2.7 -> v1.0.2.7

Hi DJI Susan, I have a P3A which is displaying ESC error after update. Please can you send me the fix update v1.11.30.
I updated to V1.11.20 a while back and had not used it up until now.
App v3.1.60
Aircraft v1.11.20
Basic fly safe database v01.00.01.09
Remote V1.9.2
Thanks

DJI Susan Posted at 2017-11-12 23:38
The above message has been received. Please check your message in PM to check whether you have received it, thanks!

Brauche auch bitte diese bin datei 1.11.30 !
P3 advanced esc error !

dbkueblercharter.net Posted at 9-9 07:10
Moderator - thanks for the 0030 firmware.  Did get it loaded into P3P, however, motors will not start.  Any suggestions??  Thanks, Dan K

Sorry for the late reply, Dan, so the update finished successfully, right? May I know if there is any error message when you powered on the drone for the motor issue? A screenshot of the app will be appreciated.

HaydenB Posted at 9-21 18:48
Hi DJI Susan, I have a P3A which is displaying ESC error after update. Please can you send me the fix update v1.11.30.
I updated to V1.11.20 a while back and had not used it up until now.
App v3.1.60

Hi HaydenB, firmware has been sent via PM. Please be advised the beta firmware only solves ESC errors that existed after the official firmware update. If it is not the case, the beta firmware may not help, you may need to send the drone back for service.

djiuser_siyGIGBSwlbx Posted at 9-24 16:37
Brauche auch bitte diese bin datei 1.11.30 !
P3 advanced esc error !

Hello there, firmware has been sent via PM. Please be advised the beta firmware only solves ESC errors that existed after the official firmware update. If it is not the case, the beta firmware may not help, you may need to send the drone back for service.

Lindosvaldo Posted at 9-8 06:17
Olá, estou com o mesmo problema "ESC ERROR". O drone voava normalmente, após isso ficou guardado por 1 mês, e quando fui ligar apareceu este erro. Os motores não ligam, não é possível voar.

Também acontecia lentidão, atraso na transmissão de sinal de vídeo. mas normalizava quando desconectava e conectava novamente os cabos do gimbal. agora o maior problema é com o "ESC ERROR". Poderia me dar uma solução e me ajudar?

Hello there, firmware has been sent via PM. Please be advised the beta firmware only solves ESC errors that existed after the official firmware update. If it is not the case, the beta firmware may not help, you may need to send the drone back for service. Please contact our support at http://www.dji.com/support to start a case.

DJI Susan Posted at 8-24 04:02
Hi, file sent via PM, please check.

You you please send me the link to the update aswell please, getting the sam ESC error for about a year on my P3A.  Forcing the same firmware update again and agin only gets it going for a little while; then i have to update agin.

bignasty Posted at 2017-10-25 13:55
It works! updated the firmware and the engines fired up first time. DM me for the link to the download page.

Do you still have a link for this update buddy ?

DJI Susan Posted at 2017-10-29 23:18
Sir, I have PMed you the download link, please check and have a try. Feel free to contact us if you have more questions.

Hellow, i have the same problem, esc error in phantom 3 pro, please send me the link bin file.

Thanks.

lucasgarcia108gmail.com Posted at 10-30 04:49
Hellow, i have the same problem, esc error in phantom 3 pro, please send me the link bin file.

Thanks.

Hi there, link sent via PM, please check.

Finchster Posted at 9-26 06:50
You you please send me the link to the update aswell please, getting the sam ESC error for about a year on my P3A.  Forcing the same firmware update again and agin only gets it going for a little while; then i have to update agin.

Sorry for the delay, the link has been sent in PM.

hi there can somebody send me the link with P3A 1.11.30 fw update please?

djiuser_Suxv5BZWwLkC Posted at 11-3 02:05
hi there can somebody send me the link with P3A 1.11.30 fw update please?

Hi there, the link is sent in PM, please check.

Having the ESC error on my phantom 3 pro after update, can I please get the P3P 1.11.30 firmware download link. Thanks!

hello ... I have a phanton 3 pro and out of nowhere I get the error "ESC status error" update the firmware v1.11.0030 and I could not solve the problem ... can you help me?  Thank you, I await your contact

Hi Susan, I also have the ESC Error problem with the Phantom 3 Pro. It appeared by surprise with the fully functional drone.
Is there a procedure to reset the error or the only way is to update with firmware 1.11.30?
I sent you a private message.
Thanks, Giovy