robinby04
New
New Zealand
Offline
|
Hi guys,
I hadn't flown my P3A for quite some time, and last weekend decided to take it out for a spin. When I did this, I noticed my live feed was very delayed.
I researched how to fix this, and I found that if I took the whole camera/gimbal off the drone, disconnecting the 2 wires, and then connecting them back again, it should fix my issue.
I did this, and it seems to have worked, my live feed is back to normal. BUT when i go into the aircraft status in the DJI GO app, at the bottom, the Gimbal Status says 'Disconnected'.
I don't know if this was an issue before disconnecting the camera/gimbal or if it happened when I did the fix, but I can't get it to go away.
Everything seems to work, the gimbal is in the usual position, all lights are green, there are no warning messages, when I fly the drone the camera works just as normal and I can move the camera up and down as usual. I can even calibrate the gimbal, but the gimbal status still says Disconnected...
Any help on the matter? Should I be worried, should I just fly it regardless?
Thanks.
|
|