Hi,
My drone keeps showing strong wireless interfernce with unstable live feed and disconnection during the flight most of the time!!!

I did calibration for RC, IMU, compass and VPS as dji support team suggestion but nothing changed..

Please help!!!!!???
http://.

Post up a video to show what happening.

Try a different location, preferably in a rural area.

Two remedies. Try putting your Phone/Tablet in "Airplane Mode" Second switch up to 5.8 gHz in your RC.

Please check the HD settings and choose a channel with less interference. Besides, try to change another location to fly.

Rodger8 Posted at 2017-11-4 13:19
Two remedies. Try putting your Phone/Tablet in "Airplane Mode" Second switch up to 5.8 gHz in your RC.

There is no option in HD menu to change the frequencey. Where I can find??

ALABAMA Posted at 2017-11-4 04:15
Try a different location, preferably in a rural area.

Everywhere I get same message "strong wireless interference" and sometimes "weak image transmission"

DJI Thor Posted at 2017-11-4 20:13
Please check the HD settings and choose a channel with less interference. Besides, try to change another location to fly.

I will try with different channels.
Hope this work for me.
Thanks

fans872ab42b Posted at 2017-11-5 09:30
There is no option in HD menu to change the frequencey. Where I can find??

Which Phantom are you using? I was referring to the P4P.

Rodger8 Posted at 2017-11-6 03:21
Which Phantom are you using? I was referring to the P4P.

Phantom 4

I get error messages such as this often. Although disconcerting I fly for awhile. So far all have been uneventful. If "it ain't broke don't fix it" applies here IMHO. That's why I have insurance.

fans872ab42b Posted at 2017-11-6 04:00
Phantom 4

I'll get back to you with it

fans872ab42b Posted at 2017-11-6 04:00
Phantom 4

I believe the 5.8 gHz is only on the Pro version.

Rodger8 Posted at 2017-11-7 05:26
I believe the 5.8 gHz is only on the Pro version.

Sure? Because even if i select p4p, there is no option to select frequency!!

fans872ab42b Posted at 2017-11-7 05:33
Sure? Because even if i select p4p, there is no option to select frequency!!

Do you have a P4P?

Rodger8 Posted at 2017-11-8 02:13
Do you have a P4P?

No
I have  phantom 4

fans872ab42b Posted at 2017-11-8 04:14
No
I have  phantom 4

I believe only the P4P has the 5.8. I set up a new one yesterday and it is in the "HD" menu where you have the choice of the 2.4 or 5.8.

M.C. Pilot Posted at 2017-11-4 03:26
Post up a video to show what's happening.

https://1drv.ms/v/s!AuApB-xDtKi5iidtrAiYiARxw5Pk

fans872ab42b Posted at 2017-11-15 04:19
https://1drv.ms/v/s!AuApB-xDtKi5iidtrAiYiARxw5Pk

Wow, yeah right definitely right about that, you had serious issues with interference. Were you flying the P4 is an open wide area? From the video you were 415 ft at one point but noticed, you weren't too far 835 meters, or a little over 2k feet..anything you think that might have been blocking the signal from RC to AC?

Battery levels were fine from the video.

M.C. Pilot Posted at 2017-11-15 05:40
Wow, yeah right definitely right about that, you had serious issues with interference. Were you flying the P4 is an open wide area? From the video you were 415 ft at one point but noticed, you weren't too far 835 meters, or a little over 2k feet..anything you think that might have been blocking the signal from RC to AC?

Battery levels were fine from the video.

No comment..

I have phantom 3 pro flying same place but never had issues like this   

Rodger8 Posted at 2017-11-9 05:31
I believe only the P4P has the 5.8. I set up a new one yesterday and it is in the "HD" menu where you have the choice of the 2.4 or 5.8.

Please check my video posted through the link

fans872ab42b Posted at 2017-11-15 11:12
Please check my video posted through the link

I do not see the link

fans872ab42b Posted at 2017-11-15 11:12
Please check my video posted through the link

You are flying in a very urban area, so you have to expect strong interference, it is a fact of life when flying these machines. But you were well above the permissable altitude limit at 415 Metres, or 1360 feet, and flying at night. Not a good thing to do.

Rodger8 Posted at 2017-11-15 18:02
I do not see the link

https://1drv.ms/v/s!AuApB-xDtKi5iidtrAiYiARxw5Pk

Rodger8 Posted at 2017-11-15 18:02
I do not see the link

https://1drv.ms/v/s!AuApB-xDtKi5iidtrAiYiARxw5Pk

fans872ab42b Posted at 2017-11-15 22:51
https://1drv.ms/v/s!AuApB-xDtKi5iidtrAiYiARxw5Pk

My Phantom 4 worked perfectly until I upgraded the firmware on both the drone and RC a few weeks ago; after which I kept receiving this error message, along with all kinds of other irritating symptoms. I finally visited a local DJI repair shop (Omniview Tech, Toronto), where they advised me to wait for the next firmware update, as all their other P4 drones in their shop exhibited the same problem.

I'm still waiting.