Please select Into the mobile phone version | Continue to access the computer ver.
Lost photo options with firmware upgrade
528 3 2017-11-14
Uploading and Loding Picture ...(0/1)
o(^-^)o
Sliderul
lvl.3
Flight distance : 501942 ft
United States
Offline

I just upgraded the DJI GO 4 application (V 4.1.14) as well as the firmware (V 01.00.0701) on my Spark. When I tried to test it out I found that instead of now having the ability to take spherical photos I've lost all photo options except single shot. I shut everything down and tried again with the same result. According to DJI Assistant the upgrade was successfully completed and I'm at a loss as to how to correct the problem.

2017-11-14
Use props
fansbd30b82d
lvl.3
Flight distance : 26906 ft
Dominican Republic
Offline

try reflashing the firmware , and let us know
2017-11-14
Use props
Sliderul
lvl.3
Flight distance : 501942 ft
United States
Offline

fansbd30b82d Posted at 2017-11-14 10:04
try reflashing the firmware , and let us know

Found the problem - my SD card had been damaged and needed to be replaced. All photo options appear now.
2017-11-14
Use props
DJI Elektra
Administrator
China
Offline

Sliderul Posted at 2017-11-14 19:18
Found the problem - my SD card had been damaged and needed to be replaced. All photo options appear now.

Here is the recommended SD card. Please take the info as reference:

Sandisk 16GB UHS-1 Micro SDHC
Sandisk 32GB UHS-1 Micro SDHC
Sandisk 64GB UHS-1 Micro SDXC
Kinston 16GB UHS-1 Micro SDHC
Kinston 32GB UHS-1 Micro SDHC
Kinston 64GB UHS-1 Micro SDXC
Samsung 16G UHS-I Micro SDHC
Samsung 32G UHS-I Micro SDHC
Samsung 64G UHS-I Micro SDXC

2017-11-14
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules