Please select Into the mobile phone version | Continue to access the computer ver.
Helps to identify FIRMWARE from the update log.
929 10 2017-11-22
Uploading and Loding Picture ...(0/1)
o(^-^)o
C&A I.A
lvl.3
Flight distance : 312579 ft
Brazil
Offline

Why would any more experienced user or an administrator help me identify which firmware is installed on my P3A? the log file is below. Thanks in advance.

This is a log-only clipping.
Full LOG < Here



00011942]========== remo-con disconnect. boot(15) ============  [00012059]Packet [C:\P3S_FW_V01.11.0020.bin] detected, card sn [0x20b80b96].  [00012095]Packet upgrade start...   [00012132]Packet checking...  [00012162]Packet vlink 01.11.0020 <-> 01.11.0020.  [00012224]Done.   [00012261]Version checking[1]...  [00012340][03 06][00] v2.1.6.18 -> v2.4.20.50 need upgrade.  [00012423][03 05][00] v34.2.0.8 -> v34.2.0.9 need upgrade.  [00012464][04 00][00] v1.44.0.0 -> v1.48.0.0 need upgrade.  [00012778][11 00][00] v1.8.0.0 -> v1.8.0.0  [00012898][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.  [00012937][11 01][00] v1.8.0.0 -> v2.0.0.33  [00013031][12 00][00] v1.8.0.0 -> v1.12.0.0 need upgrade.  [00013107][12 01][00] v1.8.0.0 -> v1.12.0.0 need upgrade.  [00013207][12 02][00] v1.8.0.0 -> v1.12.0.0 need upgrade.  [00013281][12 03][00] v1.8.0.0 -> v1.12.0.0 need upgrade.  [00017813][15 00][00] v1.1.2.0 -> v1.1.2.0  [00017886][17 00][00] v1.1.1.7 -> v1.1.1.7  [00018006][17 01][00] v1.0.2.7 -> v1.0.2.7  [00018058][19 00][00] v255.255.255.254 -> v1.0.8.96  [00018087][01 00][00] v1.23.4920 -> v1.25.5432 need upgrade  [00018133][01 01][00] v1.23.4920 -> v1.25.5432 need upgrade  [00018177][09 00][00] v3.0.0.10 -> v4.1.0.0 need upgrade.  [00018210]Done.   [00020244]Waiting for user confirm...  [00030281]Timeout, start upgrade automatically.   [00030348]Firmware upgrading[1]...  [00045433][01 00] Firmware upgrade start...  [00011742][01 00] Firmware upgrade finished successfully.  [00011783]Done.   [00011816]Packet [C:\P3S_FW_V01.11.0020.bin] resumed, card sn [0x20b80b96].  [00011851]Packet vlink 01.11.0020 <-> 01.11.0020.  [00011919]Version checking[2]...  [00012007][03 06][00] v2.1.6.18 -> v2.4.20.50 need upgrade.  [00012088][03 05][00] v34.2.0.8 -> v34.2.0.9 need upgrade.  [00012134][04 00][00] v1.44.0.0 -> v1.48.0.0 need upgrade.  [00012247][11 00][00] v1.8.0.0 -> v1.8.0.0  [00012367][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.  [00012399][11 01][00] v1.8.0.0 -> v2.0.0.33  [00012581][12 00][00] v1.8.0.0 -> v1.12.0.0 need upgrade.  [00012681][12 01][00] v1.8.0.0 -> v1.12.0.0 need upgrade.  [00012758][12 02][00] v1.8.0.0 -> v1.12.0.0 need upgrade.  [00012857][12 03][00] v1.8.0.0 -> v1.12.0.0 need upgrade.  [00017391][15 00][00] v1.1.2.0 -> v1.1.2.0  [00017472][17 00][00] v1.1.1.7 -> v1.1.1.7  [00017591][17 01][00] v1.0.2.7 -> v1.0.2.7  [00017647][19 00][00] v255.255.255.254 -> v1.0.8.96  [00017680][01 00][05] v1.25.5432 -> v1.25.5432  [00017714][01 01][00] v1.23.4920 -> v1.25.5432 need upgrade  [00017806][09 00][00] v3.0.0.10 -> v4.1.0.0 need upgrade.  [00017838]Done.   [00017871]Firmware upgrading[2]...  [00018017][01 01] Firmware upgrade start...  [00048281][01 01] Firmware upgrade finished successfully.  [00048337][12 00] Firmware upgrade start...  [00128277][12 00] Firmware upgrade finished successfully.  [00128327][12 01] Firmware upgrade start...  [00207442][12 01] Firmware upgrade finished successfully.  [00207493][12 02] Firmware upgrade start...  [00271681][12 02] Firmware upgrade finished successfully.  [00271741][12 03] Firmware upgrade start...  [00336165][12 03] Firmware upgrade finished successfully.  [00336213][03 05] Firmware upgrade start...  [00399204][03 05] Firmware upgrade finished successfully.  [00399479][03 06] Firmware upgrade start...  [00773441][03 06] Firmware upgrade finished successfully.  [00773495][09 00] Firmware upgrade start...  [00825692][09 00] Firmware upgrade finished successfully.  [00825762][04 00] Firmware upgrade start...  [00884124][04 00] Firmware upgrade finished successfully.  [00884165]Done.   [00884198]Version checking[3]...  [00884269][03 06][05] v2.4.20.50 -> v2.4.20.50  [00884348][03 05][05] v34.2.0.9 -> v34.2.0.9  [00884385][04 00][05] v1.48.0.0 -> v1.48.0.0  [00884488][11 00][00] v1.8.0.0 -> v1.8.0.0  [00884613][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.  [00884651][11 01][00] v1.8.0.0 -> v2.0.0.33  [00884738][12 00][05] v1.12.0.0 -> v1.12.0.0  [00884922][12 01][05] v1.12.0.0 -> v1.12.0.0  [00885022][12 02][05] v1.12.0.0 -> v1.12.0.0  [00885103][12 03][05] v1.12.0.0 -> v1.12.0.0  [00885148][15 00][00] v1.1.2.0 -> v1.1.2.0  [00885237][17 00][00] v1.1.1.7 -> v1.1.1.7  [00885362][17 01][00] v1.0.2.7 -> v1.0.2.7  [00885409][19 00][00] v255.255.255.254 -> v1.0.8.96  [00885444][01 00][05] v1.25.5432 -> v1.25.5432  [00885483][01 01][05] v1.25.5432 -> v1.25.5432  [00885527][09 00][05] v4.1.0.0 -> v4.1.0.0  [00885564]Packet upgrade finish successfully.

2017-11-22
Use props
RedHotPoker
Captain
Flight distance : 165105 ft
Canada
Offline

If you look in the app  for 'About' your current versions will be listed in there.



RedHotPoker
2017-11-22
Use props
ALABAMA
Captain
Flight distance : 10442687 ft
United States
Offline

V1.11.20 is your current
2017-11-22
Use props
C&A I.A
lvl.3
Flight distance : 312579 ft
Brazil
Offline

help me identify what it says in the log please
2017-11-22
Use props
DJI Elektra
Administrator
China
Offline

C&A I.A Posted at 2017-11-22 19:21
help me identify what it says in the log please

Did you crash your drone before? Any message from your app, please provide more information for us to check.
2017-11-23
Use props
C&A I.A
lvl.3
Flight distance : 312579 ft
Brazil
Offline

DJI Elektra Posted at 2017-11-23 02:21
Did you crash your drone before? Any message from your app, please provide more information for us to check.

Hi Elektra, if the "crash" you are referring to is a knock, fall or something similar to a shock against something the answer is no, I had no crash. But I had an error while linking the AC when I connected to the RC and the DjiGo application.
2017-11-23
Use props
C&A I.A
lvl.3
Flight distance : 312579 ft
Brazil
Offline

DJI Elektra Posted at 2017-11-23 02:21
Did you crash your drone before? Any message from your app, please provide more information for us to check.

I'm using the Galaxy A7 2017 smartphone SM-A720F Android 7.0. until that happened everything worked out well until I made a review in Google Play 5 stars. I'm a week from now without flying and I can not find the right way to resuscitate my p3a. I'm having financial damage with all this but I really want to be able to fix the problem. Please ask me everything that is necessary about my equipment, I have already done several procedures all without success. if it is price I will shoot the p3a command logs .. Now at the moment I am trying to downgrade forced with the debug file to the lowest version to try to update everything again.
2017-11-23
Use props
DJI Diana
Administrator
Flight distance : 2408 ft

Offline

Hi there, I checked your log, there are lots of modules of the drone can't be detected, as you can see the screenshot below. I would recommend you send the done in for diagnosis and repair. Please refer to this link to contact the Support. https://www.dji.com/support?site=brandsite&from=nav    1.png
2017-11-26
Use props
C&A I.A
lvl.3
Flight distance : 312579 ft
Brazil
Offline

Diana, I have news. I had a breakthrough here with my P3A. I'll try to explain as simply as possible because of the translation.   (to remind my drone is not in warranty)  On Saturday 25th, I was unhappy with the results I was having decided to disassemble some parts of my P3A and you do not know what I discovered !! when dismounting the support of the "vision positioning" I noticed that the electronic plates that are inside this support were leaning against each other, causing that the aircraft did not initiate the link for pairing with the control. I loosened the screws and it was immediate .. the link light came on and the pairing with the RC was done at the same time as magic. I was lucky that nothing burned, because there is a sign on the overheating plates. I do not know why these boards were leaning against each other, I think moisture combined with heat eventually swelled these electronic boards. Now I had another problem. When checking the firmware installed through the DJIGO application I noticed that the downgrade attempts I made had some efficiency .. I forced downgrade to one of the first versions, version 1.9.3 that ended up getting 1.1.9+, and now the memory card reader no longer recognizes the * .bin. Firmware .. reminding that the memory card is recognized by the gimbal .. but he does not read or record anything. It does not create logs, it does not update .. when I turned on the drone I also noticed that the locolized LED on the gimbal flashes twice and goes out completely .. and if I leave without a card there the LED blinks incessantly in red. I am now looking for an advanced way to re-upgrade my aircraft. Please help me. If there is any doubt in my answer I ask you to inform me the section where it was confused so that I can translate again ..
2017-11-27
Use props
C&A I.A
lvl.3
Flight distance : 312579 ft
Brazil
Offline

DJI Diana Posted at 2017-11-26 22:34
Hi there, I checked your log, there are lots of modules of the drone can't be detected, as you can see the screenshot below. I would recommend you send the done in for diagnosis and repair. Please refer to this link to contact the Support. https://www.dji.com/support?site=brandsite&from=nav   [view_image]

corrected post
Current Firmware installed is 1.1.9, showing 1.1.9+
2017-11-27
Use props
DJI Elektra
Administrator
China
Offline

C&A I.A Posted at 2017-11-27 13:54
corrected post
Current Firmware installed is 1.1.9, showing 1.1.9+

Thanks for your update. Please follow the Diana's advice and send it back for check.
2017-12-1
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules