Danny Lieux II Posted at 3-9 16:03
How do I get the new firmware update for the 3 SE, I'm still having signal lost issues after a few meters up. this is really becoming a major issue with this drone.

See this tutorial regarding the antenna positioning:

Thanks for the video and reply, I tried repositioning my antenna pointing it directly towards my drone and still had the same issue not sure what's really going on I'm starting to think it's a problem with the signal itself on the drone.

Danny Lieux II hello !! , please check this ; numbers of channels in 2,4Ghz Band in the app/ wifi / channels

if you got 13 channels you are in CE mODE  , This is the problem

Im in Spain , same bird and same Firmware , but i get 11 channels ( FCC)

tHE PHANTOM Can reach 4 km in open field

anyway , you can see all info about this issue here :

Switch to FCC mode in Europe, and fly miles instead of just 300 meters with P3SE
https://phantompilots.com/thread ... s-with-p3se.128089/

Ok I will try that for sure and let ya know if it worked, thanks for the great input

Ok so can someone explain to me now why my camera is flipping out now I just put a new ribbon cable on it and it's still flipping out like crazy

Can someone please explain to me what causes a camera to flip out like crazy even after a new ribbon just installed

i see little sympthoms of crash in these pics ... maybe this is the prob

@DJI Thor   testtesttesttesttesttesttesttesttesttesttesttest

Nebuchadnezzar Posted at 3-12 23:51
i see little sympthoms of crash in these pics ... maybe this is the prob

Actually i havent crashed it, i was flying last Sunday with another buddy who has an inspire and whilenin flight it started flipping out. I landed it and it was going crazy not sure how it happened or why but i already sent it to DJI s9 hopefully they can tell me whats goong on with the issues.

I urgently need the firmware for the phantom 3 SE. this crap doesn't walk more than 300 meters with firmware 1.5.40. DJI must have a new firmware for the phantom 3 SE spacecraft, or else give the money I gave for the phantom that does not work with this firmware. DJI solves the problem or I want the money back ...

djiuser_6FloZV87IKj1 Posted at 6-29 08:33
I urgently need the firmware for the phantom 3 SE. this crap doesn't walk more than 300 meters with firmware 1.5.40. DJI must have a new firmware for the phantom 3 SE spacecraft, or else give the money I gave for the phantom that does not work with this firmware. DJI solves the problem or I want the money back ...

The Really Problem is : Yor Phantom 3 SE runs in very low power transmission signal , it is  CE (eUROPE)


Try the Dji go app in FCC , Your Phantom will get a long range then .....

Check the wifi settings in the Dji go app , check the 2,4 Ghz bAND, you ll see 13 Channels , this mean your dRONE is IN CE mode ( eUROPE Low Range)

With the Dji app in FCC mODE you ll get 11 channels , this LL mean your drone is in FCC mode , USA (More Range)