Has anyone been able to sync your flights from the pilot app.   how about uploading them to Airdata?

A work around is to use a slave controller running GO4

Thank you Broadlandboy.   Looks like i need to get a slave controller too.   they sure do make it difficult at times.

Broadlandboy. Are you sure this will work? If you use on the master controller the DJI Pilot App, can you use on the slave controller the DJI GO 4 app?
ETA: I tested with airdata but from my M210 I get only the flight data from the flights with the DJI GO 4 app and not when using the DJI Pilot app.

Zuidwestdrones Posted at 2017-12-24 04:05
Broadlandboy. Are you sure this will work? If you use on the master controller the DJI Pilot App, can you use on the slave controller the DJI GO 4 app?
ETA: I tested with airdata but from my M210 I get only the flight data from the flights with the DJI GO 4 app and not when using the DJI Pilot app.

Works for me. Slave needs to be Go4 if flying Pilot on master. Flown UgCS/ Pix4d capture & Pilot on master & slave Go4 successfully recorded to Airdata,

broadlandboy Posted at 2017-12-24 10:58
Works for me. Slave needs to be Go4 if flying Pilot on master. Flown UgCS/ Pix4d capture & Pilot on master & slave Go4 successfully recorded to Airdata,

You're wright when I use my X4S, but when I use my XT, I can't use the G04 on the slave because I don't get the output of the temperature. And also when I use the dual downward gimbal on my M210, I can't use the GO4 app. I am prompted to use the Pilot app on the slave too.

Zuidwestdrones Posted at 2017-12-29 07:56
You're wright when I use my X4S, but when I use my XT, I can't use the G04 on the slave because I don't get the output of the temperature. And also when I use the dual downward gimbal on my M210, I can't use the GO4 app. I am prompted to use the Pilot app on the slave too.

Have you tried it with Go4 on the slave. If you are only using the slave for flight records do you need an image on the screen as long as it records the flight?
Fly with master & forget about slave as long as it records flight data, just have it connected.

broadlandboy Posted at 2017-12-29 08:31
Have you tried it with Go4 on the slave. If you are only using the slave for flight records do you need an image on the screen as long as it records the flight?
Fly with master & forget about slave as long as it records flight data, just have it connected.

Yes I did try it with GO 4 on the slave. Only wit X4S it works fine, but not with XT and dual downward gimbal. I need the slave for my cameraman or engineer who needs to have control of the gimbal, but when he has to use the Pilot app on the slave, I don't get the flight records, unfortunally.

Didn't realise you were already using a slave unit.

Hi

You can upload files to Google drive and share link to whoever you want.

First confirm with DJI if you can use your particular drone with DJI Pilot. I lost my Spark while using it and they refuse to open a case, even to see whether there was a problem by studying the DJI GO 4 information.

The Pilot app does not tell you which drones are compatible with it, nor will your drone warn you not to use it.

DJI have told me it's a third party app, it's not compatible with Spark and also that they can't open a case because they can't get the data from Pilot, even though I sent them the Pilot flight data via Google Drive.

DJI WILL find all sorts of excuses not to open a case if you use the Pilot app.

Could download files from Crystalsky dji flight data and upload to AIRDATA... LONG WAY AROUND.