Please select Into the mobile phone version | Continue to access the computer ver.
Controller would not link ... lesson learned!
564 0 2015-4-23
Uploading and Loding Picture ...(0/1)
o(^-^)o
kirk.pleasant
lvl.2

Qatar
Offline

I have 2 Inspire 1's and I have not flown the backup since the update (it updated ok and I tested it out for 5 minutes after the update)
Today I went to turn it on and the controller would not link...
I tired to link the onther 2 controllers and they also would not link to the Inspire- I started to panic!
I decided to put in the updated bin file again so I removed the SD card and the controllers conected straight away.
when I checked the SD card it still had the bin file and txt file on it. I deleted them and re inserted the sd card and there was no issues connecting!
So the lesson I learned is to ensure the bin file is removed from the sd card after an update.

Cheers


2015-4-23
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules