yes, the URL firmware download on the z30 product page works but it still not functional on the matrice 210 product page https://www.dji.com/matrice-200-series/info#downloads
nonetheless, i managed to successfully update my z30 without issues.
thanks
kozlio# Posted at 2018-1-24 17:54
yes, the URL firmware download on the z30 product page works but it still not functional on the matrice 210 product page
https://www.dji.com/matrice-200-series/info#downloads
nonetheless, i managed to successfully update my z30 without issues.
DJI Mindy Posted at 2018-1-24 04:19
YOYOMAN, thanks for your feedback, I have confirmed with related team, the release note has been updated, please refresh later, thank you.
I refresh every day from your message...still no note.
one more time: we are very happy to see how you manage your "pro"'s customers....
YOYOMAN Posted at 2018-1-27 06:56
I refresh every day from your message...still no note.
one more time: we are very happy to see how you manage your "pro"'s customers....
Dear YOYOMAN, the release note has been updated in our website, thanks for your attention.
i see a very minor drift at 30x zoom, fully zoomed in. i dont consider this an issue for me. i got the latest firmware and confirmed i have the latest z30 firmware from last month.
We are recently procured DJI M210, Zenmuse Z30 and Zenmuse XT each two in quantity. We updated all the firmware’s and start to fly the two drones but one is working fine another Z30 would not initialize fully and the camera just sits on its side after turning on the M210. No signal from the camera and DJI Go 4 showing Aircraft Encoder Error (0x400000) image attached.
log file details
[ 25.499266] <<<==== INTO SD CARD UPDATE CHECK MODE upgrade ====>>>
[ 25.503979] Firmware packet number on sd card:1.
[ 25.508015] Packet: [/mnt/usb/Z30_FW_V01.00.00.47.bin];
[ 25.513868] New Firmware, version:1.0.0.47.
[ 25.518335] Update mode: Normal
[ 33.522975] [0x1 0]V1.0.58 -> V1.0.60 need upgrade
[ 35.486035] [0x1 0] Firmware upgrade start...
[ 42.728648] [0x1 0] Firmware upgrade success.
[ 45.732613] Firmware Upgrade Done.
[ 45.736540] Result: Failed.
[ 45.740401] Reboot the remote controller and try upgrade the firmware again.
[ 5.286939] <<<==== INTO SD CARD UPDATE CHECK MODE upgrade ====>>>
[ 5.295754] Firmware packet number on sd card:1.
[ 5.300171] Packet: [/mnt/usb/Z30_FW_V01.00.00.47.bin];
[ 5.307446] New Firmware, version:1.0.0.47.
[ 5.313062] Update mode: Normal
[ 13.321204] [0x1 0]V1.0.60 -> V1.0.60 not need upgrade
[ 13.325390] Check Firmware Done.
[ 13.329706] Check Result: Error.
[ 13.333940] Failed to obatin firmware version. Power cycle the drone to upgrade the firmware again.