Please select Into the mobile phone version | Continue to access the computer ver.
Firmware v1.11.30 (why is this not an official release)
123Next >
5927 88 2018-1-25
Uploading and Loding Picture ...(0/1)
o(^-^)o
Chris_A
Second Officer
Flight distance : 6142 ft
United Kingdom
Offline

All, being new to DJI, I've read a lot of threads detailing ESC errors (associated to the P3A/P3P) that could be fixed by installing the latest firmware (v1.11.30). However, I'm somewhat purplexed that this firmware is not available via the normal channels (i.e. DJI's official website - via their download page, this is still shown as v1.11.20). So, I'm assuming that this is an unofficial release of firmware? Does this invalidate the warranty if installed? Don't get me wrong, I've have been known in the past to cut lose and dop the odd unsupported / unofficial software onto my equipment, I'm just curious why it's not available for official download???

Thanks

/Chris

2018-1-25
Use props
Nebuchadnezzar
Captain
Flight distance : 2385246 ft
Spain
Offline

this is like the world of dreams where everything is possible , welcome aboard
2018-1-25
Use props
solentlife
Captain
Flight distance : 1087530 ft
Latvia
Offline

You wont get an official answer ............

I tried repeatedly - even through other channels.

It appears that DJI regard the version to download on their WebSite to be stable and good for the 'masses' ... I in fact use this and have no problems with my P3P.

But some have ESC issues and when they post about it - Moderators give them a PM with a download link to the 30 version ....

I commented that I thought this to be bad policy. Many owners of P3 do not join this forum, so how many out there have ESC / other problems and do not know of a patched FW to fix it ? If the 30 FW is only for patching problems - then why not have a link on the website - but with plain warning - it is purely IF you have ESC problem ? To use the 20 version normally.

Fell on deaf ears .....

Nigel
2018-1-25
Use props
Chris_A
Second Officer
Flight distance : 6142 ft
United Kingdom
Offline

Hi Nigel, yeah, I'm getting that impression also. I'll stick with the v1.11.20 version until the need arises (hopefully it won't).

BR

Chris
2018-1-25
Use props
Anderson_Araujo
lvl.1
Flight distance : 121345 ft
Brazil
Offline

Hi All

Anyone can share with me the firmware (v1.11.30) ?
My P3A is showing the message: "ESC STATUS ERROR"

Please?


2018-1-25
Use props
solentlife
Captain
Flight distance : 1087530 ft
Latvia
Offline

You need to ask Moderators to link for you ...

Its a TOP SECRET FW issue !! seriously ....

Nigel
2018-1-25
Use props
KedDK
Captain
Flight distance : 1133038 ft
Denmark
Offline

solentlife Posted at 2018-1-25 07:48
You need to ask Moderators to link for you ...

Its a TOP SECRET FW issue !! seriously ....

"a TOP SECRET FW issue"
No only the solution to fix it ...
2018-1-25
Use props
Chris_A
Second Officer
Flight distance : 6142 ft
United Kingdom
Offline

Conspiracy theory #1: The v1.11.30 firmware will allow the North Koreans to spy on the surrounding area in readiness to launch a global attack using updated drones.
2018-1-25
Use props
DJI Susan
Administrator

Offline

Hey Chris, this V1.11.30 only fix the ESC error after upgrading the firmware which may affect a certain of drones. No need to get this if your drone works well. Also, this will not affect the warranty, no worries.  
2018-1-26
Use props
DJI Susan
Administrator

Offline

Anderson_Araujo Posted at 2018-1-25 06:04
Hi All

Anyone can share with me the firmware (v1.11.30) ?

Anderson, I've received and replied your message in PM, please check and try later.
2018-1-26
Use props
Chris_A
Second Officer
Flight distance : 6142 ft
United Kingdom
Offline

DJI Susan Posted at 2018-1-26 00:00
Hey Chris, this V1.11.30 only fix the ESC error after upgrading the firmware which may affect a certain of drones. No need to get this if your drone works well. Also, this will not affect the warranty, no worries.

Thanks DJI Susan
2018-1-26
Use props
fans0a0ee07d
lvl.2
Spain
Offline

DJI Susan Posted at 2018-1-26 00:04
Anderson, I've received and replied your message in PM, please check and try later.

Hi! I have the same issue with ESC error, can you send me 1.11.30 link please? I tried everything...
2018-1-28
Use props
Marben
lvl.1

Norway
Offline

I have also got the ESC status error after upgrading to 1.11.20. And from reading a numerous of forums about the issue it seems like drones are dropping like flies since this update was released. I just bought my first drone(P3P) thogether with my son. I turned everything on according to the manual and of course also updated everything as the app suggested. And as you already figured out I’m left with a piece of plastic with a movable camera that won’t fly. You can only  imagine my sons disappointment
2018-1-28
Use props
Chris_A
Second Officer
Flight distance : 6142 ft
United Kingdom
Offline

Marben Posted at 2018-1-28 23:28
I have also got the ESC status error after upgrading to 1.11.20. And from reading a numerous of forums about the issue it seems like drones are dropping like flies since this update was released. I just bought my first drone(P3P) thogether with my son. I turned everything on according to the manual and of course also updated everything as the app suggested. And as you already figured out I’m left with a piece of plastic with a movable camera that won’t fly. You can only  imagine my sons disappointment

Jump onto DJI's online chat, they will assist you
2018-1-29
Use props
solentlife
Captain
Flight distance : 1087530 ft
Latvia
Offline

I still don't understand the need to keep this 'fix' of the general downloads ................

Nigel
2018-1-29
Use props
Marben
lvl.1

Norway
Offline

Chris_A Posted at 2018-1-29 00:28
Jump onto DJI's online chat, they will assist you

Tried that, was of no help at all, only stated the obvious... have you tried this and that bla bla bla... until he finally directed me to the support email, so I'm trying that now...
2018-1-29
Use props
DJI Susan
Administrator

Offline

fans0a0ee07d Posted at 2018-1-28 11:18
Hi! I have the same issue with ESC error, can you send me 1.11.30 link please? I tried everything...

Sorry for the late response. I've PMed you the download link, please check later.
2018-2-1
Use props
DJI Susan
Administrator

Offline

Marben Posted at 2018-1-28 23:28
I have also got the ESC status error after upgrading to 1.11.20. And from reading a numerous of forums about the issue it seems like drones are dropping like flies since this update was released. I just bought my first drone(P3P) thogether with my son. I turned everything on according to the manual and of course also updated everything as the app suggested. And as you already figured out I’m left with a piece of plastic with a movable camera that won’t fly. You can only  imagine my sons disappointment

Marben, I feel the pain, sorry about this. Please check the message in PM and see whether it works.
2018-2-1
Use props
djiuser_Fr4eCT7IL4HB
lvl.1
Flight distance : 89 ft

Chile
Offline

Hola a todos, soy nob en el foro y como dicen, muchos no llegamos acà... mi phantom 3 ad pierde señal de video constantemente, incluso a menos de 1 mt  (antes de actualizar rc 1.9.2 y el pajaro a 1.11.20 no tenia problemas a 4000 mts!) uso galaxy S6 y ipad mini 2 estos funcionaban perfecto, degrade ios 11.2.5 hasta llegar a 11.2 (mas no puedo) y Dji Go logre degradar desde v3.1.26 v3.1.24 y finalmente v3.1.23 mejorando un poco en esta ultima hasta los 2000mts luego pierdo señal de video... de verdad ya no se que hacer, si tirar a la basura el ipad o el drone. Degradar el pajaro seria la ultima alternativa ya que los srs de Dji nunca responieron mis mail y yo sin saber que hacer... si alguien puede confirmar cual es la version anterior a 1.11.20 y la que le corresponda al RC se los agradeceria. En cuanto al tema principal v30 para mi es solo humo, ya que lo que creo es que han ido quitando caracteristicas a la serie P3 para reforzar las ventas de los P4 asi de simple. Y ahora con 8 canales!! Dji una verguenza, creo que estaria feliz con un Xiaomin mi Drone (me arrepiento de haberme metido con Dji)
2018-2-1
Use props
Daren Hatch
New

United States
Offline

I am also one who updated to v1.11.20 two days ago on my P3A, and now also get the ESC Error that I've never had before. Can I get a link to the v1.11.30 as well? I contacted tech support who told me to send it in. I'd rather not, if this will fix it. Thanks!
2018-4-23
Use props
fans507e6b68
lvl.2
Flight distance : 2169 ft
United States
Offline

Hello
I am having the ESC Error issue after upgrading my P3A to v1.11.20.  Please send me the link to the firmware fix for this.
Cheers,
Jim
2018-4-25
Use props
Martcrop
lvl.2
United Kingdom
Offline

I am also having the ESC Error issue after upgrading my P3A to v1.11.20. Could I also have the link to the firmware fix?
Regards, Martin
2018-4-29
Use props
Martcrop
lvl.2
United Kingdom
Offline

Martcrop Posted at 2018-4-29 10:40
I am also having the ESC Error issue after upgrading my P3A to v1.11.20. Could I also have the link to the firmware fix?
Regards, Martin

As stated I also have the ESC status error showing now after 1.11.20 update. Aircraft has not crashed no hard knocks but haven't flown it since update and now when turning aircraft on get this message. Please please help me.
2018-5-4
Use props
LCDYLE
lvl.1
Flight distance : 43632 ft
United States
Offline

I have to join the chorus and ask Administrator "DJI Susan" to please send me the 1.11.30 Firmware update.

I downloaded the 1.11.20 update two days ago (May 9th 2018), and after two and half years of nearly perfect operation of my P3A, I received the famous "ESC error" when tried a CSC start.

I spend THREE hours on the phone last night with two different DJI Technical team members.  Neither of them knew about the 1.11.30 patch to fix the "ESC Error"  Total waste of time.

PLEASE please send me the 1.11.30 Firmware update to eliminate this "ESC Error"
2018-5-11
Use props
LCDYLE
lvl.1
Flight distance : 43632 ft
United States
Offline

DJI Susan Posted at 2018-2-1 01:34
Marben, I feel the pain, sorry about this. Please check the message in PM and see whether it works.

I have to join the chorus and ask Administrator "DJI Susan" to please send me the 1.11.30 Firmware update.

I downloaded the 1.11.20 update two days ago (May 9th 2018), and after two and half years of nearly perfect operation of my P3A, I received the famous "ESC error" when tried a CSC start.

I spend THREE hours on the phone last night with two different DJI Technical team members.  Neither of them knew about the 1.11.30 patch to fix the "ESC Error"  Total waste of time.

PLEASE please send me the 1.11.30 Firmware update to eliminate this "ESC Error"
2018-5-11
Use props
DJI Diana
Administrator
Flight distance : 2408 ft

Offline

LCDYLE Posted at 2018-5-11 03:17
I have to join the chorus and ask Administrator "DJI Susan" to please send me the 1.11.30 Firmware update.

I downloaded the 1.11.20 update two days ago (May 9th 2018), and after two and half years of nearly perfect operation of my P3A, I received the famous "ESC error" when tried a CSC start.

Hi, I'm sorry to hear about the issue that you are experiencing. I have sent the bin file to you via PM, please go to check it. Hope everything will be fine soon. Thanks!
2018-5-12
Use props
DJI Diana
Administrator
Flight distance : 2408 ft

Offline

Martcrop Posted at 2018-5-4 15:10
As stated I also have the ESC status error showing now after 1.11.20 update. Aircraft has not crashed no hard knocks but haven't flown it since update and now when turning aircraft on get this message. Please please help me.

Hi Martcrop, sorry to reply you late. The bin file has been sent to you via PM, please go to check it, if there is any further issue, please feel free to let us know, we'll here for help.
2018-5-12
Use props
DJI Diana
Administrator
Flight distance : 2408 ft

Offline

fans507e6b68 Posted at 2018-4-25 05:33
Hello
I am having the ESC Error issue after upgrading my P3A to v1.11.20.  Please send me the link to the firmware fix for this.
Cheers,

Hi Jim, sorry to reply you late. The bin file has been sent to you via PM, please go to check it, if there is any further issue, please feel free to let us know, we'll here for help.
2018-5-12
Use props
DJI Diana
Administrator
Flight distance : 2408 ft

Offline

Daren Hatch Posted at 2018-4-23 12:18
I am also one who updated to v1.11.20 two days ago on my P3A, and now also get the ESC Error that I've never had before. Can I get a link to the v1.11.30 as well? I contacted tech support who told me to send it in. I'd rather not, if this will fix it. Thanks!

Hi, so sorry to reply you late. May I confirm that have you solved the issue or not? If not, let me share the bin file to you, thanks!
2018-5-12
Use props
djiuser_kprZbIUlvuvI
New

United States
Offline

i updated the firmware a couple days ago on my p3p i need to use my drone soon but I've been grounded since an esc status error. please send me a link that will help, thanks
2018-7-2
Use props
djiuser_kprZbIUlvuvI
New

United States
Offline

i need dji susan
2018-7-2
Use props
solentlife
Captain
Flight distance : 1087530 ft
Latvia
Offline

WHY is DJI not making this available to download ? If it has only an ESC fix in it ... why is it kept secret ??

nigel
2018-7-3
Use props
bigster
lvl.2

United States
Offline

I'm also having this problem with a Phantom 3 Pro.  @DJI Diana, could you please send me the file?

Thank you!
Mark
2018-9-24
Use props
Chris_A
Second Officer
Flight distance : 6142 ft
United Kingdom
Offline

solentlife Posted at 2018-7-3 02:34
WHY is DJI not making this available to download ? If it has only an ESC fix in it ... why is it kept secret ??

nigel

I'm guessing this is an 'unofficial' release.
2018-10-1
Use props
MCh26
lvl.1

Bangladesh
Offline

I'm having ESC error with my Phantom 3 Professional. Current firmware is 1.11.20. Pls help!!
2018-10-4
Use props
KenDuke
Second Officer
Flight distance : 50837 ft
United States
Offline

Wonder if this will also update the firmware in the RC, that is causing a lot of us to loose gimbal control from the remote.  
2018-10-13
Use props
wasatch1000
lvl.2
Flight distance : 2750774 ft
  • >>>
United States
Offline

DJI Susan Posted at 2018-2-1 01:34
Marben, I feel the pain, sorry about this. Please check the message in PM and see whether it works.

Hi, updated P3 Professional, now experiencing the ESC error.  May I please have a link to the v1.11.30 file.  Thank you.
2018-10-26
Use props
DJI Susan
Administrator

Offline

wasatch1000 Posted at 2018-10-26 19:52
Hi, updated P3 Professional, now experiencing the ESC error.  May I please have a link to the v1.11.30 file.  Thank you.

Hi wasatch1000, sorry for the late response. I've read your message in PM and responded as well, please kindly check later, thanks!
2018-10-27
Use props
DJI Susan
Administrator

Offline

KenDuke Posted at 2018-10-13 14:37
Wonder if this will also update the firmware in the RC, that is causing a lot of us to loose gimbal control from the remote.

Hi KenDuke, may I have more details about the loose gimbal control from the remote? Does the aircraft and RC link well? What's the current firmware version of the aircraft and RC?
2018-10-27
Use props
DJI Susan
Administrator

Offline

MCh26 Posted at 2018-10-4 10:34
I'm having ESC error with my Phantom 3 Professional. Current firmware is 1.11.20. Pls help!!

Hi MCh26, I've sent you a message in PM, please kindly check later. If there is anything else we can help, please kindly click the reply button under one's message so that we can get the notification and handle it timely, thanks!
2018-10-27
Use props
123Next >
Advanced
You need to log in before you can reply Login | Register now

Credit Rules