Please select Into the mobile phone version | Continue to access the computer ver.
Connection problems
349 4 2018-1-27
Uploading and Loding Picture ...(0/1)
o(^-^)o
oam
lvl.1
Germany
Offline

After the update to version V01.04.0200 my RC won't no longer connect to the Mavic. "Connecting" is flashing on the RC all the time. This was also during the update of the RC.  Instead of "Updating" only "Connecting" was flashing. Downgrading doesn't help, same problem. "Reset factory setting" doesn't work. If I try an error occurs "not possible".
Connecting via wifi works without any difficulty. Therefore I think the problem is the RC. Is there anything I can do?
thx
oam


2018-1-27
Use props
Suren
Captain
Flight distance : 8219337 ft
  • >>>
South Africa
Offline

you will need to bind the remote back to AC. open the flap where the memory card sits and you will see a small button there that you will need to press with a tooth pick, first open the go4 app and go to the remote settings there you will see Linking Remote Controller, select that and the process should begin.
2018-1-27
Use props
Macdugel
First Officer
Flight distance : 630577 ft
United States
Offline

As Suren said - binding the controller again with your Mavic is necessary.  
2018-1-27
Use props
oam
lvl.1
Germany
Offline

"Binding" was the key word. It worked.
Thank you for your fast help
2018-1-27
Use props
DJI Diana
Administrator
Flight distance : 2408 ft

Offline

oam Posted at 2018-1-27 07:02
"Binding" was the key word. It worked.
Thank you for your fast help

Glad to hear this, hope you enjoy the drone, fly safe!
2018-1-28
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules