Please select Into the mobile phone version | Continue to access the computer ver.
Inspire 1 pro won't connect to the app
4052 13 2018-1-27
Uploading and Loding Picture ...(0/1)
o(^-^)o
fans1099041f
lvl.1
United States
Offline

Hi there,

I've never experienced any issues with my drone before today. I turn it on before a video shoot I have to make today at 2 and the RC wont connect to the app. It shows as a new device and shows the "how to connect" button.

I cant rebind the controller since the app is not detecting a device.

DJI care for the states works on business hours.

Any help is appreciated.

Thanks!
2018-1-27
Use props
TruGreen
Captain
Flight distance : 527297 ft
  • >>>
United States
Offline

try the simple first, swap the USB cable, if that dont do it, try swapping tablet for phone
2018-1-27
Use props
KeithM6
lvl.3
Flight distance : 161850 ft
  • >>>
United States
Offline

Read this page to see if it applies to your situation:

https://forum.dji.com/thread-131074-1-1.html
2018-1-27
Use props
fans1099041f
lvl.1
United States
Offline

TruGreen Posted at 2018-1-27 08:11
try the simple first, swap the USB cable, if that dont do it, try swapping tablet for phone

Thanks for the reply. I did tried from iPad to iPhone, different cords, reinstalling app.

Nothing.

Note: I turned it on after the firmware update and everything was working great.
2018-1-27
Use props
fans1099041f
lvl.1
United States
Offline

KeithM6 Posted at 2018-1-27 08:22
Read this page to see if it applies to your situation:

https://forum.dji.com/thread-131074-1-1.html

Thank you very much. That is exactly the issue.

I appreciate the finding.
2018-1-27
Use props
TruGreen
Captain
Flight distance : 527297 ft
  • >>>
United States
Offline

did you upgrade your ipad and iphone to the latest IOS?
2018-1-27
Use props
fans1099041f
lvl.1
United States
Offline

KeithM6 Posted at 2018-1-27 08:22
Read this page to see if it applies to your situation:

https://forum.dji.com/thread-131074-1-1.html

Thank you very much!

Thats exactly my issue.

I appreciate the finding.
2018-1-27
Use props
DJI Elektra
Administrator
China
Offline

fans1099041f Posted at 2018-1-27 08:22
Thanks for the reply. I did tried from iPad to iPhone, different cords, reinstalling app.

Nothing.

Sir, I think the USB port of your RC goes wrong, please contact our support and start a case: http://www.dji.com/support. Thanks for your support.
2018-1-27
Use props
fans1099041f
lvl.1
United States
Offline

KeithM6 Posted at 2018-1-27 08:22
Read this page to see if it applies to your situation:

https://forum.dji.com/thread-131074-1-1.html

It looks like the solution from DJI is to have you roll back to the previous iOS firmware.

I just got out of the chat with them.

What if Apple closes the window for the rollback?
2018-1-29
Use props
fans1099041f
lvl.1
United States
Offline

KeithM6 Posted at 2018-1-27 08:22
Read this page to see if it applies to your situation:

https://forum.dji.com/thread-131074-1-1.html

the update for the dji go app is out and the problem is fixed.
2018-1-30
Use props
fans440de3fc
New

United States
Offline

fans1099041f Posted at 2018-1-30 05:16
the update for the dji go app is out and the problem is fixed.

HOW DID YOU RESOLVE THIS ISSUE?
2019-1-30
Use props
fans440de3fc
New

United States
Offline

fans1099041f Posted at 2018-1-30 05:16
the update for the dji go app is out and the problem is fixed.

HOW DID YOU RESOLVE THIS ISSUE?
2019-1-30
Use props
JWSky81
lvl.1
Flight distance : 1457041 ft
United States
Offline

Yes, I'm experiencing the same thing with my Inspire 1 RC. My iPhone(s), iPad won't connect. The remote will connect with the aircraft and control the gimble, but when I connect my iPhone to the remote the DJI GO app does not recognize the remote. I've tried: replacing the cable with various new Apple cable, closing the app, reinstalling the app, using devices with the lastest 12.3.1 iOS older 10.3.3 iOS, and ending tried replacing the HDMI board.

The remote has an older firmware "V01.02.1.06_en", I tried installing the "V01.11.01.50" but it would not recognize the .bin file.

I've spent days reading through forum posts and watching videos and have begun to believe that this issue has not been solved by DJI. Is there anything else I can try before sending my remote to be serviced?
2019-5-27
Use props
johnjcmurray.com
lvl.1
United Kingdom
Offline

JWSky81 Posted at 2019-5-27 21:28
Yes, I'm experiencing the same thing with my Inspire 1 RC. My iPhone(s), iPad won't connect. The remote will connect with the aircraft and control the gimble, but when I connect my iPhone to the remote the DJI GO app does not recognize the remote. I've tried: replacing the cable with various new Apple cable, closing the app, reinstalling the app, using devices with the lastest 12.3.1 iOS older 10.3.3 iOS, and ending tried replacing the HDMI board.

The remote has an older firmware "V01.02.1.06_en", I tried installing the "V01.11.01.50" but it would not recognize the .bin file.

I’m having the exact same issue as you. Tried iPhone, iPad, different iOS versions, android. Nothing. It seems DJI are the apple of the drone industry. The inspire 1 is too old now so they don’t care or support!
5-9 17:13
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules