Please select Into the mobile phone version | Continue to access the computer ver.
Inspire 1 v2 verification
1360 18 2018-2-1
Uploading and Loding Picture ...(0/1)
o(^-^)o
Peter W Bennett
lvl.1

United States
Offline

Does anyone know for sure that this serial number is an Inspire 1 v2 ?  W13DCK11050653
IMG_5085.JPG
2018-2-1
Use props
TruGreen
Captain
Flight distance : 511083 ft
  • >>>
United States
Offline

I'm unsure how to decode the serial number but whats the rest of the bird look like? What concerns you to think it may/may not be V2?
2018-2-1
Use props
Peter W Bennett
lvl.1

United States
Offline

TruGreen Posted at 2018-2-1 09:05
I'm unsure how to decode the serial number but whats the rest of the bird look like? What concerns you to think it may/may not be V2?

inside the battery compartment reads inspire 1 t600, yet seller states it's a v2.  serial number should verifiy if it v1 or v2
2018-2-1
Use props
TruGreen
Captain
Flight distance : 511083 ft
  • >>>
United States
Offline

Peter W Bennett Posted at 2018-2-1 09:27
inside the battery compartment reads inspire 1 t600, yet seller states it's a v2.  serial number should verifiy if it v1 or v2

ive read some early model V2s still had the T600 the FCC ID should also end in 1510, but again some early V2 still had the old 1410 stickers in the battery tray.
2018-2-1
Use props
Peter W Bennett
lvl.1

United States
Offline

TruGreen Posted at 2018-2-1 09:41
ive read some early model V2s still had the T600 the FCC ID should also end in 1510, but again some early V2 still had the old 1410 stickers in the battery tray.

I read that too, hoping its a v2.  sent copy of s/n with photo to dji for verification
2018-2-1
Use props
TruGreen
Captain
Flight distance : 511083 ft
  • >>>
United States
Offline

Peter W Bennett Posted at 2018-2-1 10:22
I read that too, hoping its a v2.  sent copy of s/n with photo to dji for verification

it should have 3510H on the top edge of the motors, an the x5 vibration board. otherwise theres not really much of a difference beside the carbon fiber pattern between the two
2018-2-1
Use props
Daroga
Captain
Flight distance : 3517287 ft
  • >>>
United States
Offline

W13DCK11050653 was built 1 Dec 2015 -> so says DJI Serial Decoder

My Inspire 1 Pro (v2) likewise has the original T600 model but is a V2 from DJI ordered in early Jan 2016.
Mine was supposedly built 2 Dec 2015 for what it's worth ;-)

2018-2-2
Use props
DTK
Second Officer
Flight distance : 1943159 ft
United States
Offline

There are v1 upgraded to v2. I have done so for mine. So it really is not whether it is a real v2. Does it have every bits that qualify as v2.
2018-2-2
Use props
TruGreen
Captain
Flight distance : 511083 ft
  • >>>
United States
Offline

Daroga Posted at 2018-2-2 20:18
W13DCK11050653 was built 1 Dec 2015 -> so says DJI Serial Decoder

My Inspire 1 Pro (v2) likewise has the original T600 model but is a V2 from DJI ordered in early Jan 2016.

I just checked my I1 V2 Black Edition serial on there and it too said Built 0 Dec 2015.  and mine has the new style CF arms, V2.0 T601 and FCC ID 1510

but likewise i built a V2 clone and its serial number says 1 Oct 2015
Curious too my V2 serial starts with W21AC, where my other 4 that I've owned started with W13DC.... you think that W1 could be a version one? and W2 is version 2 serial? cause i know for a fact my other 4 are all V1. How does your V2 serial start??
2018-2-2
Use props
DJI Mindy
Administrator
Flight distance : 7 ft
Offline

Hi Peter, I checked the serial number in our system and it is Inspire 1 V2.0 .
2018-2-2
Use props
Daroga
Captain
Flight distance : 3517287 ft
  • >>>
United States
Offline

TruGreen Posted at 2018-2-2 20:51
I just checked my I1 V2 Black Edition serial on there and it too said Built 0 Dec 2015.  and mine has the new style CF arms, V2.0 T601 and FCC ID 1510

but likewise i built a V2 clone and its serial number says 1 Oct 2015

You may be on to something there -> mine is W21AC also! Thanks for the info.

I do believe that DJI initiated the v2 producton by retrofitting some of their v1 inventory so if we're correct, there will still be some W13 v2s out there....
2018-2-3
Use props
TruGreen
Captain
Flight distance : 511083 ft
  • >>>
United States
Offline

Daroga Posted at 2018-2-3 18:19
You may be on to something there -> mine is W21AC also! Thanks for the info.

I do believe that DJI initiated the v2 producton by retrofitting some of their v1 inventory so if we're correct, there will still be some W13 v2s out there....

yea just found it odd and makes sense
2018-2-3
Use props
andrew roy
lvl.3
Flight distance : 414042 ft
United Kingdom
Offline

mine is a w13 built on 2 december 2015 but has all the v2 fixtures ie: motors x5 bracket
2018-2-5
Use props
Mrothart
lvl.4
United States
Offline

I'd be cautious with what DJI says. Those serial numbers are stickers and easily removed and placed on any unit.

For instance, I sent in a Version 2 drone for repair and was sent a Version 1 inspire, where they removed the S/N off my crashed drone and stuck it on this refurbished unit and claimed it to be a Version 2.0.
2018-2-5
Use props
djiuser_OJLQMtxQEdnV
lvl.1
Norway
Offline

I bought a second hand Inspire 1 V2, and someone is telling me it is an V1, can someone check the serial to confirm or deny it is a V2? Production date was 2 December 2015, it has the older carbon fiber pattern, Quick release props.. Serial is
W13DCD21030762. Thank you in advance
2018-12-18
Use props
A CW
Captain
Flight distance : 11526437 ft
  • >>>
United Kingdom
Offline

Go onto the official DJI store TODAY and purchase a brand new Inspire 1 V2.0 - it will be a T600 model! I bought mine brand new from an authorised dealer here in the UK in July this year and it's a T600 too - the V2.0 icon shows on my profile on here. The drone has the X5 gimbal vibration board, 3510H motors, 1345T props and V2.0 written on the stickers on the case.  
2018-12-18
Use props
A CW
Captain
Flight distance : 11526437 ft
  • >>>
United Kingdom
Offline

This is what a brand new T600 V2.0 looks like
2018-12-18
Use props
matthewbymg
lvl.2
United Kingdom
Offline

Having owned many Inspire V1 and V2's (around 20) I can confirm that it is close to impossible to actually verify anything for sure. I believe that the V2 was a knee jerk reaction by DJI when sales started to lag slightly. They did small internal upgrades throughout the life of the Inspire 1. Some people refer to this as Version A B and C.

These are the ways that some people report on being able to tell... All are incorrect because they are followed by 'sometimes'
They printed the letter H on top of the motors - (this is true for the very later models but not the earlier models)
They printed 'T601' in the battery tray - This for sure is a V2 but it doesn't mean if you have a T600 this is NOT a V2, as they only did this at the end of the production run.
The old camo style of carbon fibre as opposed to cross stitch. - DJI confirmed they used all three types throughout their production run.
The writing on top of the motors.... This was changed during the first quick release propellor mount release - If you have these as standard then you've got a V1
The motors look identical from the outside. in shape. The newer propellor mount makes the motors look deeper but take the propellor mount off and they are the same.

Back in the day, I bought a Phantom 2 Vision 3. They said it had bigger better motors in it but it turned out they had fitted the stronger motors to the original ESC boards with thinner wires... A disaster waiting to happen.

Having flown many Inspire 1 V1 and V2's side by side I can confirm that 99% of people would have no idea what they are flying. Neither one was noticeably faster than the other side by side...  The only model that was really worked on was the T601 State side as that had higher output levels between the remote and the video link.

Don't forget, In 2015, this technology was really quite in it's youth still... The Inspire, whichever version you own is a fantastic machine. I have never had any of the units fail on me. They are like an old landrover... They aren't the fastest drone out there but they will keep on and on going...
4-20 02:15
Use props
mixchief
First Officer
Flight distance : 160646 ft
United States
Offline

The baseplate of the battery compartment on mine is printed not stickered and clearly states in the upper right hand corner Inspire 1 V2.0 Model T601
4-22 08:59
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules