I just updated to the new firmware on the inspire and at the same time updated the Tab 4. For some reason when I connect the tab to the controller, I don't see any video feed. It says no signal, but I can control the camera still take pictures and still roll video. It worked before the updates. Has anyone else having this particular problem? I have connected other devices to the controller and they seem to work just fine. Video signal and everything.

Did you update the remote?    If you didn't then it would act as you describe, being able to move the camera and roll but not see an image.

Also, because it says NO SIGNAL, that's a BIG clue.

If you're using the same SD for both the Inspire and remote, you need to delete the TXT file it generates in between.

Did a full update on both. I have 2 other tablets that work, but for some reason the Tab 4 just won't get a picture.

video signal don't word with android 4.4.2 (test on 2 tab), But test with 2 tab android 4.4.4, work well.

gmaiche Posted at 2015-4-30 04:42
video signal don't word with android 4.4.2 (test on 2 tab), But test with 2 tab android 4.4.4, work  ...

Why was I able to use the Tab 4 a few weeks ago?

gmaiche Posted at 2015-4-30 04:42
video signal don't word with android 4.4.2 (test on 2 tab), But test with 2 tab android 4.4.4, work  ...

It also works with my phone which is an S4 with 4.4.2

DePrima Pro Posted at 2015-4-30 12:05
It also works with my phone which is an S4 with 4.4.2

I tested my camera on another INSPIRE1, and we have a video image. Aim only on android tablet version 4.4.4 (tested on 2 tablet android 4.4.4). However, there is no video image on tablet android 4.4.2 (tested on 2 tablets android 4.4.2). We also tested on iPad, and we do have a video image.
So we deduce that my camera works (only on another inspiring 1).

We tested my camera on my INSPIRE1 but this time there is no video image or signal on android 4.4.4 tablet, 4.4.2 and iPad.

We believe that the problem comes from elsewhere, yet the log file says "[00022100] [15 00] device not detected" and it looks like
a camera problem.
Can you confirm me, that this line (in log file) mean camera undetected ?

Just updated bird and remotes. No video to Samsung Tab 4 with 4.4.2 also. Any solutions yet?

easiair05@aol.c Posted at 2015-5-2 04:38
Just updated bird and remotes. No video to Samsung Tab 4 with 4.4.2 also. Any solutions yet?

Nothing yet :/

Updated to new firmware today and android app off dji website and now the video returns to my tab4 7. go figure.

Can others confirm the firmware from the DJI site as of today (Inspire 1 Firmware v1.2.1.03)  fixes video on Samsung Tab tablets?