hi,

any advice/input on using the shutter port on the n3? i've assigned f2 to "shutter" and connected it to my camera via a cable made for the purpose (http://www.rcshutter.com/index.p ... 0&product_id=94)

nothing at all happens when i press c2. i tried 50 and 400 and experimented with the pulse settings a bit.

i wonder if it's because the adapter is designed for a 3 position stick?

thanks!

helloooooooooooooo? anyone from DJI?

What camera, what product, what’s your flight controller, Lightbridge?

it's OK, i solved that particular problem.

for reference, S900 + E1200 + N3 + LB2 + gremsy t3 gimbal and nikon d850 camera.

the problem was that the F2 is only outputting PWM, not 5v. when i added 5v the shutter works.

sftmthd Posted at 2018-2-10 20:08
it's OK, i solved that particular problem.

for reference, S900 + E1200 + N3 + LB2 + gremsy t3 gimbal and nikon d850 camera.

where you aded the 5V ?
will it work for a D810 ?

thnx

In the A3 / N3 controllers on the 3pin outputs F1-F8, all GND outputs are on the same bus and VCC are also on the same bus.
And only signal pins - separately.
In default VCC pin not have power.
It is enough to provide power submit to any pin VCC + 5v from any UBEC so that all outputs F1-F8 appeared power

Is possible to shutter a Sony camera from N3 using dji GS Pro?
If not... How could i do it?

Nakadrone Posted at 2018-9-28 09:45
Is possible to shutter a Sony camera from N3 using dji GS Pro?
If not... How could i do it?

A regular way cannot make it work. Maybe you can check whether SDK can realize it.

sftmthd Posted at 2018-2-10 20:08
it's OK, i solved that particular problem.

for reference, S900 + E1200 + N3 + LB2 + gremsy t3 gimbal and nikon d850 camera.

Hi I have m600 pro and ronin mx plus d800 for still can you explain what i need to buy and how to fix for a newbie. I don't mind throwing you some money just want an easy explained way to remote shutter the d800.

Many thanks in advance Scott