Please select Into the mobile phone version | Continue to access the computer ver.
P2V+ GPS and Compass
778 0 2014-10-28
Uploading and Loding Picture ...(0/1)

United States

   I removed the compass on my P2V+ so that I could paint the landing gear.  It's back on now and I don't get any errors on the assistant software or the app.  I often have trouble getting 6 satellites (different issue I'm preparing to address), but today I was getting 6-7 and there was considerable drift in moderate (7-10mph) in NAZA GPS mode.  I always set the compass before every flight.  Also, the only screwdriver I had small enough for the phillips on the compass mount is magnetized.  However all of my readings in the software are in the typical ranges, +- 300 x y z and then like 1400 mod.  

Any advice is greatly appreciated.


PS- DJI, would it void my warranty to cover my GPS in copper tin?  It's a known design flaw in which the wifi negatively affects the GPS.  However to correct said flaw, it requires opening the body.  Please advise.
Use props
You need to log in before you can reply Login | Register now

Credit Rules