Hello everybody,
i'm slowly trying to fix problems occurred after a recent firmware update.
I have 3 main issues (please check the video):

1) If the thumb controller is on, i cannot set any speed value for smoothtrack pan/tilt or roll...even the speed tests in the app runs always at full speed independently from the vaue set. If i turn off the thumb controller everithing gets back to normal.
2) Smoothtrack pans and tilts have a strong bounce effect at the end of the movement if the motor stiffness is set around 40 (my camera is an Ursa Mini Pro =4kg approx.)
3) If I set the motor stiffness up to 70, the "bounce" is no longer there (almost), but the end of the smoothtrack movement is abrupted. There's no ramping down to a stop. It ends pretty much all of a sudden.

I already tried resetting to factory defaults.
Any help?

reference video

Hello everybody,
i'm slowly trying to fix problems occurred after a recent firmware update.
I have 3 main issues (please check the video):

1) If the thumb controller is on, i cannot set any speed value for smoothtrack pan/tilt or roll...even the speed tests in the app runs always at full speed independently from the vaue set. If i turn off the thumb controller everithing gets back to normal.
2) Smoothtrack pans and tilts have a strong bounce effect at the end of the movement if the motor stiffness is set around 40 (my camera is an Ursa Mini Pro =4kg approx.)
3) If I set the motor stiffness up to 70, the "bounce" is no longer there (almost), but the end of the smoothtrack movement is abrupted. There's no ramping down to a stop. It ends pretty much all of a sudden.

I already tried resetting to factory defaults.
Any help?

reference video