Ocusync Groundstation?
5731 9 2018-2-28
Uploading and Loding Picture ...(0/1)
o(^-^)o
Kryml Munsta
lvl.4
Flight distance : 185262 ft
  • >>>
Germany
Offline

DJI, any chance that there will be an Ocusync-Groundstation with HDMI-out available sometime in the future?

In my opinion this would be a perfekt addition to the Ocusync System.
2018-2-28
Use props
Keule
Second Officer
Flight distance : 3733015 ft
  • >>>
United Kingdom
Offline

I can think of using a Crystal Sky monitor.
This one provides HDMI out.

So you can setup easily your own ground station.
2018-2-28
Use props
Kryml Munsta
lvl.4
Flight distance : 185262 ft
  • >>>
Germany
Offline

Yes, if you are flying Mavic Pro

But i was more thinking of Ocusync Air Unit
2018-2-28
Use props
DJI-Mark
Second Officer

United States
Offline

Here are some products that are compatible with the Groundstation Pro: GS Pro is compatible with the following DJI aerial platforms and flight controllers:
Phantom 3 Standard/4K/Advanced/Professional, Phantom 4/Pro/Advanced, Inspire 1/Inspire 2
Matrice 100/600/600 Pro/200, A3, N3
Compatible cameras: Phantom 3 Standard/4K/Advanced/Professional, Phantom 4/Pro, and
Zenmuse X3, X5, X5R, X4S, X5S, Z3, Z30, and XT.

2018-2-28
Use props
Keule
Second Officer
Flight distance : 3733015 ft
  • >>>
United Kingdom
Offline

As the Air unit can also be linked to a Mavic RC, a second user can also view the pilot’s FPV from the Crystal Sky (and further on to any HDMI target)
The Air Unit can be linked with up to 2 Goggles RE or 1 RC.
2018-2-28
Use props
Kryml Munsta
lvl.4
Flight distance : 185262 ft
  • >>>
Germany
Offline

Yes, Keule - but for FPV it's all about latency.
Mavic Controller + Crystal Sky Monitor + HDMI-out will add lot of Video latency.
I thinking Ocusync Air System could become a good option for digital FPV, if you could use additional googles and connect them directly to an Ocusync-Receiver (Groundstation) with Low latency
2018-3-2
Use props
Keule
Second Officer
Flight distance : 3733015 ft
  • >>>
Germany
Offline

Kryml Munsta Posted at 2018-3-2 01:27
Yes, Keule - but for FPV it's all about latency.
Mavic Controller + Crystal Sky Monitor + HDMI-out will add lot of Video latency.
I thinking Ocusync Air System could become a good option for digital FPV, if you could use additional googles and connect them directly to an Ocusync-Receiver (Groundstation) with Low latency

All right, understood.
That's why i am using this: Pro Sight
2018-3-2
Use props
Kryml Munsta
lvl.4
Flight distance : 185262 ft
  • >>>
Germany
Offline

... me, too - for race-quads.
But for my fpv-wing i prever the Ocusync system because of it's range.
2018-3-2
Use props
AnzacJack
lvl.4
Flight distance : 3501650 ft
  • >>>
Australia
Offline

I to would be interested in something like this. I have the crystal sky, but this needs to be connected to controller. It is not a receiver in itself like the googles. Ideally, I want a receiver that has hdmi out so I can plug into external monitor, without having to be hardwired into my controller.
2019-3-28
Use props
fans584c8b58
lvl.1
Flight distance : 362352 ft
  • >>>
Finland
Offline

Still waiting oc reveiver with hdmi or sdi output also
2020-12-11
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules