oldgio
lvl.2
Flight distance : 564242 ft
Italy
Offline
|
Hello everyone, I also have a similar problem, I bought used an inspire 1 pro with two cameras, x3 and x5. When I mounted the x3 on another inspire 1 I saw that I had no image return but the camera recorded and moved correctly, I tried inspire 1pro with the same result. At this point I tried to update the FW but after few minutes the update has failed, tried again and again several times with failure and at some point was made as it results from the text of the folder that is created, precise that I used the x3. Result, nothing has changed, always absent image, checking I noticed that I had mistakenly used the FW of the RAW version. I tried to update with correct version for x3 but nothing to do, always interrupted process with failure.
Now I wonder; why this happened, a response certainly comes from the hidden files that tell me that the 0800 and 1500 lines are device not detected I did not make a test, since it is claimed that the transmission card is damaged, I have I put the x3 on an osmo and in this the camera works perfectly even with the image return on the iphone or ipad. At this point how should I proceed to ensure that the inspire 1 pro is correctly updated with the FW, possibly the version previously installed, and resume the x3, also what is the procedure for the correct update of the FW on inspire 1 pro, must use the x5 and the FW for this version and automatically the x3 will be detected, or how did I use the x3 and insert the sd with FW for the pro?
I understand that I have many doubts and I would be grateful if they were clarified
Thank you
Gio
[00016372]========== 2015.08.21 10:17:52. boot(15) ============
[00016488]Packet [C:\WM610_FW_V01.03.00.10.bin] detected, card sn [0xe10390c4].
[00016531]Packet upgrade start...
[00016571]Packet checking...
[00016610]Packet vlink 01.03.0010 <-> 01.02.0000.
[00016679]Done.
[00016721]Version checking[1]...
[00016755][01 00][00] v1.19.3422 -> v1.19.3422
[00016790][01 01][00] v1.19.3422 -> v1.19.3422
[00016854][03 05][00] v34.1.0.5 -> v34.1.0.5
[00016934][03 06][00] v2.2.6.33 -> v2.2.6.33
[00016976][04 00][00] v1.26.0.21 -> v1.26.0.21
[00017034][05 00][00] v3.0.6.1 -> v3.0.6.1
[00017086][08 00][00] v1.14.0.25 -> v1.14.0.25
[00017154][09 00][00] v1.8.0.0 -> v1.8.0.0
[00017214][11 00][00] v3.7.15.9 -> v3.7.15.9
[00017314][12 00][00] v1.8.0.0 -> v1.8.0.0
[00017415][12 01][00] v1.8.0.0 -> v1.8.0.0
[00017513][12 02][00] v1.8.0.0 -> v1.8.0.0
[00017613][12 03][00] v1.8.0.0 -> v1.8.0.0
[00017756][15 00][00] v1.1.2.0 -> v1.1.2.0
[00017814][17 00][00] v1.1.0.4 -> v1.1.0.4
[00017921][17 01][00] v2.0.0.8 -> v2.0.0.8
[00017963][19 00][00] v1.0.8.96 -> v1.0.8.96
[00019998]Packet upgrade cancelled at version checking.
[00004910]========== remo-con disconnect. boot(15) ============
[00004943]Packet [C:\WM610_FW_V01.04.00.10.bin] detected, card sn [0x285019ab].
[00004981]Packet upgrade start...
[00005019]Packet checking...
[00005051]Packet vlink 01.04.0010 <-> 01.03.0000.
[00005090]Record vlink 01.03.0010 <-> 01.02.0000 (flow = 0).
[00005130]Done.
[00005174]Version checking[1]...
[00005224][01 00][00] v1.19.3422 -> v1.19.3422
[00005269][01 01][00] v1.19.3422 -> v1.19.3422
[00005351][03 05][00] v34.1.0.5 -> v34.1.0.5
[00005431][03 06][00] v2.2.6.33 -> v2.3.0.13 need upgrade.
[00005485][04 00][00] v1.26.0.21 -> v1.26.0.21
[00005551][05 00][00] v3.0.6.1 -> v3.0.6.1
[00005598][08 00][00] v1.14.0.25 -> v1.14.0.25
[00005641][09 00][00] v1.8.0.0 -> v1.8.0.0
[00005713][11 00][00] v3.7.1.0 -> v3.7.15.10 need upgrade.
[00005791][12 00][00] v1.8.0.0 -> v1.8.0.0
[00006030][12 01][00] v1.8.0.0 -> v1.8.0.0
[00006130][12 02][00] v1.8.0.0 -> v1.8.0.0
[00006230][12 03][00] v1.8.0.0 -> v1.8.0.0
[00006388][15 00][00] v1.1.2.0 -> v1.1.2.0
[00006450][17 00][00] v1.1.0.4 -> v1.1.0.4
[00006551][17 01][00] v2.0.0.8 -> v2.0.0.8
[00006597][19 00][00] v1.0.8.96 -> v1.0.8.96
[00006632]Done.
[00008669]Waiting for user confirm...
[00018706]Timeout, start upgrade automatically.
[00018784]Firmware upgrading[1]...
[00018991][03 06] Firmware upgrade start...
[00253308][03 06] Firmware upgrade finished successfully.
[00253353][11 00] Firmware upgrade start...
[00334383][11 00] Firmware upgrade finished successfully.
[00334421]Done.
[00334456]Version checking[2]...
[00334491][01 00][00] v1.19.3422 -> v1.19.3422
[00334531][01 01][00] v1.19.3422 -> v1.19.3422
[00334603][03 05][00] v34.1.0.5 -> v34.1.0.5
[00334683][03 06][05] v2.3.0.13 -> v2.3.0.13
[00334765][04 00][00] v1.26.0.21 -> v1.26.0.21
[00334823][05 00][00] v3.0.6.1 -> v3.0.6.1
[00334876][08 00][00] v1.14.0.25 -> v1.14.0.25
[00334922][09 00][00] v1.8.0.0 -> v1.8.0.0
[00334987][11 00][05] v3.7.15.10 -> v3.7.15.10
[00335062][12 00][00] v1.8.0.0 -> v1.8.0.0
[00335142][12 01][00] v1.8.0.0 -> v1.8.0.0
[00335242][12 02][00] v1.8.0.0 -> v1.8.0.0
[00335322][12 03][00] v1.8.0.0 -> v1.8.0.0
[00335443][15 00][00] v1.1.2.0 -> v1.1.2.0
[00338002][17 00][00] v1.1.0.4 -> v1.1.0.4
[00338102][17 01][00] v2.0.0.8 -> v2.0.0.8
[00338157][19 00][00] v1.0.8.96 -> v1.0.8.96
[00338200]Packet upgrade finish successfully.
[00000665][01 00] Firmware upgrade finished failed (step = 3, err = 0xffffffff).
[00000665][01 00] Firmware upgrade finished failed (step = 3, err = 0xffffffff).
[00000665][01 00] Firmware upgrade finished failed (step = 3, err = 0xffffffff).
[00000665][01 00] Firmware upgrade finished failed (step = 3, err = 0xffffffff).
[00000665][01 00] Firmware upgrade finished failed (step = 3, err = 0xffffffff).
[00000665][01 00] Firmware upgrade finished failed (step = 3, err = 0xffffffff).
[00000665][01 00] Firmware upgrade finished failed (step = 3, err = 0xffffffff).
[00007049]========== remo-con disconnect. boot(15) ============
[00007094]Packet [C:\WM610_FW_V01.11.01.50.bin] detected, card sn [0x990fe1af].
[00007146]Packet upgrade start...
[00007201]Packet checking...
[00007265]Packet vlink 01.11.0150 <-> 01.11.0150.
[00007316]Record vlink 01.04.0010 <-> 01.03.0000 (flow = 0).
[00007367]Done.
[00007404]Version checking[1]...
[00007458][04 00][00] v1.26.0.21 -> v1.30.1.43 need upgrade.
[00020003][08 00][00] device not detected.
[00020044][01 00][00] v1.19.3422 -> v2.70.5440 need upgrade
[00020079][01 01][00] v1.19.3422 -> v2.70.5440 need upgrade
[00020161][03 05][00] v34.1.0.5 -> v34.1.0.5
[00020241][03 06][00] v2.4.20.28 -> v2.4.20.50 need upgrade.
[00020321][05 00][00] v3.0.6.2 -> v3.0.6.2
[00020372][09 00][00] v3.1.0.0 -> v5.0.0.0 need upgrade.
[00020460][11 00][00] v3.3.0.0 -> v3.9.0.0 need upgrade.
[00020561][12 00][00] v1.11.0.0 -> v1.11.0.0
[00020640][12 01][00] v1.11.0.0 -> v1.11.0.0
[00020741][12 02][00] v1.11.0.0 -> v1.11.0.0
[00020841][12 03][00] v1.11.0.0 -> v1.11.0.0
[00033376][15 00][00] device not detected.
[00033459][17 00][00] v1.1.0.8 -> v1.1.0.8
[00033559][17 01][00] v2.0.1.6 -> v2.0.1.6
[00033604][19 00][00] v1.0.8.96 -> v1.0.8.96
[00033640]Done.
[00035679]Waiting for user confirm...
[00045711]Timeout, start upgrade automatically.
[00045785]Firmware upgrading[1]...
[00060398][01 00] Firmware upgrade start...
[00023079][01 00] Firmware upgrade finished successfully.
[00023115]Done.
[00023147]Packet [C:\WM610_FW_V01.11.01.50.bin] resumed, card sn [0x990fe1af].
[00023189]Packet vlink 01.11.0150 <-> 01.11.0150.
[00023227]Record vlink 01.04.0010 <-> 01.03.0000 (flow = 0).
[00023260]Version checking[2]...
[00023307][04 00][00] v1.26.0.21 -> v1.30.1.43 need upgrade.
[00035851][08 00][00] device not detected.
[00035886][01 00][05] v2.70.5440 -> v2.70.5440
[00036006][01 01][00] v1.19.3422 -> v2.70.5440 need upgrade
[00036071][03 05][00] v34.1.0.5 -> v34.1.0.5
[00036130][03 06][00] v2.4.20.28 -> v2.4.20.50 need upgrade.
[00036219][05 00][00] v3.0.6.2 -> v3.0.6.2
[00036266][09 00][00] v3.1.0.0 -> v5.0.0.0 need upgrade.
[00036330][11 00][00] v3.3.0.0 -> v3.9.0.0 need upgrade.
[00036430][12 00][00] v1.11.0.0 -> v1.11.0.0
[00036510][12 01][00] v1.11.0.0 -> v1.11.0.0
[00036610][12 02][00] v1.11.0.0 -> v1.11.0.0
[00036710][12 03][00] v1.11.0.0 -> v1.11.0.0
[00049259][15 00][00] device not detected.
[00049309][17 00][00] v1.1.0.8 -> v1.1.0.8
[00049429][17 01][00] v2.0.1.6 -> v2.0.1.6
[00049480][19 00][00] v1.0.8.96 -> v1.0.8.96
[00049516]Done.
[00049555]Firmware upgrading[2]...
[00049646][01 01] Firmware upgrade start...
[00059928][01 01] Firmware upgrade finished successfully.
[00060075][03 06] Firmware upgrade start...
[00307702][03 06] Firmware upgrade finished successfully.
[00307756][11 00] Firmware upgrade start...
[00374976][11 00] Firmware upgrade finished successfully.
[00375034][09 00] Firmware upgrade start...
[00405633][09 00] Firmware upgrade finished successfully.
[00405698][04 00] Firmware upgrade start...
[00460360][04 00] Firmware upgrade finished successfully.
[00460397]Done.
[00460431]Version checking[3]...
[00460478][04 00][05] v1.30.1.43 -> v1.30.1.43
[00473021][08 00][00] device not detected.
[00473058][01 00][05] v2.70.5440 -> v2.70.5440
[00473094][01 01][05] v2.70.5440 -> v2.70.5440
[00473166][03 05][00] v34.1.0.5 -> v34.1.0.5
[00473226][03 06][05] v2.4.20.50 -> v2.4.20.50
[00473286][05 00][00] v3.0.6.2 -> v3.0.6.2
[00473331][09 00][05] v5.0.0.0 -> v5.0.0.0
[00473406][11 00][05] v3.9.0.0 -> v3.9.0.0
[00473486][12 00][00] v1.11.0.0 -> v1.11.0.0
[00473566][12 01][00] v1.11.0.0 -> v1.11.0.0
[00473646][12 02][00] v1.11.0.0 -> v1.11.0.0
[00473726][12 03][00] v1.11.0.0 -> v1.11.0.0
[00486263][15 00][00] device not detected.
[00486324][17 00][00] v1.1.0.8 -> v1.1.0.8
[00486505][17 01][00] v2.0.1.6 -> v2.0.1.6
[00486584][19 00][00] v1.0.8.96 -> v1.0.8.96
[00486620]Packet upgrade failed at version checking.
[00006590]========== remo-con disconnect. boot(15) ============
[00006629]Packet [C:\WM610_FW_V01.11.01.50.bin] detected, card sn [0x990fe1af].
[00006672]Packet upgrade start...
[00006715]Packet checking...
[00006765]Packet vlink 01.11.0150 <-> 01.11.0150.
[00006809]Record vlink 01.04.0010 <-> 01.03.0000 (flow = 0).
[00006847]Done.
[00006896]Version checking[1]...
[00006943][04 00][00] v1.30.1.43 -> v1.30.1.43
[00019502][08 00][00] device not detected.
[00019538][01 00][00] v2.70.5440 -> v2.70.5440
[00019577][01 01][00] v2.70.5440 -> v2.70.5440
[00019645][03 05][00] v34.1.0.5 -> v34.1.0.5
[00019725][03 06][00] v2.4.20.50 -> v2.4.20.50
[00019804][05 00][00] v3.0.6.2 -> v3.0.6.2
[00019850][09 00][00] v5.0.0.0 -> v5.0.0.0
[00019904][11 00][00] v3.9.0.0 -> v3.9.0.0
[00020004][12 00][00] v1.11.0.0 -> v1.11.0.0
[00020104][12 01][00] v1.11.0.0 -> v1.11.0.0
[00020204][12 02][00] v1.11.0.0 -> v1.11.0.0
[00020284][12 03][00] v1.11.0.0 -> v1.11.0.0
[00032820][15 00][00] device not detected.
[00032884][17 00][00] v1.1.0.8 -> v1.1.0.8
[00032983][17 01][00] v2.0.1.6 -> v2.0.1.6
[00033032][19 00][00] v1.0.8.96 -> v1.0.8.96
[00035069]Packet upgrade failed at version checking.
[00006706]========== remo-con disconnect. boot(15) ============
[00006741]Packet [C:\WM610_FW_V01.11.01.50.bin] detected, card sn [0x990fe1af].
[00006785]Packet upgrade start...
[00006829]Packet checking...
[00006876]Packet vlink 01.11.0150 <-> 01.11.0150.
[00006926]Record vlink 01.04.0010 <-> 01.03.0000 (flow = 0).
[00006975]Done.
[00007014]Version checking[1]...
[00007077][04 00][00] v1.30.1.43 -> v1.30.1.43
[00019620][08 00][00] device not detected.
[00019655][01 00][00] v2.70.5440 -> v2.70.5440
[00019695][01 01][00] v2.70.5440 -> v2.70.5440
[00019761][03 05][00] v34.1.0.5 -> v34.1.0.5
[00019848][03 06][00] v2.4.20.50 -> v2.4.20.50
[00020001][05 00][00] v3.0.6.2 -> v3.0.6.2
[00020052][09 00][00] v5.0.0.0 -> v5.0.0.0
[00020121][11 00][00] v3.9.0.0 -> v3.9.0.0
[00020221][12 00][00] v1.11.0.0 -> v1.11.0.0
[00020321][12 01][00] v1.11.0.0 -> v1.11.0.0
[00020421][12 02][00] v1.11.0.0 -> v1.11.0.0
[00020541][12 03][00] v1.11.0.0 -> v1.11.0.0
[00033085][15 00][00] device not detected.
[00033160][17 00][00] v1.1.0.8 -> v1.1.0.8
[00033260][17 01][00] v2.0.1.6 -> v2.0.1.6
[00033314][19 00][00] v1.0.8.96 -> v1.0.8.96
[00035354]Packet upgrade failed at version checking.
[00006597]========== remo-con disconnect. boot(15) ============
[00006636]Packet [C:\WM610_FW_V01.11.01.50.bin] detected, card sn [0x990fe1af].
[00006680]Packet upgrade start...
[00006725]Packet checking...
[00006774]Packet vlink 01.11.0150 <-> 01.11.0150.
[00006823]Record vlink 01.04.0010 <-> 01.03.0000 (flow = 0).
[00006869]Done.
[00006909]Version checking[1]...
[00006976][04 00][00] v1.30.1.43 -> v1.30.1.43
[00019532][08 00][00] device not detected.
[00019572][01 00][00] v2.70.5440 -> v2.70.5440
[00019610][01 01][00] v2.70.5440 -> v2.70.5440
[00019699][03 05][00] v34.1.0.5 -> v34.1.0.5
[00019770][03 06][00] v2.4.20.50 -> v2.4.20.50
[00019829][05 00][00] v3.0.6.2 -> v3.0.6.2
[00019880][09 00][00] v5.0.0.0 -> v5.0.0.0
[00019929][11 00][00] v3.9.0.0 -> v3.9.0.0
[00020009][12 00][00] v1.11.0.0 -> v1.11.0.0
[00020089][12 01][00] v1.11.0.0 -> v1.11.0.0
[00020190][12 02][00] v1.11.0.0 -> v1.11.0.0
[00020270][12 03][00] v1.11.0.0 -> v1.11.0.0
[00032809][15 00][00] device not detected.
[00032890][17 00][00] v1.1.0.8 -> v1.1.0.8
[00035490][17 01][00] v2.0.1.6 -> v2.0.1.6
[00035540][19 00][00] v1.0.8.96 -> v1.0.8.96
[00037583]Packet upgrade failed at version checking.
[00006538]========== remo-con disconnect. boot(15) ============
[00006585]Packet [C:\WM610_FW_V01.11.01.50.bin] detected, card sn [0xf0d80c13].
[00006626]Packet upgrade start...
[00006672]Packet checking...
[00006805]Packet vlink 01.11.0150 <-> 01.11.0150.
[00006847]Record vlink 01.04.0010 <-> 01.03.0000 (flow = 0).
[00006897]Done.
[00006935]Version checking[1]...
[00007002][04 00][00] v1.30.1.43 -> v1.30.1.43
[00019568][08 00][00] device not detected.
[00019606][01 00][00] v2.70.5440 -> v2.70.5440
[00019644][01 01][00] v2.70.5440 -> v2.70.5440
[00019713][03 05][00] v34.1.0.5 -> v34.1.0.5
[00019792][03 06][00] v2.4.20.50 -> v2.4.20.50
[00019852][05 00][00] v3.0.6.2 -> v3.0.6.2
[00019901][09 00][00] v5.0.0.0 -> v5.0.0.0
[00019973][11 00][00] v3.9.0.0 -> v3.9.0.0
[00020072][12 00][00] v1.11.0.0 -> v1.11.0.0
[00020174][12 01][00] v1.11.0.0 -> v1.11.0.0
[00020272][12 02][00] v1.11.0.0 -> v1.11.0.0
[00020372][12 03][00] v1.11.0.0 -> v1.11.0.0
[00032911][15 00][00] device not detected.
[00032991][17 00][00] v1.1.0.8 -> v1.1.0.8
[00033090][17 01][00] v2.0.1.6 -> v2.0.1.6
[00033135][19 00][00] v1.0.8.96 -> v1.0.8.96
[00035176]Packet upgrade failed at version checking.
|
|