Please select Into the mobile phone version | Continue to access the computer ver.
New Phantom 4 Pro/Pro+ Firmware Released (08/03/2018)
1234Next >
30358 132 2018-3-7
Uploading and Loding Picture ...(0/1)
o(^-^)o
DJI Support
DJI team
Flight distance : 2408 ft

China
Offline

Overview
  • Date:2018.03.08
  • Firmware: V 01.05.0600
  • Phantom 4 Pro Remote Controller Firmware: V 1.4.1.0
  • Phantom 4 Pro+ Remote Controller Firmware: V 1.3.6.0
  • DJI GO 4 App iOS: V 4.2.6
  • DJI GO 4 App Android: V 4.2.6

What’s New?
  • Optimized photo color and contrast.
  • Fixed an issue that occasionally caused flipped live view when the aircraft braked during flight.

Notes:
  • Restart the aircraft and remote controller when the update is complete.
  • If the firmware update fails, restart the aircraft, remote controller and DJI GO 4 app or DJI Assistant 2, then try updating again.


2018-3-7
Use props
Tearuup
lvl.4
Flight distance : 123760 ft
United States
Offline

Just received my Phantom 4 pro + today.  Been reading about the firmware issues.  Hope this works.
2018-3-7
Use props
KedDK
Captain
Flight distance : 1133038 ft
Denmark
Offline

Thanks for also updating the Release Notes this time but when are you going to add all important details?
No where is it shown where ex. the ID broadcast was put on our crafts.

When will you update the manual to reflect current features and limitations?
2018-3-7
Use props
yosephat
lvl.3
Flight distance : 724570 ft
Indonesia
Offline

is it already tested?
2018-3-7
Use props
15matjan
Captain
Flight distance : 1158258 ft
  • >>>
Spain
Offline

yosephat Posted at 2018-3-7 23:34
is it already tested?

Volunteers welcome
We'll figure out in the following days.
Jokes apart, I'd have liked to know more about "what" was optimized in terms of camera, image and picture control, as being something which is critical for most of us
2018-3-8
Use props
FarmerMac
First Officer
Flight distance : 965876 ft
  • >>>
Denmark
Offline

What about the vibration problem that might be the reason the
vent-cracks occurs.
Thats actualy my biggest concern, if it's related to the "old" firmware.
2018-3-8
Use props
dronybaloney
Captain
Flight distance : 12416319 ft
  • >>>
Netherlands
Offline

Dji ? Can you confirm if the vibration problem upon landing/startup has been solved? If not i will not update. Please let us know. Also the video transmission image been improved?
2018-3-8
Use props
Mafia16
Captain
Flight distance : 13003698 ft
  • >>>
Dominican Republic
Offline

lets BETA test these one
2018-3-8
Use props
bernardren07
First Officer
Flight distance : 48425 ft
  • >>>
Singapore
Offline

Thank you for update latest firmware. i going to test it
2018-3-8
Use props
Giammi
Captain
Flight distance : 847795 ft
Germany
Offline


Will this fix the wobbling arms issue as well? I will give it a try anyway.. maybe it helps..
2018-3-8
Use props
dronybaloney
Captain
Flight distance : 12416319 ft
  • >>>
Netherlands
Offline

Giammi Posted at 2018-3-8 06:17
Will this fix the wobbling arms issue as well? I will give it a try anyway.. maybe it helps..

Let us know the results please
2018-3-8
Use props
fansf8629e18
lvl.1
Flight distance : 422933 ft
Australia
Offline

I just tried to update to the latest firmware but it does not even come up in the dji go 4 app, it says I’ve got the latest WTH
2018-3-8
Use props
Nelsonlee
Captain
Flight distance : 1958609 ft
  • >>>
Malaysia
Offline

fansf8629e18 Posted at 2018-3-8 07:14
I just tried to update to the latest firmware but it does not even come up in the dji go 4 app, it says I’ve got the latest WTH

Just connect your aircraft to PC and run DJI Assistant 2 software to update the firmware.
Firmware V01050600.jpg
2018-3-8
Use props
fansf8629e18
lvl.1
Flight distance : 422933 ft
Australia
Offline

fansf8629e18 Posted at 2018-3-8 07:14
I just tried to update to the latest firmware but it does not even come up in the dji go 4 app, it says I’ve got the latest WTH

dji go 4 logged out of the account thatswhy.....meh. Got the new firmware installed, here is hope that all major issues will be resolved:p
2018-3-8
Use props
Dublinphantom
Second Officer
Flight distance : 729760 ft
  • >>>
United Kingdom
Offline

Please let us know. I held off on the last one because of the image flip issue, discoloration and landing wobble issues. if they're not fixed, I will still hold off. I don't usually like to hold off on updates but the fact they released this one so soon shows they knew the last one was very bad.
2018-3-8
Use props
Nelsonlee
Captain
Flight distance : 1958609 ft
  • >>>
Malaysia
Offline

Firmware update done.....

2018-3-8
Use props
Nebuchadnezzar
Captain
Flight distance : 2034944 ft
Spain
Offline

Volunteers to face the fear !!  
2018-3-8
Use props
Nebuchadnezzar
Captain
Flight distance : 2034944 ft
Spain
Offline

Best wishes Dudes !!!
2018-3-8
Use props
FatherXmas
Captain
Flight distance : 4058619 ft
  • >>>
United States
Offline

Downloading it now. I'll try to head outside and fly a battery at lunch today.
2018-3-8
Use props
Genghis9
Captain
United States
Offline

KedDK Posted at 2018-3-7 23:23
Thanks for also updating the Release Notes this time but when are you going to add all important details?
No where is it shown where ex. the ID broadcast was put on our crafts.

Extremely great point
However, der commissar does not have to let the peasants know when they change things for their benefit...
2018-3-8
Use props
Genghis9
Captain
United States
Offline

Has anyone had any results up or down?
2018-3-8
Use props
RMJovo
First Officer
Flight distance : 1517644 ft
United States
Offline

Genghis9 Posted at 2018-3-8 11:21
Has anyone had any results up or down?

Updated the P4P+ today took it to the park for test flight Quad performed OK controller had temperature problem (28 deg F) screen totally unstable due to temp. Only problem I have is getting the change from 2.4GHz to 5.8GHz to work correctly when I switch we have a loss of link, I have discovered a work around. But it is still a pain not to have the frequency switch go without a hitch.
2018-3-8
Use props
Hellsgate
Captain
Flight distance : 1991555 ft
Australia
Offline

Think ill hold off for a while dont want to loose my drone for yet another 6 weeks while it gets repaired again lol
2018-3-8
Use props
Genghis9
Captain
United States
Offline

RMJovo Posted at 2018-3-8 13:06
Updated the P4P+ today took it to the park for test flight Quad performed OK controller had temperature problem (28 deg F) screen totally unstable due to temp. Only problem I have is getting the change from 2.4GHz to 5.8GHz to work correctly when I switch we have a loss of link, I have discovered a work around. But it is still a pain not to have the frequency switch go without a hitch.

Did you try auto setting to see if that worked as needed or you prefer not to go that route?
Issues may have all been related to temp...let us know how it goes when you fly next in more moderate temps and conditions.
Cheers
2018-3-8
Use props
RMJovo
First Officer
Flight distance : 1517644 ft
United States
Offline

Genghis9 Posted at 2018-3-8 14:20
Did you try auto setting to see if that worked as needed or you prefer not to go that route?
Issues may have all been related to temp...let us know how it goes when you fly next in more moderate temps and conditions.
Cheers

Auto and manual have the same problem on the switch of the two frequencies I have seen other threads were others are having the same problem, my workaround is to go into the controller and put the controller into the 5.8Ghz mode first then power up the Quad that prevents the loss of link.
2018-3-8
Use props
Genghis9
Captain
United States
Offline

RMJovo Posted at 2018-3-8 16:06
Auto and manual have the same problem on the switch of the two frequencies I have seen other threads were others are having the same problem, my workaround is to go into the controller and put the controller into the 5.8Ghz mode first then power up the Quad that prevents the loss of link.

ah...to be clear on my end, loss of link between quad and RC or ?
2018-3-8
Use props
alqahfi
lvl.1

Indonesia
Offline

i've been upgrade this firmware and guest what, there is some bug, now i cant fly my drone
2018-3-8
Use props
RMJovo
First Officer
Flight distance : 1517644 ft
United States
Offline

Genghis9 Posted at 2018-3-8 17:16
ah...to be clear on my end, loss of link between quad and RC or ?

Yes Between Quad and RC. Started with the last update for the RC. The controller update in the first part of Feb for the P4P+
2018-3-8
Use props
Genghis9
Captain
United States
Offline

RMJovo Posted at 2018-3-8 19:15
Yes Between Quad and RC. Started with the last update for the RC. The controller update in the first part of Feb for the P4P+

Gotcha
This would explain why I have not seen this issue, I don't have the P4P+ just the plane ole P4P
Well let us know if you get any more updates for this, please?
2018-3-8
Use props
Jenee 2
Captain
Flight distance : 7852129 ft
Australia
Offline

I haven't flown yet but just be aware that the update resets all the camera settings.
2018-3-8
Use props
fans13642d5f
lvl.3
Flight distance : 3406883 ft
United Kingdom
Offline

Well after waiting 2 months for the revised firmware it still doesn't do what it said it could do.
Pano mode still not working, does not capture beyond 10-11 images with "Failed to Capture" message every time. The inverted camera and horrible yellow images have gone but why doesn't Pano mode work?
Will this be fixed or should I just write off Pano mode?
2018-3-9
Use props
Giammi
Captain
Flight distance : 847795 ft
Italy
Offline

dronybaloney Posted at 2018-3-8 06:54
Let us know the results please

Just updated it and looks like the wobbling issue has gone. To be honest, I didn't fly yet. I just idled the motors in my house and try to pull it up. With previous firmware the issue was already present. Now there's no trace of it.
Tomorrow, if the weather will assist me, I'll fly it, just to make sure that everything is fine.
2018-3-9
Use props
Giammi
Captain
Flight distance : 847795 ft
Italy
Offline

DEUCEDOG Posted at 2018-3-9 10:05
Just updated also but not able to fly yet due to rain but i did notice the ac ID is off by default now not on , even after restart  it remains off

What do you mean with ID?
2018-3-9
Use props
Giammi
Captain
Flight distance : 847795 ft
Italy
Offline

DEUCEDOG Posted at 2018-3-9 10:50
UUID that was in a previous fw update in December , it emits a signal with your registration number etc when you fly . it was originally set on as default .

Ah ok got it. Never dig into this. I'll give it a look this weekend. Thank you
2018-3-9
Use props
Mobilcams
First Officer
Flight distance : 2907674 ft
United States
Offline

FarmerMac Posted at 2018-3-8 01:32
What about the vibration problem that might be the reason the
vent-cracks occurs.
Thats actualy my biggest concern, if it's related to the "old" firmware.

Well I can attest this has happened to mine but I didn’t know this was the reason. I noticed today after updating the firmware that it was shuddering when it landed and now have a crack. Funny thing is today’s the one year anniversary of activation and they are telling me I’m probably out of luck on the warranty.
2018-3-9
Use props
S.D. Pilot
Captain
Flight distance : 9208468 ft
  • >>>
United States
Offline

Glad it appears to have fixed the inverted camera issue which is why I'd downloaded to 0300. I'm thinking of giving this newer FW a shot and will test over the weekend.
2018-3-9
Use props
vidya
lvl.2

India
Offline

If in give the latest firmware update is there any problem like fly only till 30 metres
2018-3-9
Use props
AlexVideoShark 5
Captain
Flight distance : 2587172 ft
  • >>>
Italy
Offline

after reading all these comments I have even more fear than before ...
my P4P is going very well ... panoramic photos works well, and also all the other functions,
always lands well (almost always manually) ...
only once the screen has reversed ... while filming from above to down, moving back ... but only that time ...
honestly I'm not sure I have to update him
2018-3-10
Use props
Bartiflier
lvl.2

United Kingdom
Offline

AlexVideoShark 5 Posted at 2018-3-10 00:03
after reading all these comments I have even more fear than before ...
my P4P is going very well ... panoramic photos works well, and also all the other functions,
always lands well (almost always manually) ...

So does this update fix the 1080p Sharpness bug, where all settings of video sharpness from -3 to +3 are identical and look like about +2?

Works in 2.7k and 4k, just not in 1080p, making it useless.

2018-3-10
Use props
Giammi
Captain
Flight distance : 847795 ft
Italy
Offline

Sorry to inform you that the wobbling issue is still there. Both in take off and landing. I have a couple of videos that are showing it pretty well. I made them just to have something to use as proof for warranty in case of any crack in future.
2018-3-10
Use props
1234Next >
Advanced
You need to log in before you can reply Login | Register now

Credit Rules