Overview

• Date:2018.03.08
• Firmware: V 01.05.0600
• Phantom 4 Pro Remote Controller Firmware: V 1.4.1.0
• Phantom 4 Pro+ Remote Controller Firmware: V 1.3.6.0
• DJI GO 4 App iOS: V 4.2.6
• DJI GO 4 App Android: V 4.2.6
  

What’s New?

• Optimized photo color and contrast.
• Fixed an issue that occasionally caused flipped live view when the aircraft braked during flight.
  

Notes:

• Restart the aircraft and remote controller when the update is complete.
• If the firmware update fails, restart the aircraft, remote controller and DJI GO 4 app or DJI Assistant 2, then try updating again.
  

Just received my Phantom 4 pro + today.  Been reading about the firmware issues.  Hope this works.

Thanks for also updating the Release Notes this time but when are you going to add all important details?
No where is it shown where ex. the ID broadcast was put on our crafts.

When will you update the manual to reflect current features and limitations?

is it already tested?

yosephat Posted at 2018-3-7 23:34
is it already tested?

Volunteers welcome
We'll figure out in the following days.
Jokes apart, I'd have liked to know more about "what" was optimized in terms of camera, image and picture control, as being something which is critical for most of us

What about the vibration problem that might be the reason the
vent-cracks occurs.
Thats actualy my biggest concern, if it's related to the "old" firmware.

Dji ? Can you confirm if the vibration problem upon landing/startup has been solved? If not i will not update. Please let us know. Also the video transmission image been improved?

lets BETA test these one

Thank you for update latest firmware. i going to test it

Will this fix the wobbling arms issue as well? I will give it a try anyway.. maybe it helps..

Giammi Posted at 2018-3-8 06:17
Will this fix the wobbling arms issue as well? I will give it a try anyway.. maybe it helps..

Let us know the results please

I just tried to update to the latest firmware but it does not even come up in the dji go 4 app, it says I’ve got the latest WTH

fansf8629e18 Posted at 2018-3-8 07:14
I just tried to update to the latest firmware but it does not even come up in the dji go 4 app, it says I’ve got the latest WTH

Just connect your aircraft to PC and run DJI Assistant 2 software to update the firmware.

fansf8629e18 Posted at 2018-3-8 07:14
I just tried to update to the latest firmware but it does not even come up in the dji go 4 app, it says I’ve got the latest WTH

dji go 4 logged out of the account thatswhy.....meh. Got the new firmware installed, here is hope that all major issues will be resolved:p

Please let us know. I held off on the last one because of the image flip issue, discoloration and landing wobble issues. if they're not fixed, I will still hold off. I don't usually like to hold off on updates but the fact they released this one so soon shows they knew the last one was very bad.

Firmware update done.....

Volunteers to face the fear !!  

Best wishes Dudes !!!

Downloading it now. I'll try to head outside and fly a battery at lunch today.

KedDK Posted at 2018-3-7 23:23
Thanks for also updating the Release Notes this time but when are you going to add all important details?
No where is it shown where ex. the ID broadcast was put on our crafts.

Extremely great point
However, der commissar does not have to let the peasants know when they change things for their benefit...

Has anyone had any results up or down?

Genghis9 Posted at 2018-3-8 11:21
Has anyone had any results up or down?

Updated the P4P+ today took it to the park for test flight Quad performed OK controller had temperature problem (28 deg F) screen totally unstable due to temp. Only problem I have is getting the change from 2.4GHz to 5.8GHz to work correctly when I switch we have a loss of link, I have discovered a work around. But it is still a pain not to have the frequency switch go without a hitch.

Think ill hold off for a while dont want to loose my drone for yet another 6 weeks while it gets repaired again lol

RMJovo Posted at 2018-3-8 13:06
Updated the P4P+ today took it to the park for test flight Quad performed OK controller had temperature problem (28 deg F) screen totally unstable due to temp. Only problem I have is getting the change from 2.4GHz to 5.8GHz to work correctly when I switch we have a loss of link, I have discovered a work around. But it is still a pain not to have the frequency switch go without a hitch.

Did you try auto setting to see if that worked as needed or you prefer not to go that route?
Issues may have all been related to temp...let us know how it goes when you fly next in more moderate temps and conditions.
Cheers

Genghis9 Posted at 2018-3-8 14:20
Did you try auto setting to see if that worked as needed or you prefer not to go that route?
Issues may have all been related to temp...let us know how it goes when you fly next in more moderate temps and conditions.
Cheers

Auto and manual have the same problem on the switch of the two frequencies I have seen other threads were others are having the same problem, my workaround is to go into the controller and put the controller into the 5.8Ghz mode first then power up the Quad that prevents the loss of link.

RMJovo Posted at 2018-3-8 16:06
Auto and manual have the same problem on the switch of the two frequencies I have seen other threads were others are having the same problem, my workaround is to go into the controller and put the controller into the 5.8Ghz mode first then power up the Quad that prevents the loss of link.

ah...to be clear on my end, loss of link between quad and RC or ?

i've been upgrade this firmware and guest what, there is some bug, now i cant fly my drone

Genghis9 Posted at 2018-3-8 17:16
ah...to be clear on my end, loss of link between quad and RC or ?

Yes Between Quad and RC. Started with the last update for the RC. The controller update in the first part of Feb for the P4P+

RMJovo Posted at 2018-3-8 19:15
Yes Between Quad and RC. Started with the last update for the RC. The controller update in the first part of Feb for the P4P+

Gotcha
This would explain why I have not seen this issue, I don't have the P4P+ just the plane ole P4P
Well let us know if you get any more updates for this, please?

I haven't flown yet but just be aware that the update resets all the camera settings.

Well after waiting 2 months for the revised firmware it still doesn't do what it said it could do.
Pano mode still not working, does not capture beyond 10-11 images with "Failed to Capture" message every time. The inverted camera and horrible yellow images have gone but why doesn't Pano mode work?
Will this be fixed or should I just write off Pano mode?

dronybaloney Posted at 2018-3-8 06:54
Let us know the results please

Just updated it and looks like the wobbling issue has gone. To be honest, I didn't fly yet. I just idled the motors in my house and try to pull it up. With previous firmware the issue was already present. Now there's no trace of it.
Tomorrow, if the weather will assist me, I'll fly it, just to make sure that everything is fine.

DEUCEDOG Posted at 2018-3-9 10:05
Just updated also but not able to fly yet due to rain but i did notice the ac ID is off by default now not on , even after restart  it remains off

What do you mean with ID?

DEUCEDOG Posted at 2018-3-9 10:50
UUID that was in a previous fw update in December , it emits a signal with your registration number etc when you fly . it was originally set on as default .

Ah ok got it. Never dig into this. I'll give it a look this weekend. Thank you

FarmerMac Posted at 2018-3-8 01:32
What about the vibration problem that might be the reason the
vent-cracks occurs.
Thats actualy my biggest concern, if it's related to the "old" firmware.

Well I can attest this has happened to mine but I didn’t know this was the reason. I noticed today after updating the firmware that it was shuddering when it landed and now have a crack. Funny thing is today’s the one year anniversary of activation and they are telling me I’m probably out of luck on the warranty.

Glad it appears to have fixed the inverted camera issue which is why I'd downloaded to 0300. I'm thinking of giving this newer FW a shot and will test over the weekend.

If in give the latest firmware update is there any problem like fly only till 30 metres

after reading all these comments I have even more fear than before ...
my P4P is going very well ... panoramic photos works well, and also all the other functions,
always lands well (almost always manually) ...
only once the screen has reversed ... while filming from above to down, moving back ... but only that time ...
honestly I'm not sure I have to update him

AlexVideoShark 5 Posted at 2018-3-10 00:03
after reading all these comments I have even more fear than before ...
my P4P is going very well ... panoramic photos works well, and also all the other functions,
always lands well (almost always manually) ...

So does this update fix the 1080p Sharpness bug, where all settings of video sharpness from -3 to +3 are identical and look like about +2?

Works in 2.7k and 4k, just not in 1080p, making it useless.

Sorry to inform you that the wobbling issue is still there. Both in take off and landing. I have a couple of videos that are showing it pretty well. I made them just to have something to use as proof for warranty in case of any crack in future.