Please help my spark won't stay solid Red, it only flashes little bit after a minute it turns off again..

Already done updating the latest Firmware but again it only flashes a little bit after a minute it turns off again.

Solid red LEDS mean a critical error, so you definitely don't want that to happen!! Read page 10 of the manual to learn what the different colours/flashing patterns mean;

Spark Manual

MKPSG12 Posted at 2018-3-16 03:23
Solid red LEDS mean a critical error, so you definitely don't want that to happen!! Read page 10 of the manual to learn what the different colours/flashing patterns mean;

Spark Manual

Red LED wont TURN ON before flying...

Kerr Posted at 2018-3-16 04:01
Red LED wont TURN ON before flying...

Red LED wont stay solid

MKPSG12 Posted at 2018-3-16 03:23
Solid red LEDS mean a critical error, so you definitely don't want that to happen!! Read page 10 of the manual to learn what the different colours/flashing patterns mean;

Spark Manual

Not true for the front LEDs.

The back LEDs are aircraft status indicators and yes, solid red would be critical error.  However, it appears he's referring to his front LEDs.  The front LEDs will light up solid red unless you are filming.

Kerr Posted at 2018-3-16 04:04
Red LED wont stay solid

Are you filming?  If so, they are supposed to turn off so they don't interfere with the video.

Kerr Posted at 2018-3-16 04:04
Red LED wont stay solid

Are you filming?  If so, they are supposed to turn off so they don't interfere with the video.

Hddeuce Posted at 2018-3-16 07:07
Not true for the front LEDs.

The back LEDs are aircraft status indicators and yes, solid red would be critical error.  However, it appears he's referring to his front LEDs.  The front LEDs will light up solid red unless you are filming.

I am not filming it sir..

Please help my spark won't stay solid Red, it only flashes little bit after a seconds and turns off again..

Hddeuce Posted at 2018-3-16 07:08
Are you filming?  If so, they are supposed to turn off so they don't interfere with the video.

here is the video

did you connect the RC to Spark?

Do the firmware update with the DJI Assistant 2 using your computer. You might have to roll back the firmware then re-install the new one. Should fix your issue. I had the same problem.  

Its the firmware. Regardless of what you phone says you need to push the firmware using the DJI Assistant 2 software and your computer.

Just to verify, has the drone been involved the crash or hard landing before? If not, please try to refresh the firmware via DJI Assistant 2 to see whether the issue remains. Please keep us posted of the latest progress, thanks!

SigP320 Posted at 2018-3-16 15:01
Do the firmware update with the DJI Assistant 2 using your computer. You might have to roll back the firmware then re-install the new one. Should fix your issue. I had the same problem.

already updated to the latest Firmware version from dji go 4 because my spark wont detect in DJI Assistant 2 but did not fix is your spark already fix?

SigP320 Posted at 2018-3-16 15:08
Its the firmware. Regardless of what you phone says you need to push the firmware using the DJI Assistant 2 software and your computer.

already updated to the latest Firmware version from dji go 4 because my spark wont detect in DJI Assistant 2 but did not fix

Kerr Posted at 2018-3-17 04:01
already updated to the latest Firmware version from dji go 4 because my spark wont detect in DJI Assistant 2 but did not fix

Kerr, may I know what's the current version of the DJI Assistant 2? Please try to download the right one from the corresponding page and check again. Re-plug the cable and power all devices on to see whether it helps. Alternatively, you can change to another PC to verify.

DJI Susan Posted at 2018-3-18 23:57
Kerr, may I know what's the current version of the DJI Assistant 2? Please try to download the right one from the corresponding page and check again. Re-plug the cable and power all devices on to see whether it helps. Alternatively, you can change to another PC to verify.

Already fixed.. I only Factory reset using DJI GO Assistant

Kerr Posted at 2018-3-22 05:41
Already fixed.. I only Factory reset using DJI GO Assistant

Thanks for keeping us updated. May I know what's the current status of the front LED? Still solid red? Or it has been fixed? Sorry, I'm a little confused...

Kerr Posted at 2018-3-22 05:41
Already fixed.. I only Factory reset using DJI GO Assistant

How did u make the assistant detect your spark? I have same issue but my assistant 2 at pc and mac can't detect my spark so cannot upgrade or reset firmware

hello, i have the same problem with my spark, I see u solved it. can u pls advice me how to fix mine? thank you