I am curious, if I mount the X5 Vibration Board to my Inspire 1 to be used for my X5, can it also be used with my X3 also?

X5 vibration board does an outstanding job of absorbing the vibration. It will work with the X 3 camera as well.

DJI-Mark Posted at 2018-3-16 11:38
X5 vibration board does an outstanding job of absorbing the vibration. It will work with the X 3 camera as well.

I appreciate your reply...

both styles of vibration boards use the same gimbal mount/lock

The x5 gimbal plate is mainly designed for the x5. X5 cam mounts on the rear part of it as well

If you have an x3 only the front part of the gimbal gets loaded and the rear part gets shakey at speed.

djiuser_dFXv88EjMq36 Posted at 2018-3-17 03:48
The x5 gimbal plate is mainly designed for the x5. X5 cam mounts on the rear part of it as well

If you have an x3 only the front part of the gimbal gets loaded and the rear part gets shakey at speed.

Roger that! Just want to make sure that I can still use the x3 with this vibration board. I don't use it as a race drone, so not too worried about high speed anything. Have race drones for that!