Please select Into the mobile phone version | Continue to access the computer ver.
X5 Vibration Board Compatibility
579 5 2018-3-16
Uploading and Loding Picture ...(0/1)
o(^-^)o
Aero-Drone Imagery
First Officer
Flight distance : 1048652 ft
  • >>>
United States
Offline

I am curious, if I mount the X5 Vibration Board to my Inspire 1 to be used for my X5, can it also be used with my X3 also?
2018-3-16
Use props
DJI-Mark
Moderator

United States
Offline

X5 vibration board does an outstanding job of absorbing the vibration. It will work with the X 3 camera as well.
2018-3-16
Use props
Aero-Drone Imagery
First Officer
Flight distance : 1048652 ft
  • >>>
United States
Offline

DJI-Mark Posted at 2018-3-16 11:38
X5 vibration board does an outstanding job of absorbing the vibration. It will work with the X 3 camera as well.

I appreciate your reply...
2018-3-16
Use props
TruGreen
Captain
Flight distance : 518937 ft
  • >>>
United States
Offline

both styles of vibration boards use the same gimbal mount/lock
2018-3-16
Use props
djiuser_dFXv88EjMq36
lvl.2

Philippines
Offline

The x5 gimbal plate is mainly designed for the x5. X5 cam mounts on the rear part of it as well

If you have an x3 only the front part of the gimbal gets loaded and the rear part gets shakey at speed.
2018-3-17
Use props
Aero-Drone Imagery
First Officer
Flight distance : 1048652 ft
  • >>>
United States
Offline

djiuser_dFXv88EjMq36 Posted at 2018-3-17 03:48
The x5 gimbal plate is mainly designed for the x5. X5 cam mounts on the rear part of it as well

If you have an x3 only the front part of the gimbal gets loaded and the rear part gets shakey at speed.

Roger that! Just want to make sure that I can still use the x3 with this vibration board. I don't use it as a race drone, so not too worried about high speed anything. Have race drones for that!
2018-3-17
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules