CanonMax
Second Officer
Flight distance : 8953215 ft
Netherlands
Offline
|
Hello...
I hoped that DJI GO 4 update V. 4.2.8 would have fixed the fact that when you look into the flightrecords and choose HYBRID the display map-setting will be remembered by the APP...
That was always like this... but now it always starts in "STANDARD" and you have to click on "HYBRID" or "SATELLITE" every time you open a flight... and I mean EVERY flight you open, even when DJI GO 4 is already running...
In the DJI GO app (V. 3.1.30) this is BETTER... the app remembers the setting for the map display you choose...
Could this please be fixed?
Thank you very much...
Dr. MJM (Max) Verdoes
as per: March 21st 2018
DJI Phantom 4 Pro Model WM331A - Serial: 0AXDDCC - 0A20814 (January 8th 2017) flying in MODE 2
Aircraft Firmware: V 01.05.0600 (March 8th 2017)
Phantom 4 Pro Remote Controller (GL300F) Firmware: V 01.04.01.00 (June 8th 2017)
DJI GO 4 App: V 4.2.8 (March 21st 2018)
DJI GS Pro App: V 1.8.1 (3976) (January 18th 2018) - Connected: V 03.02.35.05 Aug 11th 2017)
Precise Fly Safe Database (for Aircraft): V. 01.00.01.09 (February 25th 2018)
Precise Fly Safe Database (for app): V. 01.00.01.09 (February 25th 2018)
Basic App Fly Safe Database: V. 01.00.01.07 (February 25th 2018)
Apple iPad Pro 10.5" 256GB (November 11th 2017) iOS 11.2.6 (February 20th 2018)
Litchi App: V. 2.1.1 (January 11th 2018)
Litchi Magic Leash App: V. 1.0.3 (April 14th 2016)
Litchi Vue App: V. 1.0.1 (October 15th 2016)
KittyHawk App: V. 8.0 (January 29th 2018) installed on January 12th 2018
Hover App: V 2.3.0 (March 13th 2017)
Airmap for Drones App: V 2.1.2 ( 2017)
GPS Plan App: V 2.6.01 (August 30th 2016)
H.D. Sync App (Healthy Drones.com/AirData UAV): V 1.1.2 (Sept 20th 2017)
Vertical Studio App: V 1.5.0 (2017)
Polar Pro App: V 3.1.2 (November 2017)
DJI OSMO
OSMO+ V 1.6.1.0+ (August 31st 2017)
Mobile attachment
DJI GO App: V 3.1.30 (March 21st 2018)
Filmic Pro App: V 6.4.4 (January 26th 2018)
Litchi for Osmo App: V 1.3.2 (May 2017)
|
|