Please select Into the mobile phone version | Continue to access the computer ver.
How do you reset the firmware to factory settings?
1186 5 2018-3-28
Uploading and Loding Picture ...(0/1)
o(^-^)o
PowerOne
lvl.1
Poland
Offline

How do you reset the firmware to factory settings? Because I have a problem with firmware upgrade to version v1.11.20 (Phantom 3 Adv)
2018-3-28
Use props
Scott.
First Officer
Flight distance : 294006 ft
  • >>>
United Kingdom
Offline

You can do this using DJI Assistant
2018-3-28
Use props
Scott.
First Officer
Flight distance : 294006 ft
  • >>>
United Kingdom
Offline

You can do this using DJI Assistant on your computer

https://www.dji.com/phantom-3-pro/info#downloads
2018-3-28
Use props
PowerOne
lvl.1
Poland
Offline

Scott. Posted at 2018-3-28 23:03
You can do this using DJI Assistant on your computer

https://www.dji.com/phantom-3-pro/info#downloads

There is no DJI assistant PC for Phantoma 3 Adv / Pro
2018-3-29
Use props
DJI Elektra
Administrator
Hong Kong
Offline

PowerOne Posted at 2018-3-29 00:08
There is no DJI assistant PC for Phantoma 3 Adv / Pro

Sorry that you can not restore to factory setting. Or you can flash the firmware through SD card. Thanks for your support.
2018-3-29
Use props
solentlife
Captain
Flight distance : 1087530 ft
Latvia
Offline

As DJ E says - there is no reset on FW ... basically the old option to flash back one step is no longer available and only recourse is Hacking ... which I totally advise against.
Try sort out the FW install you have.

Nigel
2018-3-29
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules