I've suddenly start receiving ESC status error after upgrading my P3 Pro to firmware P3X_FW_V01.11.0020.bin. Prior to the upgrade, everything was working perfectly. Will someone please help me. Thank you

Steven, you can try to update the firmware we provided. See if it works.

DJI Thor Posted at 2018-3-28 17:51
Steven, you can try to update the firmware we provided. See if it works.

Thank you!!!  This firmware update solved the problem.  I appreciate your help!!

StevenHuff Posted at 2018-3-28 20:24
Thank you!!!  This firmware update solved the problem.  I appreciate your help!!

Good to hear. Should you have any further questions, please feel free to contact us, we'd glad to help.

having the same issue here could you share the .bin file?

I replaced my ESC and replaced one motor and also made sure that the software was up to date also I reinstalled the software a couple times and still have an esc error. I believe that one of the other motors could have a little dirt in it, would that cause an esc error?

DJI Thor Posted at 2018-3-28 17:51
Steven, you can try to update the firmware we provided. See if it works.

HI. I have a p3 professional and crashed it and damaged the camera. So I put an advanced camera on it   Brand new. And now I have the esc error. Can u help

fans94a8fc8f Posted at 2-17 13:23
HI. I have a p3 professional and crashed it and damaged the camera. So I put an advanced camera on it   Brand new. And now I have the esc error. Can u help

Hi there, may I know if there is only the camera damaged after the crash? And what's the operation before the ECS error shows up? If the ESC error exists after you tried to update the firmware, I will PM you the firmware to try.
If the error shows up after changing the camera or the crash, you may try to update the original Phantom 3 Adv firmware for the drone first and see if this helps.
But as the drone crashed before, I may suggest that you send the drone in for diagnosis for the full performance.

wamuBugMe Posted at 4-24 03:44
Hey DJI Thor, I'm experiencing the same problem. Would you please send me the firmware you talk about?
Greets

Hi wamuBugMe, may I know the specific model of your drone? And can I know the operation before the case happened?

Hi dji thor,,i have experience the same problem an esc error status when ill upgrade the firmware to the v 1.11.20...can u please help me to fix my phantom 3 advanced.ty

I upgraded to v1.11.0020 and now I am also getting the ESC error.  Please advise how this can be fixed.

Sorry, its a P3P

DJI Thor Posted at 2-17 18:41
Hi there, may I know if there is only the camera damaged after the crash? And what's the operation before the ECS error shows up? If the ESC error exists after you tried to update the firmware, I will PM you the firmware to try.
If the error shows up after changing the camera or the crash, you may try to update the original Phantom 3 Adv firmware for the drone first and see if this helps.
But as the drone crashed before, I may suggest that you send the drone in for diagnosis for the full performance.

Hi Thor

I have the same problem after update  my P3P to 020 firmware. Is there a newer a firmaware you can PM?

turbospooky Posted at 5-6 10:31
Hi Thor

I have the same problem after update  my P3P to 020 firmware. Is there a newer a firmaware you can PM?

Hi there, I had sent you PM, please kindly check.

Neville Posted at 4-29 02:25
I upgraded to v1.11.0020 and now I am also getting the ESC error.  Please advise how this can be fixed.

Hi Neville, sorry for the late reply. I sent you PM about the link of the firmware, please kindly check.

djiuser_JZsGxvVfqSyl Posted at 4-28 15:05
Hi dji thor,,i have experience the same problem an esc error status when ill upgrade the firmware to the v 1.11.20...can u please help me to fix my phantom 3 advanced.ty

Hi there, I am sorry for the delay, PM sent, please kindly check.

I upgraded to 1.11 and now i have the same issue plz send me the file... I have a phantom 3 adv

DJI Thor Posted at 5-6 19:05
Hi there, I am sorry for the delay, PM sent, please kindly check.

Hi Thor.
I recently upgraded to 1.11 drone and controller and now i have the same issue (ESC Error Message)  plz send me the file... I have a phantom 3 adv.

Hello..
I have problem with my P3A..after update RC firmware to 1.9.2 version, and then after link RC...my P3A always give me notice everytime i use dji go app to update the firmware on aircraft.

Rc and aircraft can connected but I can't turn on the proper

My aircraft firmware version 1.6.40 ..the problem is..the version firmware on dji.com is lower than mine...firmware version is 1.11.20

Anyone can help me please??

Dante.Pinkman Posted at 6-8 21:47
Hi Thor.
I recently upgraded to 1.11 drone and controller and now i have the same issue (ESC Error Message)  plz send me the file... I have a phantom 3 adv.

Hi Dante, I am sorry for the late reply. I had sent you PM, please kindly check.

fans478bee35 Posted at 6-9 04:03
Hello..
I have problem with my P3A..after update RC firmware to 1.9.2 version, and then after link RC...my P3A always give me notice everytime i use dji go app to update the firmware on aircraft.

Hi there, firmware v1.6.40 is an older firmware, the latest official firmware for Phantom 3 Adv is v1.11.20, please download the latest firmware v1.11.20 from https://www.dji.com/phantom-3-adv/info#downloads and update again.

I believe I have a firmware issue.  The only indication I have is no image transmission from the camera.  The AC seems to function normally otherwise.  I downloaded the current firmware and with the controller turned off, attempted to "upgrade" the firmware.  I captured the firmware log file on my MAC and is pasted below.  Any suggestions would be most appreciated!

[00012240][01 00] Firmware upgrade finished successfully.
[00012388]Done.

[00012479]Packet [C:\P3X_FW_V01.11.0020.bin] resumed, card sn [0x43428892].
[00012611]Packet vlink 01.11.0020 <-> 01.11.0020.
[00012737]Version checking[2]...
[00013020][03 06][00] v2.1.6.18 -> v2.4.20.50 need upgrade.
[00013181][03 05][00] v34.2.0.8 -> v34.2.0.9 need upgrade.
[00013329][04 00][00] v1.36.0.0 -> v1.48.0.0 need upgrade.
[00013539][11 00][00] v1.6.1.0 -> v1.8.0.0 need upgrade.
[00013761][11 01][00] v1.6.1.0 -> v2.0.0.33, firmware v1.6.1.0 not support.
[00013879][11 01][00] v1.6.1.0 -> v2.0.0.33
[00014013][12 00][00] v1.8.0.0 -> v1.12.0.0 need upgrade.
[00014113][12 01][00] v1.8.0.0 -> v1.12.0.0 need upgrade.
[00014273][12 02][00] v1.8.0.0 -> v1.12.0.0 need upgrade.
[00014533][12 03][00] v1.8.0.0 -> v1.12.0.0 need upgrade.
[00014770][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014944][17 00][00] v1.1.1.2 -> v1.1.1.7 need upgrade.
[00015173][17 01][00] v1.0.2.4 -> v1.0.2.7 need upgrade.
[00015339][19 00][00] v1.0.8.96 -> v1.0.8.96
[00015432][01 00][05] v1.32.5432 -> v1.32.5432
[00015485][01 01][00] v1.6.2736 -> v1.32.5432 need upgrade
[00015520][08 00][00] v0.11.0.4 -> v0.13.0.7 need upgrade.
[00015559][09 00][00] v1.7.0.3 -> v4.1.0.0 need upgrade.
[00015586]Done.

[00015617]Firmware upgrading[2]...
[00015749][01 01] Firmware upgrade start...
[00046006][01 01] Firmware upgrade finished successfully.
[00046856][08 00] Firmware upgrade start...
[00012479]========== remo-con disconnect. boot(15) ============
[00012509]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00012538]Packet upgrade start...

[00012577]Packet checking...
[00012608]Packet vlink 01.11.0020 <-> 01.11.0020.
[00012670]Done.

[00012697]Version checking[1]...
[00012764][03 06][00] v2.1.6.18 -> v2.4.20.50 need upgrade.
[00012828][03 05][00] v34.2.0.8 -> v34.2.0.9 need upgrade.
[00012863][04 00][00] v1.36.0.0 -> v1.48.0.0 need upgrade.
[00012964][11 00][00] v1.6.1.0 -> v1.8.0.0 need upgrade.
[00013164][11 01][00] v1.6.1.0 -> v2.0.0.33, firmware v1.6.1.0 not support.
[00013192][11 01][00] v1.6.1.0 -> v2.0.0.33
[00013298][12 00][00] v1.8.0.0 -> v1.12.0.0 need upgrade.
[00013378][12 01][00] v1.8.0.0 -> v1.12.0.0 need upgrade.
[00013452][12 02][00] v1.8.0.0 -> v1.12.0.0 need upgrade.
[00013517][12 03][00] v1.8.0.0 -> v1.12.0.0 need upgrade.
[00026046][15 00][00] device not detected.
[00026138][17 00][00] v1.1.1.2 -> v1.1.1.7 need upgrade.
[00026254][17 01][00] v1.0.2.4 -> v1.0.2.7 need upgrade.
[00026313][19 00][00] v1.0.8.96 -> v1.0.8.96
[00026354][01 00][00] v1.32.5432 -> v1.32.5432
[00026384][01 01][00] v1.32.5432 -> v1.32.5432
[00038912][08 00][00] device not detected.
[00038973][09 00][00] v1.7.0.3 -> v4.1.0.0 need upgrade.
[00039004]Done.

[00041036]Waiting for user confirm...
[00051066]Timeout, start upgrade automatically.

[00051133]Firmware upgrading[1]...
[00051181][12 00] Firmware upgrade start...
[00114198][12 00] Firmware upgrade finished successfully.
[00114244][12 01] Firmware upgrade start...
[00180002][12 01] Firmware upgrade finished successfully.
[00180047][12 02] Firmware upgrade start...
[00244267][12 02] Firmware upgrade finished successfully.
[00244315][12 03] Firmware upgrade start...
[00012420]========== remo-con disconnect. boot(15) ============
[00012448]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00012479]Packet upgrade start...

[00012515]Packet checking...
[00012548]Packet vlink 01.11.0020 <-> 01.11.0020.
[00012615]Done.

[00012647]Version checking[1]...
[00012719][03 06][00] v2.1.6.18 -> v2.4.20.50 need upgrade.
[00012779][03 05][00] v34.2.0.8 -> v34.2.0.9 need upgrade.
[00012815][04 00][00] v1.36.0.0 -> v1.48.0.0 need upgrade.
[00012935][11 00][00] v1.6.1.0 -> v1.8.0.0 need upgrade.
[00013036][11 01][00] v1.6.1.0 -> v2.0.0.33, firmware v1.6.1.0 not support.
[00013066][11 01][00] v1.6.1.0 -> v2.0.0.33
[00013149][12 00][00] v1.12.0.0 -> v1.12.0.0
[00013229][12 01][00] v1.12.0.0 -> v1.12.0.0
[00013384][12 02][00] v1.12.0.0 -> v1.12.0.0
[00013464][12 03][00] v1.12.0.0 -> v1.12.0.0
[00025996][15 00][00] device not detected.
[00026090][17 00][00] v1.1.1.2 -> v1.1.1.7 need upgrade.
[00026209][17 01][00] v1.0.2.4 -> v1.0.2.7 need upgrade.
[00026286][19 00][00] v1.0.8.96 -> v1.0.8.96
[00026315][01 00][00] v1.32.5432 -> v1.32.5432
[00026348][01 01][00] v1.32.5432 -> v1.32.5432
[00038877][08 00][00] device not detected.
[00038924][09 00][00] v1.7.0.3 -> v4.1.0.0 need upgrade.
[00038959]Done.

[00040988]Waiting for user confirm...
[00051021]Timeout, start upgrade automatically.

[00051084]Firmware upgrading[1]...
[00051144][17 00] Firmware upgrade start...
[00145086][17 00] Firmware upgrade finished successfully.
[00145125][17 01] Firmware upgrade start...
[00012427]========== remo-con disconnect. boot(15) ============
[00012459]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00012490]Packet upgrade start...

[00012527]Packet checking...
[00012560]Packet vlink 01.11.0020 <-> 01.11.0020.
[00012629]Done.

[00012660]Version checking[1]...
[00012718][03 06][00] v2.1.6.18 -> v2.4.20.50 need upgrade.
[00012783][03 05][00] v34.2.0.8 -> v34.2.0.9 need upgrade.
[00012819][04 00][00] v1.36.0.0 -> v1.48.0.0 need upgrade.
[00012922][11 00][00] v1.6.1.0 -> v1.8.0.0 need upgrade.
[00013018][11 01][00] v1.6.1.0 -> v2.0.0.33, firmware v1.6.1.0 not support.
[00013047][11 01][00] v1.6.1.0 -> v2.0.0.33
[00013118][12 00][00] v1.12.0.0 -> v1.12.0.0
[00013197][12 01][00] v1.12.0.0 -> v1.12.0.0
[00013296][12 02][00] v1.12.0.0 -> v1.12.0.0
[00013397][12 03][00] v1.12.0.0 -> v1.12.0.0
[00025934][15 00][00] device not detected.
[00026012][17 00][00] v0.0.0.0 -> v1.1.1.7 need upgrade.
[00026112][17 01][00] v0.0.0.0 -> v1.0.2.7 need upgrade.
[00026172][19 00][00] v1.0.8.96 -> v1.0.8.96
[00026204][01 00][00] v1.32.5432 -> v1.32.5432
[00026239][01 01][00] v1.32.5432 -> v1.32.5432
[00038780][08 00][00] device not detected.
[00038913][09 00][00] v1.7.0.3 -> v4.1.0.0 need upgrade.
[00038951]Done.

[00040983]Waiting for user confirm...
[00051014]Timeout, start upgrade automatically.

[00051079]Firmware upgrading[1]...
[00051141][17 00] Firmware upgrade start...
[00131647][17 00] Firmware upgrade finished successfully.
[00131690][17 01] Firmware upgrade start...
[00193130][17 01] Firmware upgrade finished successfully.
[00193172][11 00] Firmware upgrade start...
[00243065][11 00] Firmware upgrade finished successfully.
[00243113][03 05] Firmware upgrade start...
[00320682][03 05] Firmware upgrade finished successfully.
[00320929][03 06] Firmware upgrade start...
[00012910]========== remo-con disconnect. boot(15) ============
[00013034]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00013153]Packet upgrade start...

[00013282]Packet checking...
[00013411]Packet vlink 01.11.0020 <-> 01.11.0020.
[00013560]Done.

[00013659]Version checking[1]...
[00013751][03 06][00] v0.0.0.0 -> v2.4.20.50 need upgrade.
[00013911][03 05][00] v34.2.0.9 -> v34.2.0.9
[00014047][04 00][00] v1.36.0.0 -> v1.48.0.0 need upgrade.
[00088529]========== remo-con disconnect. boot(15) ============
[00088561]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00088598]Packet upgrade start...

[00088631]Packet checking...
[00088663]Packet vlink 01.11.0020 <-> 01.11.0020.
[00088725]Done.

[00088762]Version checking[1]...
[00088814][03 06][00] v0.0.0.0 -> v2.4.20.50 need upgrade.
[00088874][03 05][00] v34.2.0.9 -> v34.2.0.9
[00088913][04 00][00] v1.36.0.0 -> v1.48.0.0 need upgrade.
[00101453][11 00][00] device not detected.
[00113984][11 01][00] device not detected.
[00126523][12 00][00] device not detected.
[00139051][12 01][00] device not detected.
[00151580][12 02][00] device not detected.
[00164107][12 03][00] device not detected.
[00164234][15 00][00] v1.1.2.0 -> v1.1.2.0
[00176764][17 00][00] device not detected.
[00189293][17 01][00] device not detected.
[00189430][19 00][00] v1.0.8.96 -> v1.0.8.96
[00189460][01 00][00] v1.32.5432 -> v1.32.5432
[00189490][01 01][00] v1.32.5432 -> v1.32.5432
[00189546][08 00][00] v0.11.0.4 -> v0.13.0.7 need upgrade.
[00189590][09 00][00] v1.7.0.3 -> v4.1.0.0 need upgrade.
[00189621]Done.

[00191649]Waiting for user confirm...
[00201677]Timeout, start upgrade automatically.

[00201740]Firmware upgrading[1]...
[00201770][08 00] Firmware checksum failed.
[00201800]Packet upgrade failed at firmware upgrade.



[00056585]========== remo-con disconnect. boot(15) ============
[00056616]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00056655]Packet upgrade start...

[00056691]Packet checking...
[00056725]Packet vlink 01.11.0020 <-> 01.11.0020.
[00056790]Done.

[00056830]Version checking[1]...
[00056898][03 06][00] v0.0.0.0 -> v2.4.20.50 need upgrade.
[00056958][03 05][00] v34.2.0.9 -> v34.2.0.9
[00057003][04 00][00] v1.36.0.0 -> v1.48.0.0 need upgrade.
[00069541][11 00][00] device not detected.
[00082071][11 01][00] device not detected.
[00012509]========== remo-con disconnect. boot(15) ============
[00012543]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00012576]Packet upgrade start...

[00012619]Packet checking...
[00012656]Packet vlink 01.11.0020 <-> 01.11.0020.
[00012719]Done.

[00012759]Version checking[1]...
[00012814][03 06][00] v0.0.0.0 -> v2.4.20.50 need upgrade.
[00012894][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012941][04 00][00] v1.36.0.0 -> v1.48.0.0 need upgrade.
[00025474][11 00][00] device not detected.
[00038011][11 01][00] device not detected.
[00012481]========== remo-con disconnect. boot(15) ============
[00012515]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00012548]Packet upgrade start...

[00012587]Packet checking...
[00012622]Packet vlink 01.11.0020 <-> 01.11.0020.
[00012687]Done.

[00012720]Version checking[1]...
[00012786][03 06][00] v0.0.0.0 -> v2.4.20.50 need upgrade.
[00012921][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012962][04 00][00] v1.36.0.0 -> v1.48.0.0 need upgrade.
[00012480]========== remo-con disconnect. boot(15) ============
[00012512]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00012545]Packet upgrade start...

[00012581]Packet checking...
[00012620]Packet vlink 01.11.0020 <-> 01.11.0020.
[00012686]Done.

[00012720]Version checking[1]...
[00012787][03 06][00] v0.0.0.0 -> v2.4.20.50 need upgrade.
[00012866][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012904][04 00][00] v1.36.0.0 -> v1.48.0.0 need upgrade.
[00012820]========== remo-con disconnect. boot(15) ============
[00012855]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00012889]Packet upgrade start...

[00012931]Packet checking...
[00012966]Packet vlink 01.11.0020 <-> 01.11.0020.
[00013031]Done.

[00013065]Version checking[1]...
[00013126][03 06][00] v0.0.0.0 -> v2.4.20.50 need upgrade.
[00013186][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013228][04 00][00] v1.36.0.0 -> v1.48.0.0 need upgrade.
[00025763][11 00][00] device not detected.
[00038297][11 01][00] device not detected.
[00050838][12 00][00] device not detected.
[00063369][12 01][00] device not detected.
[00075906][12 02][00] device not detected.
[00088442][12 03][00] device not detected.
[00100973][15 00][00] device not detected.
[00113506][17 00][00] device not detected.
[00126044][17 01][00] device not detected.
[00126102][19 00][00] v1.0.8.96 -> v1.0.8.96
[00126152][01 00][00] v1.32.5432 -> v1.32.5432
[00126192][01 01][00] v1.32.5432 -> v1.32.5432
[00138728][08 00][00] device not detected.
[00138783][09 00][00] v1.7.0.3 -> v4.1.0.0 need upgrade.
[00138823]Done.

[00140856]Waiting for user confirm...
[00150890]Timeout, start upgrade automatically.

[00150955]Firmware upgrading[1]...
[00151201][03 06] Firmware upgrade start...
[00530875][03 06] Firmware upgrade finished successfully.
[00531031][09 00] Firmware upgrade start...
[00583223][09 00] Firmware upgrade finished successfully.
[00583282][04 00] Firmware upgrade start...
[00012434]========== remo-con disconnect. boot(15) ============
[00012469]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00012503]Packet upgrade start...

[00012544]Packet checking...
[00012577]Packet vlink 01.11.0020 <-> 01.11.0020.
[00012647]Done.

[00012683]Version checking[1]...
[00012773][03 06][00] v2.4.20.50 -> v2.4.20.50
[00012853][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012899][04 00][00] v0.0.0.0 -> v1.48.0.0 need upgrade.
[00013033][11 00][00] v1.6.1.0 -> v1.8.0.0 need upgrade.
[00013153][11 01][00] v1.6.1.0 -> v2.0.0.33, firmware v1.6.1.0 not support.
[00013188][11 01][00] v1.6.1.0 -> v2.0.0.33
[00013293][12 00][00] v1.12.0.0 -> v1.12.0.0
[00013384][12 01][00] v1.12.0.0 -> v1.12.0.0
[00013484][12 02][00] v1.12.0.0 -> v1.12.0.0
[00013589][12 03][00] v1.12.0.0 -> v1.12.0.0
[00026127][15 00][00] device not detected.
[00026222][17 00][00] v1.1.1.7 -> v1.1.1.7
[00026343][17 01][00] v1.0.2.7 -> v1.0.2.7
[00026390][19 00][00] v1.0.8.96 -> v1.0.8.96
[00026426][01 00][00] v1.32.5432 -> v1.32.5432
[00026464][01 01][00] v1.32.5432 -> v1.32.5432
[00038999][08 00][00] device not detected.
[00039070][09 00][00] v4.1.0.0 -> v4.1.0.0
[00039103]Done.

[00041145]Waiting for user confirm...
[00051179]Timeout, start upgrade automatically.

[00051251]Firmware upgrading[1]...
[00051301][11 00] Firmware upgrade start...
[00098252][11 00] Firmware upgrade finished successfully.
[00098313][04 00] Firmware upgrade start...
[00012434]========== remo-con disconnect. boot(15) ============
[00012469]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00012504]Packet upgrade start...

[00012545]Packet checking...
[00012586]Packet vlink 01.11.0020 <-> 01.11.0020.
[00012653]Done.

[00012687]Version checking[1]...
[00012758][03 06][00] v2.4.20.50 -> v2.4.20.50
[00012823][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012946][04 00][00] v0.0.0.0 -> v1.48.0.0 need upgrade.
[00013058][11 00][00] v1.8.0.0 -> v1.8.0.0
[00013180][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00013214][11 01][00] v1.8.0.0 -> v2.0.0.33
[00013313][12 00][00] v1.12.0.0 -> v1.12.0.0
[00013392][12 01][00] v1.12.0.0 -> v1.12.0.0
[00013492][12 02][00] v1.12.0.0 -> v1.12.0.0
[00013572][12 03][00] v1.12.0.0 -> v1.12.0.0
[00026113][15 00][00] device not detected.
[00026208][17 00][00] v1.1.1.7 -> v1.1.1.7
[00026353][17 01][00] v1.0.2.7 -> v1.0.2.7
[00026403][19 00][00] v1.0.8.96 -> v1.0.8.96
[00026445][01 00][00] v1.32.5432 -> v1.32.5432
[00026481][01 01][00] v1.32.5432 -> v1.32.5432
[00039017][08 00][00] device not detected.
[00039084][09 00][00] v4.1.0.0 -> v4.1.0.0
[00039123]Done.

[00041158]Waiting for user confirm...
[00051193]Timeout, start upgrade automatically.

[00051265]Firmware upgrading[1]...
[00051330][04 00] Firmware upgrade start...
[00100556][04 00] Firmware upgrade finished successfully.
[00100594]Done.

[00100630]Version checking[2]...
[00100713][03 06][00] v2.4.20.50 -> v2.4.20.50
[00100783][03 05][00] v34.2.0.9 -> v34.2.0.9
[00100843][04 00][05] v1.48.0.0 -> v1.48.0.0
[00100944][11 00][00] v1.8.0.0 -> v1.8.0.0
[00101064][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00101102][11 01][00] v1.8.0.0 -> v2.0.0.33
[00101198][12 00][00] v1.12.0.0 -> v1.12.0.0
[00101324][12 01][00] v1.12.0.0 -> v1.12.0.0
[00101425][12 02][00] v1.12.0.0 -> v1.12.0.0
[00101513][12 03][00] v1.12.0.0 -> v1.12.0.0
[00114048][15 00][00] device not detected.
[00114133][17 00][00] v1.1.1.7 -> v1.1.1.7
[00114259][17 01][00] v1.0.2.7 -> v1.0.2.7
[00114308][19 00][00] v1.0.8.96 -> v1.0.8.96
[00114344][01 00][00] v1.32.5432 -> v1.32.5432
[00114388][01 01][00] v1.32.5432 -> v1.32.5432
[00126928][08 00][00] device not detected.
[00126990][09 00][00] v4.1.0.0 -> v4.1.0.0
[00127035]Packet upgrade failed at version checking.



[00012448]========== remo-con disconnect. boot(15) ============
[00012485]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00012519]Packet upgrade start...

[00012558]Packet checking...
[00012601]Packet vlink 01.11.0020 <-> 01.11.0020.
[00012669]Done.

[00012708]Version checking[1]...
[00012794][03 06][00] v2.4.20.50 -> v2.4.20.50
[00012899][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012950][04 00][00] v1.48.0.0 -> v1.48.0.0
[00013077][11 00][00] v1.8.0.0 -> v1.8.0.0
[00013194][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00013234][11 01][00] v1.8.0.0 -> v2.0.0.33
[00013327][12 00][00] v1.12.0.0 -> v1.12.0.0
[00013434][12 01][00] v1.12.0.0 -> v1.12.0.0
[00013533][12 02][00] v1.12.0.0 -> v1.12.0.0
[00013648][12 03][00] v1.12.0.0 -> v1.12.0.0
[00026187][15 00][00] device not detected.
[00026303][17 00][00] v1.1.1.7 -> v1.1.1.7
[00026443][17 01][00] v1.0.2.7 -> v1.0.2.7
[00026510][19 00][00] v1.0.8.96 -> v1.0.8.96
[00026553][01 00][00] v1.32.5432 -> v1.32.5432
[00026595][01 01][00] v1.32.5432 -> v1.32.5432
[00039134][08 00][00] device not detected.
[00039189][09 00][00] v4.1.0.0 -> v4.1.0.0
[00039229]Packet upgrade failed at version checking.



[00014685]========== remo-con disconnect. boot(15) ============
[00014726]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0xc30510a5].
[00014770]Packet upgrade start...

[00014810]Packet checking...
[00014852]Packet vlink 01.11.0020 <-> 01.11.0020.
[00014924]Done.

[00014970]Version checking[1]...
[00015053][03 06][00] v2.4.20.50 -> v2.4.20.50
[00015132][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015178][04 00][00] v1.48.0.0 -> v1.48.0.0
[00015332][11 00][00] v1.8.0.0 -> v1.8.0.0
[00015452][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00015491][11 01][00] v1.8.0.0 -> v2.0.0.33
[00015580][12 00][00] v1.12.0.0 -> v1.12.0.0
[00015680][12 01][00] v1.12.0.0 -> v1.12.0.0
[00015780][12 02][00] v1.12.0.0 -> v1.12.0.0
[00015965][12 03][00] v1.12.0.0 -> v1.12.0.0
[00028507][15 00][00] device not detected.
[00028601][17 00][00] v1.1.1.7 -> v1.1.1.7
[00028746][17 01][00] v1.0.2.7 -> v1.0.2.7
[00028807][19 00][00] v1.0.8.96 -> v1.0.8.96
[00028849][01 00][00] v1.32.5432 -> v1.32.5432
[00028889][01 01][00] v1.32.5432 -> v1.32.5432
[00041430][08 00][00] device not detected.
[00041487][09 00][00] v4.1.0.0 -> v4.1.0.0
[00041527]Packet upgrade failed at version checking.



[00012584]========== remo-con disconnect. boot(15) ============
[00012640]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0xc30510a5].
[00012691]Packet upgrade start...

[00012736]Packet checking...
[00012778]Packet vlink 01.11.0020 <-> 01.11.0020.
[00012848]Done.

[00012890]Version checking[1]...
[00012970][03 06][00] v2.4.20.50 -> v2.4.20.50
[00013050][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013101][04 00][00] v1.48.0.0 -> v1.48.0.0
[00013231][11 00][00] v1.8.0.0 -> v1.8.0.0
[00013370][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00013409][11 01][00] v1.8.0.0 -> v2.0.0.33
[00013525][12 00][00] v1.12.0.0 -> v1.12.0.0
[00013629][12 01][00] v1.12.0.0 -> v1.12.0.0
[00013729][12 02][00] v1.12.0.0 -> v1.12.0.0
[00013818][12 03][00] v1.12.0.0 -> v1.12.0.0
[00026360][15 00][00] device not detected.
[00026455][17 00][00] v1.1.1.7 -> v1.1.1.7
[00026579][17 01][00] v1.0.2.7 -> v1.0.2.7
[00026647][19 00][00] v1.0.8.96 -> v1.0.8.96
[00026687][01 00][00] v1.32.5432 -> v1.32.5432
[00026727][01 01][00] v1.32.5432 -> v1.32.5432
[00039268][08 00][00] device not detected.
[00039350][09 00][00] v4.1.0.0 -> v4.1.0.0
[00039390]Packet upgrade failed at version checking.



[00014561]========== remo-con disconnect. boot(15) ============
[00014604]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00014641]Packet upgrade start...

[00014684]Packet checking...
[00014722]Packet vlink 01.11.0020 <-> 01.11.0020.
[00014797]Done.

[00014836]Version checking[1]...
[00015014][03 06][00] v2.4.20.50 -> v2.4.20.50
[00015114][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015161][04 00][00] v1.48.0.0 -> v1.48.0.0
[00015294][11 00][00] v1.8.0.0 -> v1.8.0.0
[00015415][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00015462][11 01][00] v1.8.0.0 -> v2.0.0.33
[00015563][12 00][00] v1.12.0.0 -> v1.12.0.0
[00015663][12 01][00] v1.12.0.0 -> v1.12.0.0
[00015764][12 02][00] v1.12.0.0 -> v1.12.0.0
[00015863][12 03][00] v1.12.0.0 -> v1.12.0.0
[00028402][15 00][00] device not detected.
[00028523][17 00][00] v1.1.1.7 -> v1.1.1.7
[00028663][17 01][00] v1.0.2.7 -> v1.0.2.7
[00028728][19 00][00] v1.0.8.96 -> v1.0.8.96
[00028767][01 00][00] v1.32.5432 -> v1.32.5432
[00028810][01 01][00] v1.32.5432 -> v1.32.5432
[00041351][08 00][00] device not detected.
[00041410][09 00][00] v4.1.0.0 -> v4.1.0.0
[00041457]Packet upgrade failed at version checking.



[00013264]========== remo-con disconnect. boot(15) ============
[00013301]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00013345]Packet upgrade start...

[00013396]Packet checking...
[00013454]Packet vlink 01.11.0020 <-> 01.11.0020.
[00013526]Done.

[00013565]Version checking[1]...
[00013624][03 06][00] v2.4.20.50 -> v2.4.20.50
[00013684][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013746][04 00][00] v1.48.0.0 -> v1.48.0.0
[00013868][11 00][00] v1.8.0.0 -> v1.8.0.0
[00013984][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00014031][11 01][00] v1.8.0.0 -> v2.0.0.33
[00014121][12 00][00] v1.12.0.0 -> v1.12.0.0
[00014193][12 01][00] v1.12.0.0 -> v1.12.0.0
[00014273][12 02][00] v1.12.0.0 -> v1.12.0.0
[00014369][12 03][00] v1.12.0.0 -> v1.12.0.0
[00026908][15 00][00] device not detected.
[00026993][17 00][00] v1.1.1.7 -> v1.1.1.7
[00027114][17 01][00] v1.0.2.7 -> v1.0.2.7
[00027174][19 00][00] v1.0.8.96 -> v1.0.8.96
[00027219][01 00][00] v1.32.5432 -> v1.32.5432
[00027259][01 01][00] v1.32.5432 -> v1.32.5432
[00039810][08 00][00] device not detected.
[00039975][09 00][00] v4.1.0.0 -> v4.1.0.0
[00040015]Packet upgrade failed at version checking.



[00015221]========== remo-con disconnect. boot(15) ============
[00015259]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00015304]Packet upgrade start...

[00015349]Packet checking...
[00015390]Packet vlink 01.11.0020 <-> 01.11.0020.
[00015468]Done.

[00015510]Version checking[1]...
[00015602][03 06][00] v2.4.20.50 -> v2.4.20.50
[00015678][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015724][04 00][00] v1.48.0.0 -> v1.48.0.0
[00018346][11 00][00] v1.8.0.0 -> v1.8.0.0
[00018462][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00018502][11 01][00] v1.8.0.0 -> v2.0.0.33
[00018618][12 00][00] v1.12.0.0 -> v1.12.0.0
[00018722][12 01][00] v1.12.0.0 -> v1.12.0.0
[00018823][12 02][00] v1.12.0.0 -> v1.12.0.0
[00018913][12 03][00] v1.12.0.0 -> v1.12.0.0
[00031463][15 00][00] device not detected.
[00031547][17 00][00] v1.1.1.7 -> v1.1.1.7
[00031666][17 01][00] v1.0.2.7 -> v1.0.2.7
[00031722][19 00][00] v1.0.8.96 -> v1.0.8.96
[00031767][01 00][00] v1.32.5432 -> v1.32.5432
[00031812][01 01][00] v1.32.5432 -> v1.32.5432
[00044354][08 00][00] device not detected.
[00044423][09 00][00] v4.1.0.0 -> v4.1.0.0
[00044464]Packet upgrade failed at version checking.



[00014801]========== remo-con disconnect. boot(15) ============
[00014846]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00014890]Packet upgrade start...

[00014942]Packet checking...
[00014989]Packet vlink 01.11.0020 <-> 01.11.0020.
[00015066]Done.

[00015109]Version checking[1]...
[00015188][03 06][00] v2.4.20.50 -> v2.4.20.50
[00015268][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015322][04 00][00] v1.48.0.0 -> v1.48.0.0
[00015449][11 00][00] v1.8.0.0 -> v1.8.0.0
[00015567][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00015611][11 01][00] v1.8.0.0 -> v2.0.0.33
[00015732][12 00][00] v1.12.0.0 -> v1.12.0.0
[00015897][12 01][00] v1.12.0.0 -> v1.12.0.0
[00015997][12 02][00] v1.12.0.0 -> v1.12.0.0
[00016101][12 03][00] v1.12.0.0 -> v1.12.0.0
[00028650][15 00][00] device not detected.
[00028736][17 00][00] v1.1.1.7 -> v1.1.1.7
[00028857][17 01][00] v1.0.2.7 -> v1.0.2.7
[00028913][19 00][00] v1.0.8.96 -> v1.0.8.96
[00028958][01 00][00] v1.32.5432 -> v1.32.5432
[00029010][01 01][00] v1.32.5432 -> v1.32.5432
[00041556][08 00][00] device not detected.
[00041613][09 00][00] v4.1.0.0 -> v4.1.0.0
[00041667]Packet upgrade failed at version checking.



[00012487]========== remo-con disconnect. boot(15) ============
[00012528]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00012570]Packet upgrade start...

[00012620]Packet checking...
[00012664]Packet vlink 01.11.0020 <-> 01.11.0020.
[00012736]Done.

[00012783]Version checking[1]...
[00012876][03 06][00] v2.4.20.50 -> v2.4.20.50
[00012956][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013002][04 00][00] v1.48.0.0 -> v1.48.0.0
[00013137][11 00][00] v1.8.0.0 -> v1.8.0.0
[00013256][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00013296][11 01][00] v1.8.0.0 -> v2.0.0.33
[00013401][12 00][00] v1.12.0.0 -> v1.12.0.0
[00013504][12 01][00] v1.12.0.0 -> v1.12.0.0
[00013609][12 02][00] v1.12.0.0 -> v1.12.0.0
[00013745][12 03][00] v1.12.0.0 -> v1.12.0.0
[00026294][15 00][00] device not detected.
[00026385][17 00][00] v1.1.1.7 -> v1.1.1.7
[00026528][17 01][00] v1.0.2.7 -> v1.0.2.7
[00026580][19 00][00] v1.0.8.96 -> v1.0.8.96
[00026632][01 00][00] v1.32.5432 -> v1.32.5432
[00026673][01 01][00] v1.32.5432 -> v1.32.5432
[00039214][08 00][00] device not detected.
[00039301][09 00][00] v4.1.0.0 -> v4.1.0.0
[00039341]Packet upgrade failed at version checking.



[00012593]========== remo-con disconnect. boot(15) ============
[00012635]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00012676]Packet upgrade start...

[00012729]Packet checking...
[00012864]Packet vlink 01.11.0020 <-> 01.11.0020.
[00012937]Done.

[00012980]Version checking[1]...
[00013080][03 06][00] v2.4.20.50 -> v2.4.20.50
[00013158][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013213][04 00][00] v1.48.0.0 -> v1.48.0.0
[00013338][11 00][00] v1.8.0.0 -> v1.8.0.0
[00013476][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00013638][11 01][00] v1.8.0.0 -> v2.0.0.33
[00013740][12 00][00] v1.12.0.0 -> v1.12.0.0
[00013838][12 01][00] v1.12.0.0 -> v1.12.0.0
[00013947][12 02][00] v1.12.0.0 -> v1.12.0.0
[00014047][12 03][00] v1.12.0.0 -> v1.12.0.0
[00026590][15 00][00] device not detected.
[00026686][17 00][00] v1.1.1.7 -> v1.1.1.7
[00026820][17 01][00] v1.0.2.7 -> v1.0.2.7
[00026897][19 00][00] v1.0.8.96 -> v1.0.8.96
[00026941][01 00][00] v1.32.5432 -> v1.32.5432
[00026985][01 01][00] v1.32.5432 -> v1.32.5432
[00039544][08 00][00] device not detected.
[00039617][09 00][00] v4.1.0.0 -> v4.1.0.0
[00039657]Packet upgrade failed at version checking.



[00278516]========== remo-con disconnect. boot(15) ============
[00278556]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00278598]Packet upgrade start...

[00278647]Packet checking...
[00278696]Packet vlink 01.11.0020 <-> 01.11.0020.
[00278771]Done.

[00278812]Version checking[1]...
[00278918][03 06][00] v2.4.20.50 -> v2.4.20.50
[00278998][03 05][00] v34.2.0.9 -> v34.2.0.9
[00279064][04 00][00] v1.48.0.0 -> v1.48.0.0
[00279181][11 00][00] v1.8.0.0 -> v1.8.0.0
[00279326][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00279375][11 01][00] v1.8.0.0 -> v2.0.0.33
[00279492][12 00][00] v1.12.0.0 -> v1.12.0.0
[00279592][12 01][00] v1.12.0.0 -> v1.12.0.0
[00279691][12 02][00] v1.12.0.0 -> v1.12.0.0
[00279791][12 03][00] v1.12.0.0 -> v1.12.0.0
[00292335][15 00][00] device not detected.
[00292432][17 00][00] v1.1.1.7 -> v1.1.1.7
[00292572][17 01][00] v1.0.2.7 -> v1.0.2.7
[00292639][19 00][00] v1.0.8.96 -> v1.0.8.96
[00292762][01 00][00] v1.32.5432 -> v1.32.5432
[00292805][01 01][00] v1.32.5432 -> v1.32.5432
[00305350][08 00][00] device not detected.
[00305420][09 00][00] v4.1.0.0 -> v4.1.0.0
[00305463]Packet upgrade failed at version checking.



[00816717]========== remo-con disconnect. boot(15) ============
[00816766]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00816809]Packet upgrade start...

[00816863]Packet checking...
[00816906]Packet vlink 01.11.0020 <-> 01.11.0020.
[00816979]Done.

[00817030]Version checking[1]...
[00817111][03 06][00] v2.4.20.50 -> v2.4.20.50
[00817196][03 05][00] v34.2.0.9 -> v34.2.0.9
[00817246][04 00][00] v1.48.0.0 -> v1.48.0.0
[00817358][11 00][00] v1.8.0.0 -> v1.8.0.0
[00817476][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00817526][11 01][00] v1.8.0.0 -> v2.0.0.33
[00817600][12 00][00] v1.12.0.0 -> v1.12.0.0
[00817691][12 01][00] v1.12.0.0 -> v1.12.0.0
[00817779][12 02][00] v1.12.0.0 -> v1.12.0.0
[00817875][12 03][00] v1.12.0.0 -> v1.12.0.0
[00830418][15 00][00] device not detected.
[00830520][17 00][00] v1.1.1.7 -> v1.1.1.7
[00830645][17 01][00] v1.0.2.7 -> v1.0.2.7
[00830706][19 00][00] v1.0.8.96 -> v1.0.8.96
[00830754][01 00][00] v1.32.5432 -> v1.32.5432
[00830798][01 01][00] v1.32.5432 -> v1.32.5432
[00843361][08 00][00] device not detected.
[00843426][09 00][00] v4.1.0.0 -> v4.1.0.0
[00843468]Packet upgrade failed at version checking.



[00117329]========== remo-con disconnect. boot(15) ============
[00117375]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00117424]Packet upgrade start...

[00117481]Packet checking...
[00117529]Packet vlink 01.11.0020 <-> 01.11.0020.
[00117604]Done.

[00117659]Version checking[1]...
[00117741][03 06][00] v2.4.20.50 -> v2.4.20.50
[00117840][03 05][00] v34.2.0.9 -> v34.2.0.9
[00117895][04 00][00] v1.48.0.0 -> v1.48.0.0
[00118022][11 00][00] v1.8.0.0 -> v1.8.0.0
[00118140][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00118275][11 01][00] v1.8.0.0 -> v2.0.0.33
[00118393][12 00][00] v1.12.0.0 -> v1.12.0.0
[00118493][12 01][00] v1.12.0.0 -> v1.12.0.0
[00118593][12 02][00] v1.12.0.0 -> v1.12.0.0
[00118693][12 03][00] v1.12.0.0 -> v1.12.0.0
[00131242][15 00][00] device not detected.
[00131330][17 00][00] v1.1.1.7 -> v1.1.1.7
[00131475][17 01][00] v1.0.2.7 -> v1.0.2.7
[00131545][19 00][00] v1.0.8.96 -> v1.0.8.96
[00131591][01 00][00] v1.32.5432 -> v1.32.5432
[00131649][01 01][00] v1.32.5432 -> v1.32.5432
[00144197][08 00][00] device not detected.
[00144267][09 00][00] v4.1.0.0 -> v4.1.0.0
[00144322]Packet upgrade failed at version checking.



[00014658]========== remo-con disconnect. boot(15) ============
[00014706]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00014753]Packet upgrade start...

[00014798]Packet checking...
[00014844]Packet vlink 01.11.0020 <-> 01.11.0020.
[00014925]Done.

[00014968]Version checking[1]...
[00015052][03 06][00] v2.4.20.50 -> v2.4.20.50
[00015131][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015181][04 00][00] v1.48.0.0 -> v1.48.0.0
[00015293][11 00][00] v1.8.0.0 -> v1.8.0.0
[00015433][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00015477][11 01][00] v1.8.0.0 -> v2.0.0.33
[00015592][12 00][00] v1.12.0.0 -> v1.12.0.0
[00015683][12 01][00] v1.12.0.0 -> v1.12.0.0
[00015782][12 02][00] v1.12.0.0 -> v1.12.0.0
[00015863][12 03][00] v1.12.0.0 -> v1.12.0.0
[00028404][15 00][00] device not detected.
[00028503][17 00][00] v1.1.1.7 -> v1.1.1.7
[00028643][17 01][00] v1.0.2.7 -> v1.0.2.7
[00028704][19 00][00] v1.0.8.96 -> v1.0.8.96
[00028750][01 00][00] v1.32.5432 -> v1.32.5432
[00028794][01 01][00] v1.32.5432 -> v1.32.5432
[00041340][08 00][00] device not detected.
[00041403][09 00][00] v4.1.0.0 -> v4.1.0.0
[00041450]Packet upgrade failed at version checking.



[00012531]========== remo-con disconnect. boot(15) ============
[00012576]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00012704]Packet upgrade start...

[00012794]Packet checking...
[00012842]Packet vlink 01.11.0020 <-> 01.11.0020.
[00012922]Done.

[00012966]Version checking[1]...
[00013031][03 06][00] v2.4.20.50 -> v2.4.20.50
[00013113][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013165][04 00][00] v1.48.0.0 -> v1.48.0.0
[00013272][11 00][00] v1.8.0.0 -> v1.8.0.0
[00013552][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00013600][11 01][00] v1.8.0.0 -> v2.0.0.33
[00013701][12 00][00] v1.12.0.0 -> v1.12.0.0
[00013792][12 01][00] v1.12.0.0 -> v1.12.0.0
[00013881][12 02][00] v1.12.0.0 -> v1.12.0.0
[00013981][12 03][00] v1.12.0.0 -> v1.12.0.0
[00026531][15 00][00] device not detected.
[00026622][17 00][00] v1.1.1.7 -> v1.1.1.7
[00026736][17 01][00] v1.0.2.7 -> v1.0.2.7
[00026801][19 00][00] v1.0.8.96 -> v1.0.8.96
[00026848][01 00][00] v1.32.5432 -> v1.32.5432
[00026894][01 01][00] v1.32.5432 -> v1.32.5432
[00039448][08 00][00] device not detected.
[00039522][09 00][00] v4.1.0.0 -> v4.1.0.0
[00039567]Packet upgrade failed at version checking.



[00012591]========== remo-con disconnect. boot(15) ============
[00012640]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00012684]Packet upgrade start...

[00012732]Packet checking...
[00012783]Packet vlink 01.11.0020 <-> 01.11.0020.
[00012860]Done.

[00012911]Version checking[1]...
[00013000][03 06][00] v2.4.20.50 -> v2.4.20.50
[00013100][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013153][04 00][00] v1.48.0.0 -> v1.48.0.0
[00013280][11 00][00] v1.8.0.0 -> v1.8.0.0
[00013399][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00013451][11 01][00] v1.8.0.0 -> v2.0.0.33
[00013545][12 00][00] v1.12.0.0 -> v1.12.0.0
[00013648][12 01][00] v1.12.0.0 -> v1.12.0.0
[00013749][12 02][00] v1.12.0.0 -> v1.12.0.0
[00013849][12 03][00] v1.12.0.0 -> v1.12.0.0
[00026391][15 00][00] device not detected.
[00026510][17 00][00] v1.1.1.7 -> v1.1.1.7
[00026747][17 01][00] v1.0.2.7 -> v1.0.2.7
[00026821][19 00][00] v1.0.8.96 -> v1.0.8.96
[00026866][01 00][00] v1.32.5432 -> v1.32.5432
[00026912][01 01][00] v1.32.5432 -> v1.32.5432
[00039465][08 00][00] device not detected.
[00039536][09 00][00] v4.1.0.0 -> v4.1.0.0
[00039581]Packet upgrade failed at version checking.



[00012531]========== remo-con disconnect. boot(15) ============
[00012576]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00012624]Packet upgrade start...

[00012675]Packet checking...
[00012726]Packet vlink 01.11.0020 <-> 01.11.0020.
[00012799]Done.

[00012851]Version checking[1]...
[00012932][03 06][00] v2.4.20.50 -> v2.4.20.50
[00013015][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013069][04 00][00] v1.48.0.0 -> v1.48.0.0
[00013191][11 00][00] v1.8.0.0 -> v1.8.0.0
[00013316][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00013369][11 01][00] v1.8.0.0 -> v2.0.0.33
[00013464][12 00][00] v1.12.0.0 -> v1.12.0.0
[00013564][12 01][00] v1.12.0.0 -> v1.12.0.0
[00013640][12 02][00] v1.12.0.0 -> v1.12.0.0
[00013745][12 03][00] v1.12.0.0 -> v1.12.0.0
[00026293][15 00][00] device not detected.
[00026402][17 00][00] v1.1.1.7 -> v1.1.1.7
[00026525][17 01][00] v1.0.2.7 -> v1.0.2.7
[00026580][19 00][00] v1.0.8.96 -> v1.0.8.96
[00026627][01 00][00] v1.32.5432 -> v1.32.5432
[00026678][01 01][00] v1.32.5432 -> v1.32.5432
[00039226][08 00][00] device not detected.
[00039300][09 00][00] v4.1.0.0 -> v4.1.0.0
[00039355]Packet upgrade failed at version checking.



[00014882]========== remo-con disconnect. boot(15) ============
[00014932]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x280133c2].
[00014983]Packet upgrade start...

[00015036]Packet checking...
[00015081]Packet vlink 01.11.0020 <-> 01.11.0020.
[00015167]Done.

[00015213]Version checking[1]...
[00015301][03 06][00] v2.4.20.50 -> v2.4.20.50
[00015381][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015450][04 00][00] v1.48.0.0 -> v1.48.0.0
[00015663][11 00][00] v1.8.0.0 -> v1.8.0.0
[00015781][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00015838][11 01][00] v1.8.0.0 -> v2.0.0.33
[00015935][12 00][00] v1.12.0.0 -> v1.12.0.0
[00016040][12 01][00] v1.12.0.0 -> v1.12.0.0
[00016124][12 02][00] v1.12.0.0 -> v1.12.0.0
[00016227][12 03][00] v1.12.0.0 -> v1.12.0.0
[00028776][15 00][00] device not detected.
[00028885][17 00][00] v1.1.1.7 -> v1.1.1.7
[00029015][17 01][00] v1.0.2.7 -> v1.0.2.7
[00029087][19 00][00] v1.0.8.96 -> v1.0.8.96
[00029135][01 00][00] v1.32.5432 -> v1.32.5432
[00029189][01 01][00] v1.32.5432 -> v1.32.5432
[00041739][08 00][00] device not detected.
[00041806][09 00][00] v4.1.0.0 -> v4.1.0.0
[00041863]Packet upgrade failed at version checking.

fans94a8fc8f Posted at 2-17 13:23
HI. I have a p3 professional and crashed it and damaged the camera. So I put an advanced camera on it   Brand new. And now I have the esc error. Can u help

Sorry to hear about your crash.  However, the camera  you put on is just a 2.7K camera, and not the 4K camera the Pro comes with.  

The ESC error is a software related issue, that DJI will not release to the general public.  You have to ask for it.

DJI Susan and Thor are handing out the BIN file that fixes this issue on most peoples Phantom 3.

DJI Thor Posted at 6-10 01:14
Hi Dante, I am sorry for the late reply. I had sent you PM, please kindly check.

The upgrade works perfect, thanks

Dante.Pinkman Posted at 6-22 02:40
The upgrade works perfect, thanks

It's great to know the result, thank you for getting back. Happy flying!

DJI Phantom3Pro Posted at 6-10 16:46
I believe I have a firmware issue.  The only indication I have is no image transmission from the camera.  The AC seems to function normally otherwise.  I downloaded the current firmware and with the controller turned off, attempted to "upgrade" the firmware.  I captured the firmware log file on my MAC and is pasted below.  Any suggestions would be most appreciated!

[00012240][01 00] Firmware upgrade finished successfully.

I am sorry for the late reply. For the issue, please provide a screenshot of the DJI GO app and the firmware info (General Settings > About) when connecting the drone and controller for further checking. Thank you.  

been having same esc error after upgrading. Susan sent me the bin it tried to updte but shows failed. but the app is now showing 1.11.20+ and drone still will not start. any other ideas.

Hey DJI Thor, I'm experiencing the same problem. Would you please send me the firmware you talk about?
gmail : ngaithien23@gmail.com

djiuser_JI0H3nD4VPsu Posted at 6-28 19:11
Hey DJI Thor, I'm experiencing the same problem. Would you please send me the firmware you talk about?
gmail :

I've received your message in PM and responded as well, please kindly check later, thanks!

wolfie212 Posted at 6-28 14:03
been having same esc error after upgrading. Susan sent me the bin it tried to updte but shows failed. but the app is now showing 1.11.20+ and drone still will not start. any other ideas.

Sorry for the late response. If the issue remains after updating to V1.11.30, please kindly start a case and send the unit in for diagnosis: https://www.dji.com/support

BTW, if you need one's attention, please kindly click the reply button under one's message, so that he/she can get the reminder and handle it timely, thanks!

Having same ESC Status Error on Phantom 3 Pro.

No crashes. Latest firmware installed.

Can you send me the .bin file that you have sent others that had this same problem?

Why does it take days to have someone send me a simple link?

DJI Susan Posted at 7-4 00:48
Sorry for the late response. If the issue remains after updating to V1.11.30, please kindly start a case and send the unit in for diagnosis: https://www.dji.com/support

BTW, if you need one's attention, please kindly click the reply button under one's message, so that he/she can get the reminder and handle it timely, thanks!

Can I please get a link to the v 1.11.30 bin file please?

djiuser_usMNhFoE7Apx Posted at 7-9 21:20
Can I please get a link to the v 1.11.30 bin file please?

Sorry for the late response. I've sent you a message in PM, please kindly check later, thanks!

Hello, coming into this thread late but I just updated the firmware on my P3P after not flying it for a couple years and now I am getting ESC status error everything. Please help

Hello, i'm having problem with my Phantom 3 pro.Recently i update now it is giving me ESC status error. Anyone can help Please

OI, Bom dia;
possuo o P3/ADV
serial number: P76UDL0282005F
e tenho tido o seguinte mensagem de erro: ESC STATUS ERROR
os motores não ligam
o drone não sofreu queda
ele foi guardado voando normalmente e quando fui usar apareceu este erro
me ajude por favor?

Estou com um phantom 3advanced  com erro de esc disseram que tinha que trocar a placa ai comprei uma e deu o mesmo erro o drone está com a última atualização quem pode me ajudar

I have a 3advanced phantom with an esc error they said I had to change the card there I bought one and it gave the same error the drone has the latest update who can help me

DJI Susan Posted at 2019-7-4 00:48
Sorry for the late response. If the issue remains after updating to V1.11.30, please kindly start a case and send the unit in for diagnosis: https://www.dji.com/support

BTW, if you need one's attention, please kindly click the reply button under one's message, so that he/she can get the reminder and handle it timely, thanks!

Preciso da atualização 1130 estou com o mesmo problema de erro de esc no meu phantom 3advanced meu email é franklinrocha2010@gmail.com